연구동향 분석

Fatigue Crack Tip Plasticity for Inclined Cracks

Hesham El-Emam Alaaeldin Elsisi Hani Salim Hossam Sallam 2018년

논문상세정보
    • 저자 Hesham El-Emam Alaaeldin Elsisi Hani Salim Hossam Sallam
    • 제어번호 106333717
    • 학술지명 International Journal of Steel Structures
    • 권호사항 Vol. 18 No. 2 [ 2018 ]
    • 발행처 한국강구조학회
    • 자료유형 학술저널
    • 수록면 443-455
    • 언어 English
    • 출판년도 2018
    • 등재정보 KCI등재
    • 소장기관 경북대학교 중앙도서관 경상국립대학교 도서관 계명대학교 동산도서관 동국대학교 중앙도서관 부산대학교 중앙도서관 연세대학교 학술문화처 도서관 연세대학교 학술문화처 도서관 영남대학교 과학도서관
    • 판매처
    유사주제 논문( 0)
인용/피인용

' Fatigue Crack Tip Plasticity for Inclined Cracks' 의 참고문헌

  • Yielding of steel containing slits
  • The significance of fatigue crack closure. In Damage tolerance in aircraft structures, ASTM STP486
  • The Stress Analysis of Cracks: Handbook
    Tada, H. [1973]
  • Stress-intensity factors for the tension of an eccentrically cracked strip
    Isida, N. [1966]
  • Stress intensity factors of a shortly kinked slant central crack with frictional surfaces in uniaxially loaded plates
  • Stress intensity factor handbook (Vol. 1)
  • Small crack growth in multiaxial fatigue, vol. 112, ASTM STP2
  • Simulation of mixed mode I/II cyclic deformation at the tip of a short kinked inclined crack with frictional surfaces
  • Significance of crack tip plasticity to early notch fatigue crack growth
  • Plastic zone size in fatigue cracking
    Para, A. F. [1996]
  • Plastic zone size estimation under cyclic loadings using in situ optical microscopy fatigue testing
    Zhang, W. [2011]
  • On the cyclic crack-tip opening displacement
  • Mode II stresses intensity factors for central slant cracks with frictional surfaces in uniaxially compressed plates
  • Mode I notch fatigue crack growth behaviour under constant amplitude loading and due to the application of a single tensile overload
  • Mixed mode fatigue crack growth criteria
    Soh, A. K. [2001]
  • Mechanics of crack tip deformation and extension by fatigue. In Fatigue crack propagation, ASTM STP 415
  • Fatigue of materials (2nd ed.)
    Suresh, S. [1998]
  • Fatigue cracking behavior of 1045 HR steel subjected to mixed-mode I and II loading, Part II: Crack growth behavior and predictions;Multi-axial fatigue of an induction hardened shaft
    Qian, J. [1999]
  • Fatigue crack propagation under non-proportional mixed mode loading
    Plank, R. [1999]
  • Fatigue crack growth under mixed-mode I and II loading
    Qian, J. [1996]
  • Fatigue crack growth studies under mixed-mode loading
  • Fatigue crack growth rates under sequential mixed-mode I and II loading cycles
    Wong, S. L. [2000]
  • Fatigue crack growth behavior of SM45Csteel under mixed-mode I and II loading
    You, B. R. [1998]
  • Fatigue Crack Closure under Cyclic Tension
    Elber, W. [1970]
  • Effects of strain hardening and stress state on fatigue crack closure
    Chang, T. [1999]
  • Deformation behaviour at the tip of physically short fatigue crack due to a single overload
  • Cyclic plastic deformation response at fatigue crack tips
    Paul, S. K. [2013]
  • Correlation of fatigue crack growth by crack tip deformation behavior
  • Composite patch configuration and prestress effect on SIFs for inclined cracks in steel plates
    El-Emam, H. [2017]
  • Composite patch configuration and prestraining effect on crack tip deformation and plastic zone for inclined cracks
    El-Emam, H. [2016]
  • Application of fracture mechanics at and beyond general yielding
  • Analysis of the elastic energy and crack tip opening displacement with increased yield stress
  • ANSYS release 14.5 documentation
  • A CTOD-based mixed-mode fracture criterion. ASTM STP9, vol. 135