The effect of particle size on the edge notched disk (END) using particle flow code in three dimension
활용도 Analysis
논문 Analysis
연구자 Analysis
'
The effect of particle size on the edge notched disk (END) using particle flow code in three dimension' 의 참고문헌
The mutual effects between two unequal collinear cracks under compression
The investigation crack problem through numerical analysis
The fracture behaviour of PMMA in mixed modes I and II
The effect of non-persistent joints on sliding direction of rock slopes
The effect of micro pore on the characteristics of crack tip plastic zone in concrete
The HDD analysis of micro cracks initiation, propagation and coalescence in brittle substances
The Complete ISRM Suggested Methods for Rock Characterization Testing and Monitoring: 1974-2006
Tensil strength behaviour of recycled aggregate concrete
Symmetric plane problems of arbitrarily shaped plates with an edge crack
Suggested methods for determining the fracture toughness of rock
Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of of rock materials
Study of rock dynamic fracture toughness by using VB-SCSC specimens under medium-low speed impacts
Stress-strain behavior and toughness of high-performance steel fiber reinforced mortar in compression
Stress intensity factors for semi-circular specimens under three-point bending
Split tensile strength on self-compacting concrete containing coal bottom ash
Simulating the effect of disc erosion in TBM disc cutters by a semi-infinite DDM
Semi-circular bending test : Simple but useful?
Self-monitoring application of conductive asphalt concrete under indirect tensile deformation
Rock fracture toughness testing using SCB specimen
Quasi-static and dynamic fracture behaviour of rock materials : phenomena and mechanisms
Propagation Mechanism of neighboring cracks in rock-like cylindrical specimens under uniaxial compression
Particle Flow Code in 2 Dimensions
Numerical study on crack propagation in brittle jointed rock mass influenced by fracture water pressure
Numerical simulation of the process of fracture of echelon rock joints
Numerical simulation of tensile failure of concrete in direct, flexural, double punch tensile and ring tests
Numerical and experimental mixed-mode analysis of a compact tension-shear-specimen
Numerical analysis of mixed mode I/II stress intensity factors of edge slant cracked plates
Numerical analysis of a new mixed mode I/III fracture test specimen
New specimen for fracture toughness determination for rock and other materials
New development to measure mode I fracture toughness in rock
Modeling of rock using bonded assemblies of circular particles
Mode I fracture toughness determination with straight notched disk bending method
Mixed-mode fracture: The four-point shear specimen
Mixed mode fracture toughness of ceramic materials
Methods for determining fracture toughness of brittle porous materials
Mechanical and dynamic properties of high strength concrete modified with lightweight aggregates presaturated polymer emulsion
Measuring fracture toughness of crystalline marbles under modes I and II and mixed mode I-II loading conditions using CCNBD and HCCD specimens
Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimen
Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar
Investigating the fracturing process of rock-like Brazilian discs containing three parallel cracks under compressive line loading
Investigating the effects of micro-defects on the dynamic properties of rock using Numerical Manifold method
Influence of softening curves on the residual fracture toughness of post-fire normalstrength mortar
ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen
Fracture toughness of anisotropic rocks by semi-circular bend (SCB) test under water vapor pressure
Fracture toughness in mode I and II of rock under water vapour pressure
Fracture toughness evaluation based on tension-softening model and its application to hydraulic fracturing
Fracture toughness determination of layered materials
Fracture testing of a soft rock with semi-circular specimens under three-point loading, part 1-mode I
Extension of the Compliance and Stress Intensity Formulas for the Single Edge Crack Round Bar in Bending
Extended FEM modelling of crack propagation using the semicircular bending test
Experimental and numerical modelling investigation on fracturing in coal under impact loads
Experimental and numerical analysis of Brazilian discs with multiple parallel cracks
Estimation of the crack width and deformation of FRP-reinforced concrete flexural members with and without transverse shear reinforcement
Estimation of fracture toughness of rocks under water vapour pressure by semi-circular bend(SCB)test
Estimation of fracture toughness of different kinds of rocks under water vapor pressure by SCB test
Estimation of fracture toughness of anisotropic rocks by SCB test and visualization of fracture by means of X-ray CT
Effects of chemical solutions on rockm fracturing
Effect of specimen geometry and testing method on mixed I-II fracture toughness of a limestone rock from Saudi Arabia
Effect of number and configuration of bridges on shear properties of sliding surface
Effect of construction joints on the splitting tensile strength of concrete
Dynamic cracked chevron notched Brazilian disc method for measuring rock fracture parameters
Determination of mode III fracture toughness for different materials using a new designed test configuration
Determination of fracture toughness of anisotropic rocks under water vapour pressure by semi-circular bend test
Combined mode fracture via the cracked Brazilian disc test
Backcalculation of residual tensile strength of regular and high performance fibre reinforced concrete from flexural tests
Analysis of punching shear in high strength RC panels– experiments, comparison with codes and FEM results
An experimental investigation of mixed-mode fracture
An experimental investigation concerning the comprehensive fracture toughness of some brittle rocks
An alternative BEM formulation, based on dipoles of stresses and tangent operator technique, applied to cohesive crack growth modeling
A theoretical analysis about the influence of interfacial friction in SHPB tests
A simplified method for measuring plane strain fracture toughness
A review of experimental and numerical investigations about crack propagation
A numerical and experimental investigation for determining fracture toughness of Welsh limestone
A new mini-grating absolute displacement measuring system for static and dynamic geomechanical model tests
A new approach for measurement of anisotropic tensile strength of concrete
A mixed mode fracture specimen : Analysis and testing
A discrete element model for granular assemblies
A bonded-particle model for rock
A New Core Specimen for the Fracture Toughness Testing of Rock
'
The effect of particle size on the edge notched disk (END) using particle flow code in three dimension'
의 유사주제(
) 논문