연구동향 분석

Microstructure‑Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al–Si (A390) Alloy

Soo?Bae Kim Young?Hee Cho Jae?Gil Jung Woon?Ha Yoon Young?Kook Lee Jung?Moo Lee 2018년

논문상세정보
    • 저자 Soo?Bae Kim Young?Hee Cho Jae?Gil Jung Woon?Ha Yoon Young?Kook Lee Jung?Moo Lee
    • 제어번호 105941019
    • 학술지명 METALS AND MATERIALS International
    • 권호사항 Vol. 24 No. 6 [ 2018 ]
    • 발행처 대한금속·재료학회
    • 발행처 URL http://www.kim.or.kr
    • 자료유형 학술저널
    • 수록면 1376-1385
    • 언어 English
    • 출판년도 2018
    • 등재정보 KCI등재
    • 소장기관 부산대학교 중앙도서관 서울대학교 중앙도서관 연세대학교 학술문화처 도서관 연세대학교 학술문화처 도서관 영남대학교 과학도서관
    • 판매처
    유사주제 논문( 0)
인용/피인용

' Microstructure‑Strengthening Interrelationship of an Ultrasonically Treated Hypereutectic Al–Si (A390) Alloy' 의 참고문헌

  • Ultrasonic Treatment of Light Alloy Melts
    G.I. Eskin [1998]
  • Thixoforming of an automotive part in A390 hypereutectic Al–Si alloy
    P. Kapranos [2003]
  • The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy
    G. Wang [2014]
  • The natural aging and precipitation hardening behaviour of Al–Mg–Si–Cu alloys with different Mg/Si ratios and Cu additions
    L. Ding [2015]
  • The combined effect of melt stirring and ultrasonic agitation on the degassing efficiency of AlSi9Cu3 alloy
    H. Puga [2009]
  • Synergistic effect of ultrasonic melt treatment and fast cooling on the refinement of primary Si in a hypereutectic Al–Si alloy
    J. -G. Jung [2018]
  • Study of ultrasonic melt treatment on the quality of horizontal continuously cast Al–1%Si alloy
    X.T. Li [2006]
  • Solute redistribution during solidification with rapid solid state diffusion
    T.W. Clyne [1981]
  • Solidification of aluminium alloys under ultrasonic irradiation using watercooled resonator
    V. Abramov [1998]
  • Solidification Processing
  • Smithells Metals Reference Book
    [2004]
  • Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium
    G. Wang [2017]
  • Refinement of eutectic silicon phase of aluminum A356 alloy using high-intensity ultrasonic vibration
    X. Jian [2006]
  • Multifrequency ultrasonic structural actuators
  • Morphologies of primary silicon in hypereutectic Al-Si alloys with melt overheating temperature and cooling rate
    C. L. Xu [2006]
  • Modification of solidification microstructure in hypo- and hyper-eutectic Al–Si alloys under high-intensity ultrasonic irradation
  • Modelling of the age hardening behaviour of Al–Mg–Si alloys
    O.R. Myhr [2001]
  • Microstructure-yield strength models for heat treatment of Al–Si–Mg casting alloy II: modelling microstructure and yield strength evolution
    L.J. Colley [2014]
  • Liquid Metal Processing
  • Light Metals 2012
    L. Zhang [2012]
  • Influence of ultrasonic treatment on the microstructure of hypoeutectic Al–17wt%Si alloys
    Y.-H. Cho [2014]
  • Influence of ultrasonic melt treatment on microstructure and mechanical properties of AlSi9Cu3 alloy
    H. Puga [2011]
  • Influence of indirect ultrasonic vibration on the microstructure and mechanical behavior of Al–Si–Cu alloy
    H. Puga [2013]
  • Improved mechanical properties of near-eutectic Al–Si piston alloy through ultrasonic melt treatment
    J. G. Jung [2016]
  • FactSage
  • Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl
    R. Chen [2017]
  • Effects of silicon additions on aging behaviour of Al–1.52Cu–0.75Mg alloy
    A.K. Gupta [1989]
  • Effect of power ultrasound on solidification of aluminum A356 alloy
    X. Jian [2005]
  • Effect of phosphorus additions on the spacing between primary silicon particles in a Bridgman solidified hypereutectic Al–Si alloy
    W.J. Kyffin [2001]
  • Effect of melt overheating, cooling and solidification rates on Al–16wt%Si alloy structure
    P. Li [2002]
  • Effect of high-intensity ultrasonic irradiation on the modification of solidification microstructure in a Sirich hypoeutectic Al–Si alloy
    A. Das [2011]
  • Criteria of grain refinement induced by ultrasonic melt treatment of aluminum alloys containing Zr and Ti
  • Cooling rate and microstructure of rapidly solidified Al–20wt%Si alloy
    C.L. Xu [2006]
  • Cavitation mechanism of ultrasonic melt degassing
    G. I. Eskin [1995]
  • Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloys
    G. I. Eskin [2001]
  • Aluminum Alloys: Structure and Properties