연구동향 분석

아크 열원을 이용한 스틸과 알루미늄의 이종접합에 관한 연구(Ⅰ) - 이종접합 연구동향 및 공정 비교 -

김용 이보영 2018년

논문상세정보
인용/피인용

' 아크 열원을 이용한 스틸과 알루미늄의 이종접합에 관한 연구(Ⅰ) - 이종접합 연구동향 및 공정 비교 -' 의 참고문헌

  • 툴 경로제어를 이용한 Al/Fe 이종금속 마찰교반점용접 공정특성 평가
  • 차체 소재 다변화에 따른 체결 및 접합기술
  • 저항점용접된 Al5052/DP590 이종소재의 특성평가 및 공정의 최적화
    조범지 [2015]
  • 자동차 경량화 기술동향과 개발전략
    최성배 [2013]
  • 원자력발전소용 니켈기 초내열합금 (Alloy718)의 마찰용접 최적화와 그 기계적 특성에 관한 연구
    권상우 [2009]
  • 용접접합 용어사전
  • 스틸과 알루미늄의 아크 이종접합
    김용 [2010]
  • “알루미늄 용접의 현장기술”
  • Wetting of galvanized steel by Al 4043 alloys in the first cycle of CMT process
    Yanlin Zhou [2014]
  • Welding of aluminum alloy to zinc coated steel by cold metal transfer
  • Welding and bonding of dissimilar metal steel & non-ferrous metal
    H. S. Park [1996]
  • Ultrasonic welding between mild steel sheet and Al–Mg alloy sheet
  • Two-pass laser welding of galvanized high-strength dual-phase steel for a zero-gap lap joint configuration
    Junjie Ma [2013]
  • The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel
    H.T. Zhang [2009]
  • Suppression of intermetallic reaction layer formation by controlling heat flow in dissimilar joining of steel and aluminum alloy
  • Spot Welding of Aluminum and Steel Sheet (I). Spot Welding of Aluminum and Steel Sheet with insert of Aluminum Clad Steel Sheet
  • Shear strength of CMT brazed lap joints between aluminum and zinc-coated steel
    Jian Lin [2013]
  • Role of welding parameters on interfacial bonding in dissimilar steel/aluminum friction stir welds
    Z. Shen [2015]
  • Resistance spot welding of steel and aluminium sheet using insert metal sheet
    H. Oikawa [2013]
  • Resistance spot welding of aluminum alloy to steel with transition material - from process to performance - part I: experimental study
    X. Sun [2004]
  • Quantitative characterization of porosity in Fe–Al dissimilar materials lap joint made by gas metal arc welding with different current modes
    Yongchao Su [2014]
  • Overlap conduction laser welding of aluminium to steel
    S. Meco [2013]
  • Optimised design of electrode morphology for novel dissimilar resistance spot welding of aluminium alloy and galvanised high strength steel
  • Numerical simulation of large spot laser + MIG arc brazing–fusion welding of Al alloy to galvanized steel
  • Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process
  • Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding
    Yao Liu [2012]
  • Microstructure and Properties of Lap Joint Between Aluminum Alloy and Galvanized Steel by CMT
    Song Niu [2016]
  • Laser-welded Dissimilar Steel-aluminum Seams for Automotive Lightweight Construction
    M. Schimek [2012]
  • Large spot laser assisted GMA brazing–fusion welding of aluminum alloy to galvanized steel
  • Joining of aluminum alloy to steel by friction stir welding
  • Joining of aluminum alloy 5052 and low-carbon steel by laser roll welding
    M.J. Rathod [2004]
  • Joining aluminum to steel, with particular reference to welding
    D. Achar [1980]
  • Joining Al 5052 alloy to aluminized steel sheet using cold metal transfer process
  • Interfacial microstructure and mechanical properties of aluminium–zinc-coated steel joints made by a modified metal inert gas welding–brazing process
    H.T. Zhang [2007]
  • Interfacial Microstructure and Strength of Steel to Aluminum Alloy Lap Joints Welded by a Defocused Laser Beam
  • Influence of intermetallic phases and Kirkendall-porosity on the mechanical properties of joints between steel and aluminium alloys
    H. Springer [2011]
  • Influence of filler wire and wire feed speed on metallurgical and mechanical properties of MIG welding–brazing of automotive galvanized steel/5754 aluminum alloy in a lap joint configuration
  • Influence of energy induced from processing parameters on the mechanical properties of friction stir welded lap joint of aluminum to coated steel sheet
  • Influence of alloy elements on microstructure and mechanical property of aluminum–steel lap joint made by gas metal arc welding
    Yongchao Su [2014]
  • Influence of Filler Composition on the Microstructure and Mechanical Properties of Steel-Aluminum Joints Produced by Metal Arc Joining
  • Hardness and tensile properties of dissimilar welds joints between SAF 2205 and AISI 316L
  • Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications
  • Galvanised steel to aluminium joining by laser and GTAW processes
    G. Sierra [2008]
  • Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructure
    R.S. Coelho [2012]
  • Friction welding of aluminum and aluminum alloys with steel
    Ambroziak A [2014]
  • Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel
  • Friction Stir Welding of Dissimilar Materials, An Overview
  • Fluxless arc weld-brazing of aluminium alloy to steel
  • Effects of zinc on the laser welding of an aluminum alloy and galvanized steel
    Liu Jia [2015]
  • Effects of sheet surface conditions on electrode life in resistance welding aluminium
    Z. LI [2007]
  • Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding
    M Movahedi [2013]
  • Effect of process parameters on joint properties in laser MIG hybrid welding of aluminum to steel
    C. Thomy [2009]
  • Effect of joining parameters on microstructure of dissimilar metal joints between aluminum and galvanized steel
    L. Shao [2015]
  • Effect of inserted strips on electrode degradation in resistance spot welding
    Y. Y. ZHAO [2014]
  • Effect of bevel angle on microstructure and mechanical property of Al/steel butt joint using laser welding-brazing method
    Junhao Sun [2016]
  • Effect of annealing treatment on joint strength of aluminum/steel friction stir lap weld
    M. Movahedi [2013]
  • Dissimilar welding of carbon steel to 5754 aluminum alloy by Nd:YAG pulsed laser
  • Dissimilar metal welding of steel to Al-Mg alloy by spot resistance welding
    I.H. Hwang [2006]
  • Dissimilar metal joining of aluminum alloy to galvanized steel with Al–Si, Al–Cu, Al–Si–Cu and Zn–Al filler wires
  • Dissimilar material joining using laser (aluminum to steel using zinc-based filler wire)
  • Dissimilar Joining of Aluminum Alloy and Steel by Resistance Spot Welding
  • Cold metal transfer spot plug welding of AA6061-T6-to-galvanized steel for automotive applications
    R. Cao [2014]
  • Cold metal transfer joining aluminum alloys-to-galvanized mild steel
    R. Cao [2013]
  • Cold metal transfer has a future joining steel to aluminum
    J. Bruckner [2005]
  • Characterization of intermetallics in aluminum to zinc coated interstitial free steel joining by pulsed MIG brazing for automotive application
  • Brazability of dissimilar metals tungsten inert gas butt welding–brazing between aluminum alloy and stainless steel with Al–Cu filler metal
    S.B. Lin [2010]
  • Automotive Circle International Euro Car Body 2015
    [2015]
  • Application of laser in seam welding of dissimilar steel to aluminium joints for thick structural components
    S. Meco [2015]
  • Application of an FSW continuous welding technology for steel and aluminum to an automotive subframe
  • Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
    Xun Liu [2014]
  • An investigation of mechanical and metallurgical properties of explosive welded aluminum–dual phase steel
  • Advances in friction welding process: a review
    M. B. Uday [2013]
  • A Hybrid Joining Technology for Aluminum/Zinc Coated Steels in Vehicles
    C.Y. Choi [2010]
  • (A)Study on the dissimilar materials welding of steel and aluminum alloys by Nd-YAG laser
    주성민 [2005]