연구동향 분석

An experimental study on the heat transfer and pressure drop characteristics of electronics cooling heat sinks with FC-72 flow boiling

김창훈 이민주 박창용 2018년

논문상세정보
    • 저자 김창훈 이민주 박창용
    • 제어번호 105151888
    • 학술지명 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
    • 권호사항 Vol. 32 No. 3 [ 2018 ]
    • 발행처 대한기계학회
    • 자료유형 학술저널
    • 수록면 1449-1462
    • 언어 English
    • 출판년도 2018
    • 등재정보 KCI등재
    • 판매처
    유사주제 논문( 0)
인용/피인용

' An experimental study on the heat transfer and pressure drop characteristics of electronics cooling heat sinks with FC-72 flow boiling' 의 참고문헌

  • 컴퓨터 CPU 냉각용 미세채널 워터블록의 열성능에 관한 연구
    권오경 [2008]
  • 워터블록 내부형상에 따른 수냉식 전자부품 냉각장치성능변화에 관한 실험적 연구
    함형창 [2013]
  • 미세채널 워터블록의 유입부 형상에 따른 유량분배 및 열유동 특성
    최미진 [2009]
  • simple friction pressure drop correlation for two-phase flow in pipes
  • Water cooled minichannel heat sinks for microprocessor cooling: Effect of fin spacing
    S. A. Jajja [2014]
  • Vapor compression refrigeration cycle for electronics cooling- Part I: Dynamic modeling and experimental validation
    J. Catano [2013]
  • Two-phase mini-thermosyphon electronics cooling: Dynamic modeling, experimental validation and application to 2U servers
    N. Lamaison [2017]
  • Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II-heat transfer characteristics
    J. Lee [2005]
  • Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I-pressure drop characteristics
    J. Lee [2005]
  • Two-phase cooling characteristics of a saturated free falling circular jet of HFE7100 on a heated disk: Effect of jet length
  • Transient microscale flow boiling heat transfer characteristics of HFE-7000
    S. Basu [2015]
  • Thermoelectric self-cooling for power electronics: Increasing the cooling power
    A. Martinez [2016]
  • Thermal performance of heat spreader for electronics cooling with incorporated phase change material
    M. Jaworski [2012]
  • Thermal modeling, analysis, and management in VLSI circuits: Principles and methods
    M. Pedram [2006]
  • The effect of aspect ratio on flow boiling heat transfer of HFE-7100 in a microchannel heat sink
    B.-R. Fu [2013]
  • State of the art of efficient pumped two-phase flow cooling technologies
  • Stacked microchannel heat sinks for liquid cooling of microelectronic components
    Y. Wei [2004]
  • Small Circular- and Rectangular-channel Boiling with Two Refrigerants
    T. N. Tran [1996]
  • Simplified general correlation for saturated flow boiling and comparison with data
  • Saturated flow boiling of FC-72 in 1 mm diameter tube
  • Review: General Issues and Correlations for Predicting Flow Boiling Heat Transfer Coefficients in Micro-Scale Channels
    박창용 [2015]
  • Reliability prediction of electronic equipment, MILHDBK-2178B
  • Principles of heat and mass transfer, Seventh Edition
  • Piezoelectric oscillating cantilever fan for thermal management of electronics and LEDs - A review
    M. Maaspuro [2016]
  • Performance of a thermoelectric cooling system integrated with a gravity-assisted heat pipe for cooling electronics
    X. Sun [2017]
  • On-chip thermal management with microchannel heat sinks and integrated micropumps
  • On microchannel shapes in liquid-cooled electronics applications
  • Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations
    D. Yang [2017]
  • Nucleate boiling of FC-72 and HFE-7100 on porous graphite at different orientations and liquid subcooling
  • Nucleate boiling heat transfer enhancement for water and FC-72 on titanium oxide and silicon oxide surfaces
    W. Wu [2010]
  • Nucleate boiling and critical heat flux of HFE-7100 in horizontal narrow spaces
    M. Misale [2011]
  • Miniature loop heat pipes-a promising means for electronics cooling
  • Microjet array single-phase and flow boiling heat transfer with R134a
  • Local two-phase heat transfer from arrays of confined and submerged impinging jets
    M. J. Rau [2013]
  • Liquid cooling of non-uniform heat flux of a chip circuit by subchannels
  • Jet impingement heat transfer using a Field's alloy nanoparticle- HFE7100 slurry
    W. Wu [2014]
  • Investigation of self-similar heat sinks for liquid cooled electronics
  • Influences of nozzle-plate spacing on boiling heat transfer of confined planar dielectric liquid impinging jet
    C. H. Shin [2009]
  • Improved friction pressure correlations for horizontal and vertical two-phase pipe flow
    L. Friedel [1979]
  • Impact of surface enhancements upon boiling heat transfer in a liquid immersion cooled high performance small form factor server model
    J. Gess [2014]
  • Immersion cooling nucleate boiling of high power computer chips
  • Heat transfer floe regimes of refrigerants in a horizontal-tube evaporator, ACRC TR-55
  • Heat transfer characteristics of submerged jet impingement boiling of saturated FC-72
    R. Cardenas [2012]
  • Heat Transfer and Pressure Drop in Narrow Rectangular Channels
  • HFE-7100 pool boiling heat transfer and critical heat flux in inclined narrow spaces
    M. Misale [2009]
  • Flow boiling heat transfer of refrigerant FC-72 in microchannels
    L. Saraceno [2012]
  • Flow boiling heat transfer of R134a in the multiport minichannel heat exchangers
  • Flow boiling heat transfer of HFE-7000 in nanowire-coated microchannels
    F. Yang [2016]
  • Flow boiling heat transfer coefficients and pressure drop of FC-72 in microchannels
    C. Y. Park [2012]
  • Flow boiling heat transfer and pressure drop of pure HFG-152a in a horizontal mini-channel
    M. Hamdar [2010]
  • Flow boiling enhancement of FC-72 from microporous surfaces in minichannels
    Y. Sun [2011]
  • FC72 and FC87 nucleate boiling inside a narrow horizontal space
  • Experimental study of flow boiling of FC-72 in parallel minichannels under subatmospheric pressure
    X. Hu [2011]
  • Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces
    S. Ndao [2012]
  • Evaluation of Various Channel Shapes of a Microchannel Heat Sink
  • Enhancement of pool boiling critical heat flux in dielectric liquids by microporous coatings
    M. Arik [2007]
  • Enhanced flow boiling heat transfer with jet impingement on micro-pin-finned surfaces
    D. Guo [2011]
  • Enhanced boiling of FC-72 on silicon chips with micro-pin-fins and submicron-scale roughness
    H. Honda [2002]
  • Engineering equation solver
    S. A. Klein [2013]
  • Energy efficient hotspot-targeted embedded liquid cooling of electronics
  • Electronics manufacturing initiative technology roadmap
  • Effects of jet pattern on two-phase performance of hybrid micro-channel/micro-circularjet- impingement thermal management scheme
    M. K. Sung [2009]
  • Effect of system and operational parameters on the performance of an immersion-cooled multichip module for high performance computing
  • Effect of sub-cooling on performance of a multi-jet two phase cooler with multi-scale porous surfaces
    S. N. Joshi [2015]
  • Effect of inclination on the convective boiling performance in microchannel heat sink using HFE-7100
    C.-C. Wang [2012]
  • Effect of inclination on saturation boiling of PF-5060 dielectric liquid on 80- and 137-lm thick copper micro-porous surfaces
    A. F. Ali [2012]
  • Design, fabrication and test of an integrated multi-microchannel heatsink for electronics cooling
    V. Silverio [2015]
  • Design and experimental study of a miniature vapor compression refrigeration system for electronics cooling
    Z. Wu [2011]
  • Describing the uncertainties in experimental results
    R.J. Moffat [1988]
  • Correlations of two-phase friction for refrigerants in small diameter tubes
    M. Zhang [2001]
  • Correlations for the prediction of boiling heat transfer in small-diameter channels
    P. A. Kew [1997]
  • Correlation for boiling heat transfer of R-134a in horizontal tubes including effect of tube diameter
    S. Saitoh [2007]
  • Cooling of electronic equipment
    W. A. Scott [1974]
  • Conventional Refrigeration Systems Using Phase Change Material: A Review
  • Convective performance of nanofluids in commercial electronics cooling systems
  • Condensation heat transfer and pressure drop of refrigerant R-134a in a small pipe
    Y.-Y. Yan [1999]
  • Combination of heat storage and thermal spreading for high power portable electronics cooling
    Z.-W. Li [2016]
  • Application of refrigeration system in electronics cooling
  • An investigation into flow and heat transfer of an ultrasonic micro-blower device for electronics cooling applications
    O. Ghaffari [2016]
  • An experimental study of two-phase multiple jet cooling on finned surfaces using a dielectric fluid
    L.-H. Chien [2011]
  • An experimental study of inclination on the boiling heat transfer characteristics in a micro-channel heat sink using HFE-7100
    L.-C. Hsu [2015]
  • An evaluation of prediction methods for saturated flow boiling heat transfer in mini-channels
    L. Sun [2009]
  • An Experimental Investigation of Condensation Heat Transfer Coefficients and Pressure Drops of Refrigerants Inside Multiport Mini-channel Tubes
    PHAMQUANGVU [2017]
  • A new correlation for heat transfer during boiling flow through pipes
    M. M. Shah [1976]
  • A liquid-based system for CPU cooling implementing a jet array impingement waterblock and a tube array remote heat exchanger
  • A general correlation for saturated and subcooled flow boiling in tubes and annuli
    Z. Liu [1991]
  • A general correlation for evaporative heat transfer in micro/mini-channels
    W. Li [2010]
  • A critical review of traditional and emerging techniques and fluids for electronics cooling
  • A composite heat transfer correlation for saturated flow boiling in small channels
  • A closed-loop electronics cooling by implementing single phase impinging jet and mini channels heat exchanger
  • A Review of Prediction Methods for Two-Phase Pressure Loss in Mini/Micro-Channels
    윤정훈 [2016]