연구동향 분석

상온과 343℃에서 Alloy 690TT 증기발생기 전열관의 인장물성치 평가

엄기현(Ki Hyeon Eom) 김진원(Jin Weon Kim) 2014년

논문상세정보
인용/피인용
' 상온과 343℃에서 Alloy 690TT 증기발생기 전열관의 인장물성치 평가' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 기계공학
  • alloy690tt(690tt합금)
  • designtemperature(설계온도)
  • ringspecimen(링시편)
  • steamgeneratortube(증기발생기세관)
  • tensileproperty(인장물성치)
  • tubespecimen(튜브시편)
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
927 0

0.0%

' 상온과 343℃에서 Alloy 690TT 증기발생기 전열관의 인장물성치 평가' 의 참고문헌

  • Steam Generator Degradation Specific Management Flaw Handbook
    EPRI [2001]
  • Standard Test Methods for Tension Testing of Metallic Materials
    ASTM International
  • Revisiting the Method to Obtain the Mechanical Properties of Hydrided Fuel Cladding in the Hoop Direction
    Martin-Rengel, M. A. J. Nucl. Mater 429 : 276 ~ 283 [2012]
  • Mechanical Metallurgy
    Dieter, G.E McGraw-Hill : 283 ~ 289 [1988]
  • Manifestations of DSA in Austenitic Stainless Steels and Inconel Alloys
    Ivanchenko, M. Proc. of the 20th International Conference on Strength Mechanics in Reactor Technology (SMiRT 20) [2009]
  • Hydride Embrittlement and Irradiation Effects on the Hoop Mechanical Properties of Pressurized Water Reactor (PWR) and Boiling-Water Reactor (BWR) Zircaloy Cladding Tubes: Part 1. Hydride Embrittlement in Stress-Relieved, Annealed, and Recrystallized Zircaloys at 20oC and 300oC
    Arsene, S Metal. and Mater. Trans. A 34A : 553 ~ 566 [2003]
  • Evaluation of the Tensile Properties of a Steam Generator Tube
    Cho, S.-K Proc. of 2012 KSME Spring meeting : 457 ~ 462 [2005]
  • Dynamic Strain Aging of Ni-base Alloys Inconel 600 and 690
    Aaltonen, P. Ehrnsten, U. Hanninen, H. Ivanchenko, M. Nevdacha, V. Yagodzinskyy, Y. Proc. of the 12th ICEDM in Nuclear Power System Water Reactors : 1423 ~ 1430 [2005]
  • Development of Technologies for Improving Integrity of Axial ODSCC in OPR100Steam generator
    KHNP [2013]
  • Assessment of Plastic Collapse Behavior for Tubes with Collinear Cracks
    Moon, S. -I. Eng. Frac. Mech 73 : 296 ~ 308 [2006]
  • ASME B&PV Code Sec. II, “Materials
    ASME [2004]
  • ABAQUS User manual, version 6.12
    Hibbitt, Karlson & Sorensen [2013]