연구동향 분석

Fault Detection and Position Estimation of Permanent Magnet Synchronous Motor Using Novel Planar Search Coil = 새로운 평면형 서치 코일을 이용한 영구자석 동기 전동기의 고장 감지 및 위치 추정

임준혁 2022년

논문상세정보
인용/피인용
' Fault Detection and Position Estimation of Permanent Magnet Synchronous Motor Using Novel Planar Search Coil = 새로운 평면형 서치 코일을 이용한 영구자석 동기 전동기의 고장 감지 및 위치 추정' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • Eccentricity fault
  • Fault diagnosis
  • Planar search coil
  • permanent-magnet synchronous motor
  • rotor position estimation
  • 고장 진단
  • 서치 코일
  • 영구자석 동기 전동기
  • 편심 고장
  • 회전자 위치 추정
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
215 0

0.0%

' Fault Detection and Position Estimation of Permanent Magnet Synchronous Motor Using Novel Planar Search Coil = 새로운 평면형 서치 코일을 이용한 영구자석 동기 전동기의 고장 감지 및 위치 추정' 의 참고문헌

  • `` Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors
    J. Hong vol . 48 , no . 3 , pp . 923-932 [2012]
  • `` Characteristic Analysis of Interior Permanent-Magnet Synchronous Motor in Electrohydraulic Power Steering Systems
    J. Hur , vol . 55 , no . 6 , pp . 2316-2323 [2008]
  • `` A New Position and Speed Estimation Scheme for Position Control of PMSM Drives Using Low-Resolution Position Sensors ,
    Q. Ni , vol . 55 , no . 4 , pp . 3747-3758 , Jul./Aug . [2019]
  • [9] J. Zhao, X. Guan, C. Li, Q. Mou and Z. Chen, "Comprehensive Evaluation of Inter-Turn Short Circuit Faults in PMSM Used for Electric Vehicles," IEEE Transactions on Intelligent Transportation Systems, vol. 22, no. 1, pp. 611-621, Jan. 2021.
  • [8] Z. Ullah and J. Hur, "Analysis of Inter-Turn-Short Fault in an FSCW IPM Type Brushless Motor Considering Effect of Control Drive," IEEE Transactions on Industry Applications, vol. 56, no. 2, pp. 1356-1367, March-April 2020.
    [2020]
  • [7] K. Kim, J. Park, J. Hur and B. Kim, "Comparison of the Fault Characteristics of IPMType and SPM-Type BLDC Motors Under Inter-Turn Fault Conditions Using Winding Function Theory," IEEE Transactions on Industry Applications, vol. 50, no. 2, pp. 986-994, March-April 2014.
    [2014]
  • [76] Z. Xu, T. Zhang, Y. Bao, H. Zhang and C. Gerada, "A Nonlinear Extended State Observer for Rotor Position and Speed Estimation for Sensorless IPMSM Drives," IEEE Trans. Power Electron., vol. 35, no. 1, pp. 733-743, Jan. 2020.
    [2020]
  • [75] D. Chen, J. Li, J. Chen and R. Qu, "On-Line Compensation of Resolver Periodic Error for PMSM Drives," IEEE Trans. Ind. Appl., vol. 55, no. 6, pp. 5990-6000, Nov./Dec. 2019.
    [2019]
  • [74] J. Linares-Flores, C. García-Rodríguez, H. Sira-Ramírez and O. D. Ramírez-Cárdenas, "Robust Backstepping Tracking Controller for Low-Speed PMSM Positioning System: Design, Analysis, and Implementation," IEEE Trans. Ind. Inform., vol. 11, no. 5, pp. 1130- 1141, Oct. 2015.
    [2015]
  • [73] C. Lascu and G. Andreescu, "PLL Position and Speed Observer With Integrated Current Observer for Sensorless PMSM Drives," IEEE Trans. Ind. Electron., vol. 67, no. 7, pp. 5990- 5999, Jul. 2020.
    [2020]
  • [72] L. Wang, Q. Jiang, L. Hong, C. Zhang and Y. Wei, "A Novel Phase-Locked Loop Based on Frequency Detector and Initial Phase Angle Detector," IEEE Trans. Power Electron., vol. 28, no. 10, pp. 4538-4549, Oct. 2013.
    [2013]
  • [71] L. Dong, J. Jatskevich, Y. Huang, M. Chapariha and J. Liu, "Fault Diagnosis and Signal Reconstruction of Hall Sensors in Brushless Permanent Magnet Motor Drives," IEEE Transactions on Energy Conversion, vol. 31, no. 1, pp. 118-131, March 2016.
    [2016]
  • [70] A. Mousmi, A. Abbou and Y. El Houm, "Binary Diagnosis of Hall Effect Sensors in Brushless DC Motor Drives," IEEE Transactions on Power Electronics, vol. 35, no. 4, pp. 3859-3868, April 2020.
    [2020]
  • [6] J. Park and J. Hur, "Detection of Inter-Turn and Dynamic Eccentricity Faults Using Stator Current Frequency Pattern in IPM-Type BLDC Motors," IEEE Transactions on Industrial Electronics, vol. 63, no. 3, pp. 1771-1780, March 2016.
    [2016]
  • [69] H. Seol, J. Lim, D. Kang, J. S. Park and J. Lee, "Optimal Design Strategy for Improved Operation of IPM BLDC Motors With Low-Resolution Hall Sensors," IEEE Trans. Ind. Electron., vol. 64, no. 12, pp. 9758-9766, Dec. 2017.
    [2017]
  • [67] S. Jung and K. Nam, "PMSM Control Based on Edge-Field Hall Sensor Signals Through ANF-PLL Processing," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5121-5129, Nov. 2011.
    [2011]
  • [66] G. Liu, B. Chen and X. Song, "High-Precision Speed and Position Estimation Based on Hall Vector Frequency Tracking for PMSM With Bipolar Hall-Effect Sensors," IEEE Sensors Journal, vol. 19, no. 6, pp. 2347-2355, 15 Mar. 15, 2019.
    [2019]
  • [65] X. Song, J. Fang and B. Han, "High-Precision Rotor Position Detection for High-Speed Surface PMSM Drive Based on Linear Hall-Effect Sensors," IEEE Trans. Power Electron., vol. 31, no. 7, pp. 4720-4731, Jul. 2016.
    [2016]
  • [64] J. Hu, J. Zou, F. Xu, Y. Li and Y. Fu, "An Improved PMSM Rotor Position Sensor Based on Linear Hall Sensors," IEEE Trans. Mag., vol. 48, no. 11, pp. 3591-3594, Nov. 2012.
    [2012]
  • [63] S. Kim, C. Choi, K. Lee and W. Lee, "An Improved Rotor Position Estimation With Vector-Tracking Observer in PMSM Drives With Low-Resolution Hall-Effect Sensors," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4078-4086, Sept. 2011.
    [2011]
  • [62] A. Lidozzi, L. Solero, F. Crescimbini and A. Di Napoli, "SVM PMSM Drive With Low Resolution Hall-Effect Sensors," IEEE Trans. Power Electron, vol. 22, no. 1, pp. 282-290, Jan. 2007.
    [2007]
  • [61] S. Lee, Y. Kim and J. Hur, "Pseudo-sensorless control of PMSM with linear hall-effect sensor," 2017 IEEE Energy Conversion Congress and Exposition (ECCE), Cincinnati, OH, 2017.
    [2017]
  • [60] M. Aqil and J. Hur, "A Direct Redundancy Approach to Fault-Tolerant Control of BLDC Motor With a Damaged Hall-Effect Sensor," IEEE Transactions on Power Electronics, vol. 35, no. 2, pp. 1732-1741, Feb. 2020.
    [2020]
  • [5] J. Faiz and M. Ojaghi, "Stator Inductance Fluctuation of Induction Motor as an Eccentricity Fault Index," IEEE Transactions on Magnetics, vol. 47, no. 6, pp. 1775-1785, June 2011.
    [2011]
  • [59] K. Wang and Z. Wu, "Oversampling Synchronous Envelope Detection for Resolver-to- Digital Conversion," IEEE Transactions on Industrial Electronics, vol. 67, no. 6, pp. 4867- 4876, June 2020.
    [2020]
  • [58] Z. Nasiri-Gheidari and F. Tootoonchian, "Axial Flux Resolver Design Techniques for Minimizing Position Error Due to Static Eccentricities," IEEE Sensors Journal, vol. 15, no. 7, pp. 4027-4034, July 2015.
    [2015]
  • [57] S. S. Mohan, M. del Mar Hershenson, S. P. Boyd and T. H. Lee, "Simple accurate expressions for planar spiral inductances," IEEE Journal of Solid-State Circuits, vol. 34, no. 10, pp. 1419-1424, Oct. 1999.
    [1999]
  • [56] Han-Sam Cho and Hyun-Kyo Jung, "Analysis and design of synchronous permanentmagnet planar motors," IEEE Trans. on Energy Conversion, vol. 17, no. 4, pp. 492-499, Dec. 2002.
    [2002]
  • [55] J. -H. Im and J. Hur, "Proposing New Planar-Type Search Coil for Permanent Magnet Synchronous Motor: Design and Application for Position Estimation," IEEE Access, vol. 9, pp. 129078-129087, 2021.
  • [54] Y. Park, H. Choi, J. Shin, J. Park, S. B. Lee and H. Jo, "Airgap Flux Based Detection and Classification of Induction Motor Rotor and Load Defects During the Starting Transient," IEEE Transactions on Industrial Electronics, vol. 67, no. 12, pp. 10075-10084, Dec. 2020.
    [2020]
  • [53] K. Kim, S. Lee and J. Hur, "Diagnosis Technique Using a Detection Coil in BLDC Motors With Interturn Faults," IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 885-888, Feb. 2014.
    [2014]
  • [52] K. Kang, J. Song, C. Kang, S. Sung and G. Jang, "Real-Time Detection of the Dynamic Eccentricity in Permanent-Magnet Synchronous Motors by Monitoring Speed and Back EMF Induced in an Additional Winding," IEEE Transactions on Industrial Electronics, vol. 64, no. 9, pp. 7191-7200, Sept. 2017.
    [2017]
  • [51] D. G. Dorrell and A. Salah, "Detection of Rotor Eccentricity in Wound Rotor Induction Machines Using Pole-Specific Search Coils," IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.
    [2015]
  • [50] J. Shin, Y. Park and S. B. Lee, "Flux-Based Detection and Classification of Induction Motor Eccentricity, Rotor Cage, and Load Defects," IEEE Transactions on Industry Applications, vol. 57, no. 3, pp. 2471-2480, May-June 2021.
  • [4] B. M. Ebrahimi, J. Faiz and M. J. Roshtkhari, "Static-, Dynamic-, and Mixed- Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous Motors," IEEE Transactions on Industrial Electronics, vol. 56, no. 11, pp. 4727-4739, Nov. 2009.
    [2009]
  • [49] S. B. Lee, J. Shin, Y. Park, H. Kim and J. Kim, "Reliable Flux-Based Detection of Induction Motor Rotor Faults From the Fifth Rotor Rotational Frequency Sideband," IEEE Transactions on Industrial Electronics, vol. 68, no. 9, pp. 7874-7883, Sept. 2021.
  • [48] L. D. Tornello et al., "Combined Rotor-Position Estimation and Temperature Monitoring in Sensorless, Synchronous Reluctance Motor Drives," IEEE Transactions on Industry Applications, vol. 55, no. 4, pp. 3851-3862, July-Aug. 2019.
    [2019]
  • [47] Y. Kwon, S. Sul, N. A. Baloch, S. Morimoto and M. Ohto, "Design, Modeling, and Control of an IPMSM With an Asymmetric Rotor and Search Coils for Absolute Position Sensorless Drive," IEEE Trans. Ind. Appl., vol. 52, no. 5, pp. 3839-3850, Sept.-Oct. 2016.
    [2016]
  • [46] Y. Da, X. Shi and M. Krishnamurthy, "A Novel Universal Sensor Concept for Survivable PMSM Drives," IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5630-5638, Dec. 2013.
    [2013]
  • [45] V. Gurusamy, K. H. Baruti, M. Zafarani, W. Lee and B. Akin, "Effect of Magnets Asymmetry on Stray Magnetic Flux Based Bearing Damage Detection in PMSM," IEEE Access, vol. 9, pp. 68849-68860, 2021.
  • [44] M. Kim, B. Kim, J. Moon, Y. Cho, D. Hwang and D. Kang, "Analysis of Inverter-Fed Squirrel-Cage Induction Motor During Eccentric Rotor Motion Using FEA," IEEE Transactions on Magnetics, vol. 44, no. 6, pp. 1538-1541, June 2008.
    [2008]
  • [43] T. Wang, Z. Liu, G. Lu and J. Liu, "Temporal-Spatio Graph Based Spectrum Analysis for Bearing Fault Detection and Diagnosis," IEEE Transactions on Industrial Electronics, vol. 68, no. 3, pp. 2598-2607, March 2021.
    [2021]
  • [42] A. Aggarwal, I. M. Allafi, E. G. Strangas and J. S. Agapiou, "Off-Line Detection of Static Eccentricity of PMSM Robust to Machine Operating Temperature and Rotor Position Misalignment Using Incremental Inductance Approach," IEEE Transactions on Transportation Electrification, vol. 7, no. 1, pp. 161-169, March 2021.
    [2021]
  • [41] M. Shakouhi, M. Mohamadian and E. Afjei, "Fault-Tolerant Control of Brushless DC Motors Under Static Rotor Eccentricity," IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1400-1409, March 2015.
    [2015]
  • [40] M. Ojaghi and M. Mohammadi, "Unified Modeling Technique for Axially Uniform and Nonuniform Eccentricity Faults in Three-Phase Squirrel Cage Induction Motors," IEEE Transactions on Industrial Electronics, vol. 65, no. 7, pp. 5292-5301, July 2018.
    [2018]
  • [3] X. Lin, W. Huang, W. Jiang, Y. Zhao and S. Zhu, "Deadbeat Direct Torque and Flux Control for Permanent Magnet Synchronous Motor Based on Stator Flux Oriented," IEEE Trans. Power Electron., vol. 35, no. 5, pp. 5078-5092, May 2020.
    [2020]
  • [39] J. Shin, Y. Park and S. B. Lee, "Flux-Based Detection and Classification of Induction Motor Eccentricity, Rotor Cage, and Load Defects," IEEE Transactions on Industry Applications, vol. 57, no. 3, pp. 2471-2480, May-June 2021.
  • [37] R. S. C. Pal and A. R. Mohanty, "A Simplified Dynamical Model of Mixed Eccentricity Fault in a Three-Phase Induction Motor," IEEE Transactions on Industrial Electronics, vol. 68, no. 5, pp. 4341-4350, May 2021.
    [2021]
  • [36] J. Im, J. Park and J. Hur, "Bearing Fault Detection Using Low-Frequency Total Components in phase current," 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 2019.
    [2019]
  • [35] J. -H. Im, W. -J. Kim and J. Hur, "Comparison of Frequency Responses of the Motors with Bearing Voltage Reduction Structures," 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020.
    [2020]
  • [34] A. Romanenko, A. Muetze and J. Ahola, "Incipient Bearing Damage Monitoring of 940- h Variable Speed Drive System Operation," IEEE Transactions on Energy Conversion, vol. 32, no. 1, pp. 99-110, March 2017.
    [2017]
  • [33] M. Turzynski and P. J. Chrzan, "Reducing Common-Mode Voltage and Bearing Currents in Quasi-Resonant DC-Link Inverter," IEEE Transactions on Power Electronics, vol. 35, no. 9, pp. 9553-9562, Sept. 2020.
    [2020]
  • [32] T. Plazenet, T. Boileau, C. Caironi and B. Nahid-Mobarakeh, "A Comprehensive Study on Shaft Voltages and Bearing Currents in Rotating Machines," IEEE Transactions on Industry Applications, vol. 54, no. 4, pp. 3749-3759, July-Aug. 2018.
    [2018]
  • [31] B. Bai, Y. Wang and X. Wang, "Suppression for Discharging Bearing Current in Variable-Frequency Motors Based on Electromagnetic Shielding Slot Wedge," IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.
    [2015]
  • [30] P. Han, G. Heins, D. Patterson, M. Thiele and D. M. Ionel, "Modeling of Bearing Voltage in Electric Machines Based on Electromagnetic FEA and Measured Bearing Capacitance," IEEE Transactions on Industry Applications, vol. 57, no. 5, pp. 4765-4775, Sept.-Oct. 2021.
  • [2] J. Lara, J. Xu and A. Chandra, "Effects of Rotor Position Error in the Performance of Field-Oriented-Controlled PMSM Drives for Electric Vehicle Traction Applications," IEEE Trans. Ind. Electron., vol. 63, no. 8, pp. 4738-4751, Aug. 2016.
    [2016]
  • [29] Z. Wang, Q. Zhang, J. Xiong, M. Xiao, G. Sun and J. He, "Fault Diagnosis of a Rolling Bearing Using Wavelet Packet Denoising and Random Forests," IEEE Sensors Journal, vol. 17, no. 17, pp. 5581-5588, 1 Sept.1, 2017.
    [2017]
  • [28] A. Romanenko, A. Muetze and J. Ahola, "Effects of Electrostatic Discharges on Bearing Grease Dielectric Strength and Composition," IEEE Transactions on Industry Applications, vol. 52, no. 6, pp. 4835-4842, Nov.-Dec. 2016.
    [2016]
  • [27] J. Park, T. R. Wellawatta, S. Choi and J. Hur, "Mitigation Method of the Shaft Voltage According to Parasitic Capacitance of the PMSM," IEEE Transactions on Industry Applications, vol. 53, no. 5, pp. 4441-4449, Sept.-Oct. 2017.
    [2017]
  • [26] R. K. Singleton, E. G. Strangas and S. Aviyente, "The Use of Bearing Currents and Vibrations in Lifetime Estimation of Bearings," IEEE Transactions on Industrial Informatics, vol. 13, no. 3, pp. 1301-1309, June 2017.
    [2017]
  • [25] A. Muetze and E. G. Strangas, "The Useful Life of Inverter-Based Drive Bearings: Methods and Research Directions from Localized Maintenace to Prognosis," IEEE Industry Applications Magazine, vol. 22, no. 4, pp. 63-73, July-Aug. 2016.
    [2016]
  • [24] P. Zhang, Y. Du, T. G. Habetler and B. Lu, "A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors," IEEE Transactions on Industry Applications, vol. 47, no. 1, pp. 34-46, Jan.-Feb. 2011.
    [2011]
  • [23] Z. Ullah, S. Lee and J. Hur, "A Torque Angle-Based Fault Detection and Identification Technique for IPMSM," IEEE Transactions on Industry Applications, vol. 56, no. 1, pp. 170- 182, Jan.-Feb. 2020.
    [2020]
  • [22] C. Jeong and J. Hur, "Optimization Design of PMSM With Hybrid-Type Permanent Magnet Considering Irreversible Demagnetization," IEEE Transactions on Magnetics, vol. 53, no. 11, pp. 1-4, Nov. 2017.
    [2017]
  • [21] C. Jeong and J. Hur, "A Novel Proposal to Improve Reliability of Spoke-Type BLDC Motor Using Ferrite Permanent Magnet," IEEE Transactions on Industry Applications, vol. 52, no. 5, pp. 3814-3821, Sept.-Oct. 2016.
    [2016]
  • [20] H. Kim and J. Hur, "Dynamic Characteristic Analysis of Irreversible Demagnetization in SPM- and IPM-Type BLDC Motors," IEEE Transactions on Industry Applications, vol. 53, no. 2, pp. 982-990, March-April 2017.
    [2017]
  • [19] H. Kim and J. Hur, "Dynamic Characteristic Analysis of Irreversible Demagnetization in SPM- and IPM-Type BLDC Motors," IEEE Transactions on Industry Applications, vol. 53, no. 2, pp. 982-990, March-April 2017.
    [2017]
  • [18] Y. Lee, K. Kim and J. Hur, "Finite-Element Analysis of the Demagnetization of IPMType BLDC Motor With Stator Turn Fault," IEEE Transactions on Magnetics, vol. 50, no. 2, pp. 889-892, Feb. 2014.
    [2014]
  • [17] H. Kim, J. Park and J. Hur, "Comparison Analysis of Demagnetization and Torque Ripple in Accordance With Freewheeling Current in PM BLDC Motor," IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.
    [2015]
  • [16] H. Kim and J. Hur, "Magnetic Field Analysis of Irreversible Demagnetization in Brushless DC Motor According to the Dynamic and Static Characteristic," IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.
    [2015]
  • [15] H. Kim, J. Park and J. Hur, "Comparison Analysis of Demagnetization and Torque Ripple in Accordance With Freewheeling Current in PM BLDC Motor," IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.
    [2015]
  • [14] S. Lee and J. Hur, "Detection Technique for Stator Inter-Turn Faults in BLDC Motors Based on Third-Harmonic Components of Line Currents," IEEE Transactions on Industry Applications, vol. 53, no. 1, pp. 143-150, Jan.-Feb. 2017.
    [2017]
  • [13] S. Lee and J. Hur, "Simplified Equivalent Model of PMSM With Inter-Turn Fault," IEEE Transactions on Industry Applications, vol. 55, no. 3, pp. 2629-2636, May-June 2019.
    [2019]
  • [12] J. Park, C. Jeong, S. Lee and J. Hur, "Early Detection Technique for Stator Winding Inter-Turn Fault in BLDC Motor Using Input Impedance," IEEE Transactions on Industry Applications, vol. 51, no. 1, pp. 240-247, Jan.-Feb. 2015.
    [2015]
  • [11] K. Kim, Y. Lee and J. Hur, "Transient Analysis of Irreversible Demagnetization of Permanent-Magnet Brushless DC Motor With Interturn Fault Under the Operating State," IEEE Transactions on Industry Applications, vol. 50, no. 5, pp. 3357-3364, Sept.-Oct. 2014.
    [2014]
  • [10] J. Zhang, W. Zhan and M. Ehsani, "Fault-Tolerant Control of PMSM With Inter-Turn Short-Circuit Fault," IEEE Transactions on Energy Conversion, vol. 34, no. 4, pp. 2267-2275, Dec. 2019.
    [2019]