연구동향 분석

저전압 인버터의 MOSFET 접합 온도 추정을 통한 전류 검출 기법 연구

하주형 2020년

논문상세정보
    • 저자 하주형
    • 기타서명 (A)study of current sensing method through MOSFET junction temperature estimation at low voltage inverter
    • 형태사항 26 cm: x, 113 p.: 삽화(주로천연색), 도표
    • 일반주기 지도교수: 이근호, 참고문헌: p. 105-110
    • 학위논문사항 국민대학교 자동차공학전문대학원, 2020. 8, 학위논문(박사)-, 자동차공학전공
    • DDC 23, 629.2293
    • 발행지 서울
    • 언어 kor
    • 출판년 2020
    • 발행사항 국민대학교 자동차공학전문대학원
    • 주제어 MOS-FET 인버터
    유사주제 논문( 102)
인용/피인용
' 저전압 인버터의 MOSFET 접합 온도 추정을 통한 전류 검출 기법 연구' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 공학의 다른 갈래
  • mos-fet
  • 인버터
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
105 0

0.0%

' 저전압 인버터의 MOSFET 접합 온도 추정을 통한 전류 검출 기법 연구' 의 참고문헌

  • 전기자동차용 주요 부품의 시장동향 및 전망(2012 ~2020).
    sne research. last modified 2016년 8월 9일, accessed 2020년 6월 2일, http://www.sneresearch.com/_new/html/sub/sub1/sub1_01_view.php?mode=show& id=933&sub_cat=
  • 실리콘 카바이드 모스펫의 근사모델에 의한 스위칭 과도 현상 분석 및 전력 변환 응용,
    김재석 (박사학위, 서울대학교 [2018]
  • 반도체 공학 :그림으로 보여주는 반도체의 핵심 원리
    김동명 서 울: 한빛아카데미 [2011]
  • “3상 펄스폭 변조 인버터의 최적 설계를 위한 IGBT 접합 온도 추정 기법,”
    이한상 (박사학위, 국민대학교 [2020]
  • “3상 인버터의 션트저항을 이용한 고성능 전류검출 기 법에 관한 연구,”
    방지원 (석사학위, 국민대학교 [2018]
  • “3상 인버터의 DC단 션트 및 FET 전압강하를 이용한 전 류검출 기법 연구,”
    임현재 (석사학위, 국민대학교 [2019]
  • dynamic electrothermal model of silicon carbide power IGBT devices
    pp . 201_206 . [2013]
  • [5] “AN-9010 MOSFET Basics,” ON Semiconductor Application Note Rev. 1.0.5 (2013).
  • [56] Recommendations for Board Assembly of Infineon Discrete Packages without Leads, Infineon Application Note Reversion 6.0, (2018).
  • [55] Rohit T.Nayak, Toufique Ahmed, Arvind Krishna, Ken Hollis,” Effect of Post-Mold Curing of Epoxy Molding Compound on Wirebond Reliability in a MOSFET,” 2007 8th International Conference on Electronic Packaging Technology, (2007).
  • [54] PCBThermal Design Guide for GaN Enhancement Mode Power Transistors Application Note Rev 150318, GaN Systems Inc, (2015).
  • [37] M. Alnajjar and D. Gerling, ``Electrothermal model of IGBT threelevel neutral-point-clamped recti_er for synchronous reluctance generator in wind power application,'' in Proc. Int. Conf. Renew. Energy Res. Appl. (ICRERA), 2015, pp. 167_172.
  • [31] R. Azar et al., ``Advanced electrothermal Spice modelling of large power IGBTs,'' IEE Proc.-Circuits, Devices Syst., vol. 151, no. 3, pp. 249_253, Jun. 2004.
  • [30] S. Carubelli and Z. Khatir, ``Experimental validation of a thermal modelling method dedicated to multichip power modules in operating conditions,'' Microelectron. J., vol. 34, no. 12, pp. 1143_1151, Dec. 2003.
  • [26] P. Türkes and J. Sigg, ``Electro-thermal simulation of power electronic systems,'' Microelectron. J., vol. 29, no. 11, pp. 785-790, 1998.
  • [22] V. d'Alessandro et al., ``Analysis of the UIS behavior of power devices by means of SPICE-based electrothermal simulations,'' Microelectron. Rel., vol. 53, pp. 1713-1718, Sep. 2013.
  • [21] M. Riccio et al., ``3D electro-thermal simulations of wide area power devices operating in avalanche condition,'' Microelectron. Rel., vol. 52, pp. 23852390, Oct. 2012.
  • [20] A. Sarkar and B. Issac, ``Geometry optimization of thermal interface material with the help of heat propagation speed subjected to a pulsed heat source,'' Int. J. Thermal Sci., vol. 117, pp. 100-107, Jan. 2017.
  • [18] M. Musallam and C. M. Johnson, ``Real-time compact thermal models for health management of power electronics,'' IEEE Trans. Power Electron., vol. 25, no. 6, pp. 1416-1425, Jun. 2010.
  • Transient thermal analysis of power devices based on Fourier-series thermal model
    pp . 3129-3135 .
  • Transient electrothermal simulation of power semiconductor devices
    vol . 25 , no . 1 , pp . 237-248 ,
  • Transient Analysis of MOS Transistors
    Vol . SC-15 , No . 4 [1980]
  • Top-metal ageing effects on electro-thermal distributions in an IGBTChip under shortCircuitConditions
    pp . 1_9 .
  • ThermalComponent models for electro thermal analysis of multichip power modules
    vol . 1 . [2002]
  • ThermalComponent model for electrothermal analysis of IGBT module systems ,
    vol . 24 , no . 3 , pp . 401_406 ,
  • Thermal management on IGBT power electronic devices and modules
    pp . 12868- 12884 . [2018]
  • Thermal effects and junction temperature evaluation of Power MOSFETs
    [2015]
  • Thermal Modeling of Power-electronic Systems
    Fraunhofer [2000]
  • The Power MOSFET Application Handbook Design Engineer ’ s Guide
  • Switching loss Estimation of High Voltage Power MOSFET in Power Factor Correction Pre-regulator
  • Power MOSFET Tutorial
    [2006]
  • Power MOSFET Basics : Understanding GateCharge and Using it to Assess Switching Performance
    [2016]
  • Power MOSFET Basics
  • Physical Background of MOS Model 11 Level 1101
    [2003]
  • Numerical simulation of copper heat spreader used in Electronics chip cooling
    [2016]
  • Modeling and Simulation of Insulated-Gate Field-Effect Transistor Switching Circuits ,
    VOL . sc3 , no . 3 [1968]
  • Measurement of the transient junction temperature in MOSFET devices under operating conditions
    [2007]
  • Measurement and Characterisation Technique for Real-Time Die Temperature Prediction of MOSFET-Based Power Electronics
    [2015]
  • MOSFET Power Losses Calculation Using the Data-Sheet Parameters
    V 1.1 ( [2006]
  • Layered electro-thermal model of high-end integrated power electronics modules with IGBTs
    pp . 1575-1580 .
  • Improved Method for MOSFET Voltage Rise-time and Fall-time Estimation in Inverter Switching Loss Calculation
    [2015]
  • High Frequency Power Switch – Improved Performance by MOSFETs and IGBTs Connected in Parallel
    [2005]
  • Fast and accurate IcepakPSpiceCo-simulation of IGBTs under short-circuit with an advanced PSpice model
    pp . 1-5 . [2014]
  • Error-Free Matthiessen 's Rule in the MOSFET Universal Mobility Region ,
    vol . 60 , no . 2 , pp . 753-758 , Feb. 2013 , doi : 10.1109/TED.2012.2233202 .
  • EnergyCapacity of Voltage DependaentCapacitor for theCalculation of MOSFET ’ s Switching Losses
  • Energy Capacity of Voltage Dependaent Capacitor for the Calculation of MOSFET ’ s Switching Losses
    [2012]
  • Electro-thermal modeling of SiC power devices forCircuit simulation
    pp . 718_723 .
  • Effects of Package Type , Die Size , Material and Interconnection on the Junction-to-Case Thermal Resistance of Power MOSFET Packages
    [2011]
  • Dynamic electrothermal physically basedCompact models of the power devices for device andCircuit simulations
    pp . 35_42 .
  • Basic Knowledge of Discrete Semiconductor Device
    [2018]
  • Application thermal research of forcedairCooling system in high-power NPC three-level inverter based on power module block ,Case Stud
    vol . 8 , pp . 387-397 ,
  • Anovel electro-thermal simulation approach of power IGBT modules for automotive traction applications ,
    pp . 289_292 . [2004]
  • Analysis of the switching process of power MOSFETs using a new analytical losses model
    [2009]
  • Analysis of emperature Effect on MOSFET Parameter using MATLAB
    Volume 4 , Issue 3 [2016]
  • An effective heat propagation pathbased online adaptive thermal model for IGBT modules ,
    pp . 513_518 .
  • APARAMETRIC STUDY OF POWER MOSFETS
    [1979]
  • A TemperatureDependent Thermal Model of IGBT Modules Suitable for Circuit-Level Simulations ,
    [2014]
  • 3-D thermalComponent model for electrothermal analysis of multichip power modules with experimental validation
    vol . 30 , no . 6 , pp . 3300-3308 ,