연구동향 분석
박사

유도 전동기 고정자 코어와 회전자 고장 진단의 신뢰성 향상을 위한 전기적 진단 방법

양찬승 2019년

논문상세정보
인용/피인용
' 유도 전동기 고정자 코어와 회전자 고장 진단의 신뢰성 향상을 위한 전기적 진단 방법' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 감시
  • 설비
  • 전기적 진단
  • 전동기
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
115 0

0.0%

' 유도 전동기 고정자 코어와 회전자 고장 진단의 신뢰성 향상을 위한 전기적 진단 방법' 의 참고문헌

  • “삼상유도기 적용범위확대 효율기준 최종보고서”
  • “2017년도 전력설비 정지통계”
    김정인 변성현 전력거래소, [2018]
  • http://inpower.co.kr/chtml/board.php?com_board_basic=read_form_contents&com_ board_id=12&com_board_idx=35
  • World Energy Balances, (2017 ed.), IEA, Paris.
  • Washington State Energy Office, Keeping the spark in your electrical system: an industrial electrical maintenance guidebook, Oct. 1995.
  • W.T. Thomson, “On-line current monitoring – the influence of mechanical loads or a unique rotor design on the diagnosis of broken rotor bars in induction motors,” Proc. of ICEM, pp. 1236-1240, 1992.
  • W. Thomson, “Recent (2005–2006) case histories on the application of motor current signature analysis to detect broken rotor bars,” in Proc. IRMC, Toronto, ON, Canada, 2006.
  • U.S. Department of Energy, "Energy tips - motor systems," Motor systems tip sheet #8, Sept. 2005.
  • Tom Bishop, “Motors: The Proactive Approach to Voltage Unbalance”, June 2016.
  • The effect of repair/ rewinding on motor efficiency: EASA/AEMT rewind study and good practice guide to maintain motor efficiency, EASA/AEMT, 2003.
  • Testing of Squirrel Cage Rotors, EASA AR100-2010, Oct. 2010.
  • T.J. Sobbczyk, et. al., "Influence of pole-pair number and rotor slot number on effects caused by cage faults," Proc. of IEEE SDEMPED, pp. 199-204, 2011.
  • T. J. Sobczyk and W. Maciolek, “Diagnostics of rotor-cage faults sup- ported by effects due to higher MMF harmonics,” in Proc. IEEE Power Tech Conf., Jun. 2003, vol. 2, pp. 1–5.
  • T. A. Lipo, Introduction to AC Machine Design. Madison, WI, USA: Wisconsin Power Electron. Res. Center, Uiv,Wisconsin, 2004.
  • S.H. Lee, et. al., “Evaluation of the Influence of Rotor Axial Air Duct Design on Condition Monitoring of Induction Motors,” Proc. of IEEE ECCE, pp. 3016-3023, Sept. 2012.
  • S. Williamson, et. al., “"Steady state analysis of double cage induction motors with rotor cage faults,”" Proc. Inst. Elect. Eng.—-Elect. Power Appl., vol. 134, no. 4, pp. 199– 206, Jul. 1987.
  • S. Lee, J. Hong, S. B. Lee, E. J. Wiedenbrug, M. Teska, and H. Kim, “Evaluation of the influence of rotor axial air ducts on condition monitoring of induction motors,” IEEE Trans. Ind. Appl., vol. 49, no. 5, pp. 2024–2033, 2013.
  • S. B. Lee, G. B. Kliman, M. R. Shah, N. K. Nair, and R. M. Lusted, “An iron core probe based inter-laminar core fault detection technique for generator stator cores,” IEEE Trans. Energy Convers., vol. 20, no. 2, pp. 344–351, 2005.
  • S. B. Lee et al., “Identification of false rotor fault indications produced by online MCSA for medium-voltage induction machines,” IEEE Trans. Ind. Appl., vol. 52, no. 1, pp. 729–739, 2016.
  • S. B. Lee et al., “Experimental study of inter-laminar core fault detection techniques based on low flux core excitation,” IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 85–94, 2006.
  • R.R. Schoen, et. al., "Effects of Time-Varying Loads on Rotor Fault Detection in Induction Machines" IEEE Trans. on Ind. Appl., vol. 31, no. 4, pp. 900-906, July/Aug. 1995.
  • R. M. Tallam, T. G. Habetler, and R. G. Harley, "Transient model for induction machines with stator winding turn faults," IEEE Transactions on Industry Applications, vol. 38, pp. 632-637, 2002.
  • R. M. Tallam et al., “A survey of methods for detection of stator-related faults in induction machines,” IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 920–933, 2007.
  • Paul Waide and Conrad U. Brunner, “Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems,” International Energy Agency, 2011.
  • P.F. Albrecht, J.C. Appiarius and D.K. Sharma, "Assessment of reliability of motors in utility applications updated," IEEE Transactions on Energy Conversion, vol. 1, no. 1, pp. 39-46, 1986.
  • P. O'Donnell, "Report of large motor reliability survey of industrial and commercial installations: Part I and II," IEEE Transactions on Industry Applications, vol. 21, no. 4, pp. 853-872, 1985.
  • P. M. de la Barrera, G. R. Bossio, J. A. Solsona, and G. O. Garcı́a, “Model for threephase induction motors with stator core faults,” IET Electr. Power Appl., vol. 4, no. 8, p. 591, 2010.
  • P. M. De La Barrera, G. R. Bossio, and R. Leidhold, “Online Voltage Sensorless High- Resistance Connection Diagnosis in Induction Motor Drives,” IEEE Trans. Ind. Electron., vol. 62, no. 7, pp. 4374–4384, 2015.
  • P. M. De La Barrera, G. R. Bossio, and J. A. Solsona, “High-resistance connection detection in induction motor drives using signal injection,” IEEE Trans. Ind. Electron., vol. 61, no. 7, pp. 3563–3573, 2014.
  • P. Christensen, “Stator core testing,” Elect. Apparatus Service Assoc., Inc., St. Louis, MO, EASA Tech. Note 17, 2002
  • N.Kim, “Energy Statistics Handbook”, Korea Energy Agency, 2017.
  • M. Riera-Guasp, J. Pons-Llinares, F. Vedreno-Santos, J. A. Antonino- Daviu, and M. Fernandez Cabanas, “Evaluation of the amplitudes of high-order fault related components in double bar faults,” in Proc. IEEE Int. Symp. Diagnost. Elect. Mach., Power. Electron. Drives, Sep. 2011, pp. 307–315.
  • M. Drif, and AJ.M. Cardoso, "Discriminating the simultaneous occurrence of threephase induction motor rotor faults and mechanical load oscillations by the instantaneous active and reactive power media signature analyses," IEEE Trans. on Ind. Elec., vol. 59, no. 3, pp.1630-1639, March 2012.
  • M. Braunovic, N. Myshkin, and V. Konchits, Electrical Contacts: Funda- mentals, Applications and Technology. New York, NY, USA: Taylor & Francis, 2006.
  • M. Baranski and A. Polak, “Thermal diagnostic in electrical machines,” PRZEGLAD ELEKTROTECHNICZNY (Elect. Rev.), vol. 10, pp. 305–308, Oct. 2011.
  • K. Lee, J. Hong, K. W. Lee, S. B. Lee, and E. J. Wiedenbrug, “A stator-core qualityassessment technique for inverter-fed induction machines,” IEEE Trans. Ind. Appl., vol. 46, no. 1, pp. 213–221, 2010.
  • J. Yun, K. Lee, K. W. Lee, S. B. Lee, and J. Y. Yoo, “Detection and classification of stator turn faults and high-resistance electrical connections for induction machines,” IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 666–675, 2009.
  • J. Yun, J. Cho, Sang Bin Lee, and J. Y. Yoo, “Online detection of high-resistance connections in the incoming electrical circuit for induction motors,” IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 694–702, 2009.
  • J. Sutton, “El-CID-An easier way to test stator cores,” Elect. Rev., vol. 207, pp. 33–37, Jul. 1980.
  • J. Sletbak, R. Kristensen, H. Sundklakk, G. N vik, and M. Runde, “Glowing Contact Areas in Loose Copper Wire Connections,” IEEE Trans. Components, Hybrids, Manuf. Technol., vol. 15, no. 3, pp. 322–327, 1992.
  • J. Park, et. al., "Evaluation of the detectability of broken rotor bars for double squirrel cage rotor induction motors," Proc. of IEEE ECCE, pp. 2493–2500, Sept. 2010.
  • J. J. Shea, “Conditions for series arcing phenomena in PVC wiring,” IEEE Trans. Components Packag. Technol., vol. 30, no. 3, pp. 532–539, 2007.
  • J. Antonino-Daviu, J. Pons-Llinares, M. Riera-Guasp, J. Park, S.B. Lee, J. Yoo, and C. Kral, “Detection of broken outer cage bars for double cage induction motors under the startup transient,” IEEE Trans. on Ind. Appl., vol. 48, no. 5, pp. 1539-1548, Sept./Oct. 2012.
  • IoT Analytics Research, “Total Market”, Predictive Maintenance Market Report 2017- 2022.
  • IoT Analytics Research, “Company Profiles”, Predictive Maintenance Market Report 2017-2022.
  • IEEE standard test procedure for polyphaser induction motors and generators, IEEE Standard 112-2004, Nov. 2004.
  • IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus- Electric Machinery, IEEE Standard 62.2-2004, Jun. 2005.
  • I. M. Culbert and W. Rhodes, “Using current signature analysis tech- nology to reliably detect cage winding defects in squirrel-cage induc- tion motors,” IEEE Trans. Ind. Appl., vol. 43, no. 2, pp. 422–428, Mar./Apr.
  • H. Henao, H. Razik, and G. A. Capolino, “Analytical approach of the stator current frequency harmonics computation for detection of induction machine rotor faults,” IEEE Trans. Ind. Appl., vol. 41, no. 3, pp. 801–807, May/Jun. 2005.
  • H. A. Toliyat and G. B. Kliman, Handbook of Electric Motors, 2nd ed. New York: Marcel Dekker, 2004.
  • Greg C. Stone; Ian Culbert, Edward A. Boulter, Hussein Dhirani, "Core Testing," in Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair , 1, Wiley-IEEE Press, 2014, pp.672-
  • G.R. Bossio, "Separating broken rotor bars and load oscillations on IM fault diagnosis through the instantaneous active and reactive currents," IEEE Trans. on Ind. Elec., vol. 56, no. 11, pp. 4571-4580, Nov. 2009.
  • G.C. Stone, E.A.Boulter, I.Culbert, and H. Dhirani, “Electrical Insulation for Rotating Machines,” New York:Wiley, 2004, ser. IEEE Press Series on Power Engineering.
  • G. Grandi, M. K. Kazimierczuk, A. Massarini, U. Reggiani, and G. Sancineto, “Model of laminated iron-core inductors for high frequencies,” IEEE Trans. Magn., vol. 40, no. 4 I, pp. 1839–1845, 2004.
  • G. B. Kliman, S. B. Lee, M. R. Shah, R. M. Lusted, and N. K. Nair, “A new method for synchronous generator core quality evaluation,” IEEE Trans. Energy Convers., vol. 19, no. 3, pp. 576–582, 2004.
  • F. Filippetti, G. Franceschini, C. Tassoni, A. Ometto, and S. Meo, “A simplified model of induction machine with stator shorted turns oriented to diagnostics,” in Proc. ICEM’96, vol. 3, 1996, pp. 410–413.
  • F. Brailsford, Physical Principles of Magnetism. New York: VanNostrand, 1966.
  • Evaluation of the Influence of Rotor Magnetic Anisotropy on Condition Monitoring of Two-Pole Induction Motors
  • D. R. Bertenshaw, J. F. Lau, and D. J. Conley, “Evaluation of EL CID indications not associated with stator core interlaminar insulation faults,” 2011 Electr. Insul. Conf. EIC 2011, no. June, pp. 254–260, 2011.
  • C. Kral, et. al., "Phenomenon rotor fault—multiple electrical rotor asymmetries in induction machines," IEEE Trans. on Pwr. Elec., vol. 25 , no. 5, pp. 1124-1134, May 2010.
  • C. H. De Angelo, G. R. Bossio, J. M. Bossio, and G. O. Garcia, “Broken bar detection in single-phase reciprocating compressors,” in Proc. IEEE Ind. Electron. Conf., Nov. 2008, pp. 1125–1130.
  • C. A. Schulz, S. Duchesne, D. Roger, and J.-N. Vincent, "Capacitive short circuit detection in transformer core laminations," Journal of Magnetism and Magnetic Materials, vol. 320, pp. e911-e914, 2008.
  • Bonneville Power Administration, “Electrical distribution system tune-up”, Jan. 1995.
  • B.D. Evans, “Induction motor case histories: a focus on electrically related phenomena,” Proc. of Vibration Institute Annual Meeting, 2009.
  • B. D. Evans, “Induction motor case histories: A focus on electrically related phenomena,” in Proc. Vib. Inst. Annu. Meet.,Harrisburg, PA, USA, 2009.
  • B. Akin, U. Orguner, H. A. Toliyat, and M. Rayner, “Low order PWM inverter harmonics contributions to the inverter-fed induction machine fault diagnosis,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 610–619, Feb. 2008.
  • A. Bellini, et al., “On-field experience with on-line diagnosis of large induction motors cage failures using MCSA,” IEEE Trans. on Ind. Appl., pp. 1045-1053, vol. 38, no. 4, July/Aug. 2002.