연구동향 분석
박사

Localized cryogenic cooling for optimal cutting heat removal in Ti alloy machining

강명구 2019년

논문상세정보
인용/피인용
' Localized cryogenic cooling for optimal cutting heat removal in Ti alloy machining' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • Cutting force
  • Cutting temperature
  • Microstructural alteration
  • Surface roughness
  • cryogenicmachining
  • liquidnitrogen
  • ti-6al-4v
  • tool life
  • 공구 간접 냉각
  • 공구마모
  • 극저온 가공
  • 미세구조
  • 액체질소
  • 잔류응력
  • 절삭력
  • 절삭온도
  • 표면 거칠기
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
545 0

0.0%

' Localized cryogenic cooling for optimal cutting heat removal in Ti alloy machining' 의 참고문헌

  • Z. Zhao and S. Hong, "Cooling strategies for cryogenic machining from a materials viewpoint," Journal of materials engineering and performance, vol. 1, pp. 669-678, 1992.
  • Z. Wang, K. Rajurkar, J. Fan, S. Lei, Y. Shin, and G. Petrescu, "Hybrid machining of Inconel 718," International Journal of Machine Tools and Manufacture, vol. 43, pp. 1391-1396, 2003.
  • Z. Wang and K. Rajurkar, "Cryogenic machining of hard-to-cut materials," Wear, vol. 239, pp. 168-175, 2000.
  • Z. Wan, Y. Zhu, H. Liu, and Y. Tang, "Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V," Materials Science and Engineering: A, vol. 531, pp. 155-163, 2012.
  • Y. Yildiz and M. Nalbant, "A review of cryogenic cooling in machining processes," International Journal of Machine Tools and Manufacture, vol. 48, pp. 947-964, 2008.
  • Y. Shashidhara and S. Jayaram, "Vegetable oils as a potential cutting fluid—an evolution," Tribology International, vol. 43, pp. 1073-1081, 2010.
  • Y. Kaynak, S. Robertson, H. Karaca, and I. Jawahir, "Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions," Journal of Materials Processing Technology, vol. 215, pp. 95-104, 2015.
  • Y. Honnorat, "Issues and breakthrough in the manufacture of turboengine titanium parts," Materials Science and Engineering: A, vol. 213, pp. 115-123, 1996.
  • Y. A. Cengel, Introduction to thermodynamics and heat transfer: McGraw-Hill New York, 1997.
  • W. Grzesik, K. Żak, M. Prażmowski, B. Storch, and T. Pałka, "Effects of cryogenic cooling on surface layer characteristics produced by hard turning," Archives of Materials Science, vol. 6, p. 6, 2012.
  • W. F. Hosford, Mechanical behavior of materials vol. 9780521846707. Cambridge;New York;: Cambridge University Press, 2005.
  • W. D. Callister and D. G. Rethwisch, Materials science and engineering: an introduction: Wiley New York, 1991.
  • V. Chandravanshi, K. Prasad, V. Singh, A. Bhattacharjee, and V. Kumar, "Effects of α+ β phase deformation on microstructure, fatigue and dwell fatigue behavior of a near alpha titanium alloy," International Journal of Fatigue, vol. 91, pp. 100-109, 2016.
  • THIRD WAVE SYSTEMS AdvantEdgeTM. Available: https://www.thirdwavesys.com/advantedge/
  • T. Seshacharyulu, S. Medeiros, W. Frazier, and Y. Prasad, "Microstructural mechanisms during hot working of commercial grade Ti–6Al–4V with lamellar starting structure," Materials Science and Engineering: A, vol. 325, pp. 112-125, 2002.
  • T. Obikawa, K. Funai, and Y. Kamata, "Air jet assisted machining of titanium alloy," Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 5, pp. 139-149, 2011.
  • T. Feyzi and S. M. Safavi, "Improving machinability of Inconel 718 with a new hybrid machining technique," The International Journal of Advanced Manufacturing Technology, vol. 66, pp. 1025-1030, 2013.
  • T. Ahmed and H. Rack, "Phase transformations during cooling in α+ β titanium alloys," Materials Science and Engineering: A, vol. 243, pp. 206-211, 1998.
  • SANDVIK∙Coromant. Innovative aerospace solutions: Titanium machining. Available: https://www.sandvik.coromant.com/engb/ industrysolutions/aerospace/titanium/pages/default.aspx
  • SANDVIK_COROMANT. PCLNL 2525M 12HP Available: https://www.sandvik.coromant.com/enus/ products/pages/productdetails.aspx?c=pclnl%202525m%2012hp
  • S.-C. Liao and J. Duffy, "Adiabatic shear bands in a Ti-6Al-4V titanium alloy," Journal of the Mechanics and Physics of Solids, vol. 46, pp. 2201-2231, 1998.
  • S. Yuan, L. Yan, W. Liu, and Q. Liu, "Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy," Journal of Materials Processing Technology, vol. 211, pp. 356-362, 2011.
  • S. Y. Hong, Y. Ding, and W.-c. Jeong, "Friction and cutting forces in cryogenic machining of Ti–6Al–4V," International Journal of Machine Tools and Manufacture, vol. 41, pp. 2271-2285, 2001.
  • S. Y. Hong, "Economical and ecological cryogenic machining," TRANSACTIONSAMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING, vol. 123, pp. 331-338, 2001.
  • S. Y. Hong and Y. Ding, "Micro-temperature manipulation in cryogenic machining of low carbon steel," Journal of Materials Processing Technology, vol. 116, pp. 22-30, 2001.
  • S. Y. Hong and Y. Ding, "Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V," International Journal of Machine Tools and Manufacture, vol. 41, pp. 1417-1437, 2001.
  • S. Tirelli, E. Chiappini, M. Strano, M. Monno, and Q. Semeraro, "Experimental comparison between traditional and cryogenic cooling conditions in rough turning of Ti-6Al-4V," in Key Engineering Materials, 2014, pp. 1174-1185.
  • S. Sun, M. Brandt, and M. Dargusch, "Thermally enhanced machining of hard-tomachine materials—a review," International Journal of Machine Tools and Manufacture, vol. 50, pp. 663-680, 2010.
  • S. Sun, M. Brandt, S. Palanisamy, and M. S. Dargusch, "Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti–6Al–4V alloy," Journal of Materials Processing Technology, vol. 221, pp. 243-254, 2015.
  • S. Ravi and M. P. Kumar, "Experimental investigations on cryogenic cooling by liquid nitrogen in the end milling of hardened steel," Cryogenics, vol. 51, pp. 509-515, 2011.
  • S. Patil, S. Joshi, A. Tewari, and S. S. Joshi, "Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V," Ultrasonics, vol. 54, pp. 694-705, 2014.
  • S. Patil, S. Jadhav, S. Kekade, A. Supare, A. Powar, and R. Singh, "The Influence of Cutting Heat on the Surface Integrity during Machining of Titanium Alloy Ti6Al4V," Procedia Manufacturing, vol. 5, pp. 857-869, 2016.
  • S. Lawal, I. Choudhury, and Y. Nukman, "Application of vegetable oil-based metalworking fluids in machining ferrous metals—a review," International Journal of Machine Tools and Manufacture, vol. 52, pp. 1-12, 2012.
  • S. Joshi, P. Pawar, A. Tewari, and S. S. Joshi, "Influence of β phase fraction on deformation of grains in and around shear bands in machining of titanium alloys," Materials Science and Engineering: A, vol. 618, pp. 71-85, 2014.
  • S. Joshi, P. Pawar, A. Tewari, and S. S. Joshi, "Effect of β phase fraction in titanium alloys on chip segmentation in their orthogonal machining," CIRP journal of manufacturing science and technology, vol. 7, pp. 191-201, 2014.
  • S. Hong and Y. Ding, "Manipulating machining temperature for chip breaking improvement," in ASME, International Symposium on Information Storage and Processing Systems, Atlanta, 1996, pp. 395-402.
  • S. Bair, J. Jarzynski, and W. O. Winer, "The temperature, pressure and time dependence of lubricant viscosity," Tribology International, vol. 34, pp. 461-468, 2001.
  • R. S. Revuru, N. R. Posinasetti, V. R. VSN, and M. Amrita, "Application of cutting fluids in machining of titanium alloys—a review," The International Journal of Advanced Manufacturing Technology, vol. 91, pp. 2477-2498, 2017.
  • R. M'Saoubi, D. Axinte, S. L. Soo, C. Nobel, H. Attia, G. Kappmeyer, et al., "High performance cutting of advanced aerospace alloys and composite materials," CIRP Annals, vol. 64, pp. 557-580, 2015.
  • R. G. Bayer and P. J. Blau, Wear of Materials: Elsevier, 2003.
  • R. Filip, K. Kubiak, W. Ziaja, and J. Sieniawski, "The effect of microstructure on the mechanical properties of two-phase titanium alloys," Journal of Materials Processing Technology, vol. 133, pp. 84-89, 2003.
  • R. Ding, Z. Guo, and A. Wilson, "Microstructural evolution of a Ti–6Al–4V alloy during thermomechanical processing," Materials Science and Engineering: A, vol. 327, pp. 233-245, 2002.
  • R. Ding and Z. Guo, "Microstructural evolution of a Ti–6Al–4V alloy during β- phase processing: experimental and simulative investigations," Materials Science and Engineering: A, vol. 365, pp. 172-179, 2004.
  • R. B. da Silva, . R. Machado, E. O. Ezugwu, J. Bonney, and W. F. Sales, "Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures," Journal of Materials Processing Technology, vol. 213, pp. 1459-1464, 2013.
  • Q. Quingwen, W. Mei, W. Lihua, and C. Shan, "A continuous viscosity model for thin film lubrication," Tribology international, vol. 35, pp. 459-465, 2002.
  • P.-J. Arrazola, A. Garay, L.-M. Iriarte, M. Armendia, S. Marya, and F. Le Maitre, "Machinability of titanium alloys (Ti6Al4V and Ti555. 3)," Journal of materials processing technology, vol. 209, pp. 2223-2230, 2009.
  • P. C. Priarone, F. Klocke, M. G. Faga, D. Lung, and L. Settineri, "Tool life and surface integrity when turning titanium aluminides with PCD tools under conventional wet cutting and cryogenic cooling," The International Journal of Advanced Manufacturing Technology, vol. 85, pp. 807-816, 2016.
  • N. Poondla, T. S. Srivatsan, A. Patnaik, and M. Petraroli, "A study of the microstructure and hardness of two titanium alloys: Commercially pure and Ti– 6Al–4V," Journal of Alloys and Compounds, vol. 486, pp. 162-167, 2009.
  • N. Kotkunde, A. D. Deole, A. K. Gupta, and S. K. Singh, "Comparative study of constitutive modeling for Ti–6Al–4V alloy at low strain rates and elevated temperatures," Materials & Design, vol. 55, pp. 999-1005, 2014.
  • N. Dhar, M. Kamruzzaman, and M. Ahmed, "Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel," Journal of materials processing technology, vol. 172, pp. 299-304, 2006.
  • N. Abukhshim, P. Mativenga, and M. A. Sheikh, "Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining," International Journal of Machine Tools and Manufacture, vol. 46, pp. 782-800, 2006.
  • M. P. Groover, Fundamentals of modern manufacturing: materials processes, and systems: John Wiley & Sons, 2007.
  • M. Motyka, K. Kubiak, J. Sieniawski, and W. Ziaja, "Hot Plasticity of Alpha Beta Alloys," in Titanium Alloys-Towards Achieving Enhanced Properties for Diversified Applications, ed: InTech, 2012.
  • M. J. Donachie, Titanium: a technical guide: ASM international, 2000.
  • M. J. Bermingham, J. Kirsch, S. Sun, S. Palanisamy, and M. S. Dargusch, "New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V," International Journal of Machine Tools and Manufacture, vol. 51, pp. 500-511, 2011.
  • M. I. Ahmed, A. F. Ismail, Y. Abakr, and A. N. Amin, "Effectiveness of cryogenic machining with modified tool holder," Journal of materials processing technology, vol. 185, pp. 91-96, 2007.
  • M. Donachie Jr, "Introduction to titanium and titanium alloys," American Society for Metals, Titanium and Titanium Alloys Source Book, p. 7, 1982.
  • M. Dhananchezian and M. P. Kumar, "Cryogenic turning of the Ti–6Al–4V alloy with modified cutting tool inserts," Cryogenics, vol. 51, pp. 34-40, 2011.
  • M. Biddulph and R. Burford, "Thermal properties and heat transfer coefficients in cryogenic cooling," Cryogenics, vol. 22, pp. 283-286, 1982.
  • M. Bermingham, S. Palanisamy, D. Kent, and M. Dargusch, "A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti–6Al–4V cutting," Journal of Materials Processing Technology, vol. 212, pp. 752-765, 2012.
  • M. Bermingham, J. Kirsch, S. Sun, S. Palanisamy, and M. Dargusch, "New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V," International Journal of Machine Tools and Manufacture, vol. 51, pp. 500-511, 2011.
  • L. M. Gammon, R. D. Briggs, J. M. Packard, K. W. Batson, R. Boyer, and C. W. Domby, "Metallography and microstructures of titanium and its alloys," Materials Park, OH: ASM International, 2004., pp. 899-917, 2004.
  • KENNAMETAL. Aerospace Industry Solutions: Machining Titanium. Available: https://www.kennametal.com/en/industry-solutions/aerospace/machiningtitanium.html
  • K.-H. Park, M. A. Suhaimi, G.-D. Yang, D.-Y. Lee, S.-W. Lee, and P. Kwon, "Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)," International Journal of Precision Engineering and Manufacturing, vol. 18, pp. 5-14, 2017.
  • K.-H. Park, G.-D. Yang, M.-G. Lee, H. Jeong, S.-W. Lee, and D. Y. Lee, "Ecofriendly face milling of titanium alloy," International journal of precision engineering and manufacturing, vol. 15, pp. 1159-1164, 2014.
  • K.-H. Park, G.-D. Yang, M. Suhaimi, D. Y. Lee, T.-G. Kim, D.-W. Kim, et al., "The effect of cryogenic cooling and minimum quantity lubrication on end milling of titanium alloy Ti-6Al-4V," Journal of Mechanical Science and Technology, vol. 29, pp. 5121-5126, 2015.
  • K. Venugopal, S. Paul, and A. Chattopadhyay, "Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling," Wear, vol. 262, pp. 1071-1078, 2007.
  • K. Kubiak and J. Sieniawski, "Development of the microstructure and fatigue strength of two phase titanium alloys in the processes of forging and heat treatment," Journal of Materials Processing Technology, vol. 78, pp. 117-121, 1998.
  • K. D. Edkins, N. J. van Rensburg, and R. F. Laubscher, "Evaluating the subsurface microstructure of machined Ti-6Al-4V," Procedia CIRP, vol. 13, pp. 270-275, 2014.
  • J. Zhao, Z. Liu, B. Wang, Y. Hua, and Q. Wang, "Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools," Ceramics International, 2018.
  • J. P. Vel squez, A. Tidu, B. Bolle, P. Chevrier, and J.-J. Fundenberger, "Subsurface and surface analysis of high speed machined Ti–6Al–4V alloy," Materials Science and Engineering: A, vol. 527, pp. 2572-2578, 2010.
  • J. F. Shackelford, Y.-H. Han, S. Kim, and S.-H. Kwon, CRC materials science and engineering handbook: CRC press, 2016.
  • J. C. Rozzi, J. K. Sanders, and W. Chen, "The experimental and theoretical evaluation of an indirect cooling system for machining," Journal of Heat Transfer, vol. 133, p. 031006, 2011.
  • J. Barry, G. Byrne, and D. Lennon, "Observations on chip formation and acoustic emission in machining Ti–6Al–4V alloy," International Journal of Machine Tools and Manufacture, vol. 41, pp. 1055-1070, 2001.
  • J. Arsecularatne, L. Zhang, and C. Montross, "Wear and tool life of tungsten carbide, PCBN and PCD cutting tools," International Journal of Machine Tools and Manufacture, vol. 46, pp. 482-491, 2006.
  • ISO, " Tool life testing with single-point turning tools," International Standard, vol. 3685, 1993.
  • I. Standard and E. ISO, "4287: 1997: Geometrical Product Specifications (GPS)-- Surface texture: Profile method--Terms, definitions and surface texture parameters," International Organization for Standardization, 1998.
  • I. Lee, V. Bajpai, S. Moon, J. Byun, Y. Lee, and H. W. Park, "Tool life improvement in cryogenic cooled milling of the preheated Ti–6Al–4V," The International Journal of Advanced Manufacturing Technology, vol. 79, pp. 665-673, 2015.
  • I. Jawahir, H. Attia, D. Biermann, J. Duflou, F. Klocke, D. Meyer, et al., "Cryogenic manufacturing processes," CIRP annals, vol. 65, pp. 713-736, 2016.
  • G. Welsch, R. Boyer, and E. Collings, Materials properties handbook: titanium alloys: ASM international, 1993.
  • G. Sutter and G. List, "Very high speed cutting of Ti–6Al–4V titanium alloy–change in morphology and mechanism of chip formation," International Journal of Machine Tools and Manufacture, vol. 66, pp. 37-43, 2013.
  • G. L tjering, "Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys," Materials Science and Engineering: A, vol. 243, pp. 32-45, 1998.
  • G. L tjering and J. C. Williams, Engineering materials and processes: titanium: Springer-Verlag Berlin Heidelberg New York 2007.
  • G. Germain, F. Morel, J.-L. Lebrun, and A. Morel, "Machinability and surface integrity for a bearing steel and a titanium alloy in laser assisted machining (optimisation on LAM on two materials)," Lasers in Engineering, vol. 17, p. 329, 2007.
  • G. E. Totten, Handbook of residual stress and deformation of steel: ASM international, 2002.
  • F. Klocke, W. K nig, and K. Gerschwiler, "Advanced machining of titanium-and nickel-based alloys," in Advanced Manufacturing Systems and Technology, ed: Springer, 1996, pp. 7-21.
  • F. Klocke, L. Settineri, D. Lung, P. C. Priarone, and M. Arft, "High performance cutting of gamma titanium aluminides: Influence of lubricoolant strategy on tool wear and surface integrity," Wear, vol. 302, pp. 1136-1144, 2013.
  • E. Ezugwu, J. Bonney, and Y. Yamane, "An overview of the machinability of aeroengine alloys," Journal of materials processing technology, vol. 134, pp. 233-253, 2003.
  • E. Ezugwu and Z. Wang, "Titanium alloys and their machinability—a review," Journal of materials processing technology, vol. 68, pp. 262-274, 1997.
  • E. Brinksmeier, D. Meyer, A. Huesmann-Cordes, and C. Herrmann, "Metalworking fluids—Mechanisms and performance," CIRP Annals- Manufacturing Technology, vol. 64, pp. 605-628, 2015.
  • D. Ulutan and T. Ozel, "Machining induced surface integrity in titanium and nickel alloys: a review," International Journal of Machine Tools and Manufacture, vol. 51, pp. 250-280, 2011.
  • D. Bhattacharyya, M. Allen, and S. Mander, "Cryogenic machining of Kevlar composites," Material and Manufacturing Process, vol. 8, pp. 631-651, 1993.
  • D. Bernoulli, "Hydrodynamica," Dulsecker. Consultable en ligne http://imgbasescd- ulp. u-strasbg. fr/displayimage. php, 1738.
  • C. R. Dandekar, Y. C. Shin, and J. Barnes, "Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining," International Journal of Machine Tools and Manufacture, vol. 50, pp. 174-182, 2010.
  • C. Machai and D. Biermann, "Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow," Journal of Materials Processing Technology, vol. 211, pp. 1175-1183, 2011.
  • C. Leyens and M. Peters, Titanium and titanium alloys: fundamentals and applications: John Wiley & Sons, 2003.
  • B. Kramer, "On tool materials for high speed machining," Journal of Engineering for Industry, vol. 109, pp. 87-91, 1987.
  • A. Vyas and M. Shaw, "Mechanics of saw-tooth chip formation in metal cutting," Journal of Manufacturing Science and Engineering, vol. 121, pp. 163-172, 1999.
  • A. Vyas and M. Shaw, "Mechanics of saw-tooth chip formation in metal cutting," Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 121, pp. 163-172, 1999.
  • A. Shokrani, V. Dhokia, and S. T. Newman, "Comparative investigation on using cryogenic machining in CNC milling of Ti-6Al-4V titanium alloy," Machining Science and Technology, vol. 20, pp. 475-494, 2016.
  • A. Molinari, C. Musquar, and G. Sutter, "Adiabatic shear banding in high speed machining of Ti–6Al–4V: experiments and modeling," International journal of Plasticity, vol. 18, pp. 443-459, 2002.
  • A. Ginting and M. Nouari, "Surface integrity of dry machined titanium alloys," International Journal of Machine Tools and Manufacture, vol. 49, pp. 325-332, 2009.
  • A. Bordin, S. Sartori, S. Bruschi, and A. Ghiotti, "Experimental investigation on the feasibility of dry and cryogenic machining as sustainable strategies when turning Ti6Al4V produced by Additive Manufacturing," Journal of cleaner production, vol. 142, pp. 4142-4151, 2017.
  • A. Bordin, S. Bruschi, A. Ghiotti, and P. Bariani, "Analysis of tool wear in cryogenic machining of additive manufactured Ti6Al4V alloy," Wear, vol. 328, pp. 89-99, 2015.
  • A. Bayoumi and J. Xie, "Some metallurgical aspects of chip formation in cutting Ti-6wt.% Al-4wt.% V alloy," Materials Science and Engineering: A, vol. 190, pp. 173-180, 1995.
  • A. Bagherzadeh and E. Budak, "Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach," Tribology International, vol. 119, pp. 510-520, 2018.