연구동향 분석
박사

프란시스수차 흡출관 캐비테이션 불안정성 억제에 관한 연구 = A Study on the Suppression of Cavitation Instability in the Draft Tube of a Francis Hydro Turbine Model

Zhenmu Che 2018년

논문상세정보
인용/피인용
' 프란시스수차 흡출관 캐비테이션 불안정성 억제에 관한 연구 = A Study on the Suppression of Cavitation Instability in the Draft Tube of a Francis Hydro Turbine Model' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • Francis turbine
  • J-Groove
  • cavitation
  • drafttube
  • flow instability
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
134 0

0.0%

' 프란시스수차 흡출관 캐비테이션 불안정성 억제에 관한 연구 = A Study on the Suppression of Cavitation Instability in the Draft Tube of a Francis Hydro Turbine Model' 의 참고문헌

  • Zwart, P., Gerber, A., and Belamri, T., (2004), A two-phase flow model for predicting cavitation dynamics, ICMF 2004 International Conference on Multiphase Flow, Japan.
  • Zuo, Z.-G., Liu, S.-H., Liu, D.-M., Qin, D.-Q., and Wu, Y.-L., (2015), Numerical Analysis of Pressure Fluctuations Induced by Interblade Vortices in a Model Francis Turbine, J ournal of Hydrodynamics, 27 4 513-521.
  • Zhangduo, XIANGJIABA hydropower station, FEATURED H Hydropower hydropower station largest dam world's largest Francis turbine xiangjiaba, Available at: http://www.myhydropower.com/2016/04/xiangjiabahydropower –station-chinas.html.
  • Yu, A., Luo, X., and Ji, B., (2015), Studies of the Effect of Vortex-Control Grooves on Pressure Oscillations in a Francis Turbine Draft Tube, P roceedings of ASME-JSME-KSME joint Fluids Engineering Conference.
  • Yu, A., Luo, X., Ji, B., (2015), Studies of the Effect of Vortex-Control Grooves on Pressure Oscillations in a Francis Turbine Draft Tube, ASME-J SME-KSME J oint Fluids Engineering Conference 2015, AJKFluids 2015-02539, Seoul, Korea.
  • Yu, A., Luo X. W.， and Ji, B.， (2015), Numerical Simulation and Analysis of the Internal Flow in a Francis Turbine with Air Admission, IOP Conf. Series: Materials Science and Engineering, 72 042047
  • Yonezawa, K., Konishi, D., Miyagawa, K., Avellan, F., Doerfler, P., and Tsujimoto, Y., (2012), Cavitation Surge in a Small Model Test Facility Simulating a Hydraulic Power Plant, International J ournal of Fluid Machinery and Systems, 5 4 152-160.
  • Yao, Z., Xiao, R., Wang, F., and Yang, W., (2015), Numerical Investigation of Cavitation Improvement for a Francis Turbine, J ournal of P hysics: Conference Series, 656 012075.
  • Xiao, Y., Wang, Z., Yan, Z., Li, M., Xiao, M., and Liu, D., (2010),Numerical Analysis of Unsteady Flow Under High Head Operating Conditions in Francis Turbine, Engineering Computer: International J ournal for Computer Aided Engineering and Software, 27 (3) 365-386.
  • Xiao, R., Wang, Z., Luo, Y., (2008), Dynamic Stresses in a Francis turbine Runner Based on Fluid-Structure Interaction Analysis. Tsinghua Science and Technology. 13 587–592.
  • Wu, Y., Liu, J., Sun, Y., Liu, S., and Zuo, Z., (2013), Numerical analysis of flow in a Francis turbine on an equal critical cavitation coefficient line, J ournal of Mechanical Science and Technology, 27 6 1635-1641.
  • Wu, J., Shimmei, K., Tani, K., Niikura, K., and Sato, J., (2007), CFD-Based Design Optimization for Hydro Turbines, J ournal of Fluids Engineering, 129 159-168.
  • Wei, Q., and Choi, Y.-D., (2013), The Influence of Guide Vane Opening on the Internal Flow of a Francis Turbine, J ournal of the Korean Society of Marine Engineering, 37 3 274-281.
  • Wei, Q., Zhu, B., Choi, Y.D., (2012), Internal Flow Characteristics in the Draft Tube of a Francis Turbine. Journal of Korean Society Marine Engineering, 36 618–626.
  • Wei, Q., Choi, Y.D., (2013), The Influence of Guide Vane Opening on the Internal Flow of a Francis Turbine. J ournal of Korean Society Marine Engineering, 37 274–281.
  • Wei, H., Fu, S., Wu, Q., Huang, B., and Wang, G., (2014), Experimental and Numerical Research on Cavitating Flows Around Axisymmetric Bodies, J ournal of Mechanical Science and Technology, 28 11 4527-4537.
  • Wang, H., Ruprecht, A., Gode, E., and Riedelbauch, S., (2015), Analysis and Control of the Part Load Vortex Rope in the Draft Tube of a Pumpturbine, 6th IAHR meeting of the Working Group "Cavitation and Dynamic P roblems in Hydraulic Machinery and Systems", Ljubljana, Slovenia.
  • Takahiro, T., Matsuzaka, R. Miwa, T., and Miyagawa, K., (2015), Effect of cavitation volume on flow instability in a diffuser with swirling flow, Proc. of 13th Asian International Conference on Fluid Machinery, Tokyo, Japan.
  • Taguchi, G., & Wu, Y. (1980). Introduction to off-line quality control. Nagoya: Central Japan Quality Control Association.
  • Susan-Resiga, R., Muntean, S., Hasmatuchi, V., Anton, L., and Avellan, F., (2010), Analysis and Prevention of Vortex Breakdown in the Simplified Discharge Cone of a Francis Turbine, J ournal of Fluid Engineering, 132 051102
  • Susan-Resiga, R., Muntean, S., Hasmatuchi, V., Anton, I., and Avellan, F., (2010), Analysis and Prevention of Vortex Breakdown in the Simplified Discharge Cone of a Francis Turbine, J ournal of Fluids Engineering, 132 (5) 051102.
  • Subbarao P. M. V. Design Analysis of P arts of Francis Turbine, Indian Institute of Technology, Available at: http://web.iitd.ac.in/~pmvs/courses/ mel346/mel346-21&22.ppt.
  • Sorensen, B., (2007), Renewable Energy Conversion, Transmissional Storage, Elsevier.
  • Shao, Q., Liu, S., Wu, Y., Wu, W., and Tao, X., (2004), Three dimensional of unsteady flow in a model francis hydraulic turbine, Tsinghua Science and Technology, 9 (6) 694-699.
  • Sawin, J. L., and Martinot, E., (2013), Renewables 2013 Global Status Report, Renewable Energy Policy Network for 21st Century, REN21 Secretariat, Paris, France.
  • Sawin, J. L., Sverrisson, F., and Rickerson, W., (2015), Renewables 2015 Global Status Report, Renewable Energy Policy Network for 21st Century, REN21 Secretariat, Paris, France, Report No. 978-3-9815934-6-4.
  • Sawin, J. L., Sverrisson, F., and Martinot, E., (2014), Renewables 2014 Global Status Report, Renewable Energy Policy Network for 21st Century, REN21 Secretariat, Paris, France, Report No. 978-3-9815934-2-6.
  • Sano, T., Ookawa, M., Watanabe, H., Okamoto, N., Yano, H., Fukuda, N., Maekawa, M., and Miyagawa, K., (2011), A New Methodology for Suppressing Pressure Pulsation in a Draft Tube by Grooved Runner Cone, P roceedings of the ASME-JSME-KSME 2011 J oint Fluids Engineering Conference, AJK 2011-07027, Hamamatsu, Shizuoka, Japan.
  • Sano, T., Maekawa, M., Okamoto, N., Yano, H., and Miyagawa, K., (2012), Investigation of Flow Pattern Downstream of Spiral Grooved Runner Cone in Pump-turbine, IOP Conf. Series: Earth and Environmental Science, 15 022019.
  • Sallaberger M., (1996) Quasi-Three-Dimensional and Three-Dimensional Flow Calculation in a Francis Turbine, ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition Volume 1: Turbomachinery, Birmingham, UK, 96-GT-038
  • Saha, S. L., Kurokawa, J., Matsui, J., and Imamura, H., (2000), Suppression of Performance Curve Instability of a Mixed Flow Pump by Use of J-groove, J ournal of Fluids Engineering, 122 592-597.
  • Saha, S. L., Kurokawa, J., Matsui J., and Imamura, H., (2000), Suppression of Performance Curve Instabiligy of a Mixed Flow Pump by Use of J-groove, J ournal of Fluids Engineering, 122 592-597.
  • Round, G. F., (2004), Incompressible Flow Turbomachines Design, Selection, Applications, and Theory, Elsevier-Gulf Professional Publishing, Burlington, MA.
  • Romeo, S-R., Vu, T. C., Muntean, S., Ciocan, G. D., and Nennemann, B., (2006), Jet Control of the Draft Tube Vortex Rope in Francis Turbines at Partial Discharge, P roceedings of the 23rd IAHR Symposium on Hydraulic Machinery and Systems.
  • Rocha, G., Sillos, A. (1982). Power Swing Produced by Hydropower Units. IAHR Section Hydraulic Machinery, Equipment, and Cavitation, 11th Symposium (Amsterdam, 1982), Vol. 2, Paper 44.
  • Renewable Energy Policy Network for the 21st Century, (2017), Renewables 2017 Global Status Report, Renewable Energy Policy Network for the 21st Century, Paris, France.
  • Rama S. R. Gorla, and Aijaz A. Khan, (2003), Turbomachinery: design and theory. Marcel Dekker Inc., New York.
  • Radha, H. C., (1997), Hydraulic Design of Hydraulic Machinery, International Editorial Committee Chairman, Duan C G, Secretary, A P Boldy.
  • R. Susan-Resiga, Thi C. Vu, S. Muntean, G. D. Ciocan, and B. Nennemann, (2006), Jet Control of the Draft Tube Vortex Rope in Francis Turbines at Partial Discharge, 23rd IAHR Symposium on Hydraulic Machinery and Systems. Yokohama, Japan
  • Qian, Z. D., Li, W., Huai, W. X., and Wu, Y. L., (2011), The Effect of Runner Cone Design on Pressure Oscillation Characteristics in a Francis Hydraulic Turbine, P roceedings of the Institution of Mechanical Engineers, P art A: J ournal of P ower and Energy, 226 137-150.
  • Qian, Z-D., Yang, J-D. and Huai, W-X., (2007). Numerical Simulation and Analysis of Pressure Pulsation in Francis Hydraulic Turbine with Air Admission, Journal of Hydrodynamics, Ser. B, 18 (4): 467-472
  • Prace, A., (2015), Study of the Dissipation in Spiraling Vortical Structures, Doctor Thesis: BRNO UNIVERSITY OF TECHNOLOGY, FACULTY OF MECHANICAL ENGINEERING ENERGY INSTITUTE.
  • Park, J.-H., (2016), 2016 Energy Info. Korea, Korea Energy Economics Institute Republic of Korea.
  • Papillon, B., Sabourin, M., Couston, M., and Deschenes, C., (2002), Methods for Air Admission in Hydroturbines, P roceedings of XXIst IAHR Symposium on Hydraulic Machinery and Systems, Lausanne.
  • Papillon, B., Sabourin, M., Couston, M., and Deschenes, C., (2002), Methods for Air Admission in Hydroturbines, P roc. of the XXIst IAHR Symposium on Hydraulic Machinery and Systems, Lausanne.
  • Nishi, M., and Liu, S., (2013), An Outlook on the Draft-Tube-Surge Study, International J ournal of Fluid Machinery and System, 6 1 33-48.
  • Nishi, M., Wang, X. M., Yoshida, K., and Takahashi, T., (1996) ,An Experimental Study on Fins, Their Role in Control of the Draft Tube Surging, P roc. 18th IAHR Symp. on Hydraulic Machinery and Cavitation, Valencia, Vol. 2, pp. 905-914.
  • Nishi, M., Kubota, T., Matsunaga, S., and Senoo, Y., (1988), Spiral Vortex Core and Pressure Fluctuation in Draft Tubes, Turbomachinery, Vol 16 (2). (In Japanese).
  • Nishi M., and Liu, S., (2013), An outlook on the draft-tube-surge study, International J ournal of Fluid Machinery and Systems, 6 (1) 33-48.
  • Nechleba, M., (1957), Hydraulic Turbine: Their Design and Equipment, Artia: Prague, Czechoslovakia.
  • Nakashima, T., Matsuzaka, R., Miyagawa, K., Yonezawa, K., and Tsujimoto, Y., (2015), Study on Flow Instability and Countermeasure in a Draft Tube Swirling Flow, International J ournal of Fluid Machinery and Systems, 8 (4) 230-239.
  • Nakashima, T., Matsuzaka, R., Miyagawa, K., Yonezawa, K., and Tsujimoto, Y., (2014), Study on flow instability and countermeasure in a draft tube with swirling flow, P roc. of 27th IAHR Symposium on Hydraulic Machinery and Systems, Montreal, Canada.
  • Nakashima, T., Matsuzaka, R., Miwa, T., and Miyagawa, K., (2015), Effect of Cavitation Volume on Flow Instability in a Diffuser with Swirl Flow, The 13th Asian International Conference on Fluid Machinery, Tokyo, Japan.
  • Nakamura, K., and Kurosawa, S., (2009), Design Optimization of a High Specific Speed Francis Turbine Using Multi-Objective Genetic Algorithm, International J ournal of Fluid Machinery and System, 2 (2) 102-109.
  • Nagafuji, T., Uchida, K., Tezuka, K., and Sugama, K., (1999), Navier Sokes Prediction on Performance of a Francis Turbine with High Specific Speed ASME Fluids Engineering. (FEDSM99-7815)
  • Mukai, T., Yamauchi, T., Matsui, J., Suzuki, T., Tani, K., Pacot, O., Nakamura, T., Harada, S., Tamura, Y., and Kato, C., (2015), Experimental Study on Pressure Fluctuations in Draft Tube with Francis Turbine, The 13th Asian International Conference on Fluid Machinery, Tokyo, Japan.
  • Miyagawa, K., Sano, T., Kunimatsu, N., Aki, T., Nishi, M., (2006), Mitigation of Draft Tube Flow Instability with Auxiliary Parts in High Head Pump-turbines, 23rd IAHR Symposium on Hydraulic Machinery and Systems. Yokohama, Japan.
  • Menter, F.R. 1994. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA-Journal, 32(8), pp.1598-1605.
  • Melot, M., Nennemann, B., and D sy, N., (2014), Draft tube pressure pulsation predictions in Francis turbines with transient Computational Fluid Dynamics methodology, Proc. of 27th IAHR Symposium on Hydraulic Machinery and Systems, Montreal, Canada.
  • Mei, Z.Y. (1991), Mechanical Design and Manufacturing of Hydraulic Machinery; Avebury Technical: Hants, UK.
  • Mei, Z-Y., (1991), Mechanical design and manufacturing of hydraulic machinery, Avebury Technical.
  • Matsuzaka, R., Nakashima T., and Miyagawa, K., (2016), Study on Flow Instability in a Diffuser with Swirling Flow Under Several Conditions of Pipe Length and Swirl Intensity, 28th IAHR Section Hydraulic Machinery and Systems, Grenoble.
  • Marco, C. Optimization Methods: From Theory to Design, Springer Heidelberg New York Dordrecht London.
  • Lyutov, A. E., Chirkov, D. V., Skorospelov, V. A., Turuk, P. A., and Cherny, S. G., (2015), Coupled Multipoint Shape Optimization of Runner and Draft Tube of Hydraulic Turbines, J ournal Fluids Engineering, 137 (11) 111302.
  • Luo, X. -W., Ji, B., and Tsujimoto, Y., (2016), A Review of Cavitation in Hydraulic Machinery, J ournal of Hydrodynamics, 28 (3) 335-358.
  • Liu, J., Liu, S., Wu, Y., Jiao, L., Wang, L., and Sun, Y., (2012), Numerical Investigate of the Hump Characteristic of a Pump-turbine Based on an Improved Cavitation Model, Computers & Fluids, 68 105-111.
  • Liu, J., Liu, S., Sun, Y., Jiao, L., Wu, Y., and Wang, L., (2013), Three-dimensional flow simulation of transient power interruption process of a prototype pump-turbine at pump mode, J ournal of Mechanical Science and Technology, 27 5 1305-1312.
  • Li, W. F., Feng, J. J., Wu, H., Lu, J. L. and Luo, X. Q., (2015). Numerical Investigation of Pressure Fluctuation Reducing in Draft Tube of Francis Turbines, International J ournal of Fluid Machinery and Systems, 8 (3): 202-208.
  • Landry, C., (2015), Hydroacoustic Modeling of a Cavitation Vortex Rope for a Francis Turbine, Doctor Thesis: COLE POLYTECHNIQUE F D RALE DE LAUSANNE.
  • Kurokawa, J., Saha, S. L., Matsui, J., and Kitahora, T., (2000), Passive Control of Rotating Stall in a Parallel-Wall Vaneless Diffuser by Radial Grooves, Journal of Fluids Engineering, 122 90-96.
  • Kurokawa, J., Imaumura, H., and Choi, Y.-D., (2010), Effect of J-Groove on the Suppression of Swirl Flow in a Conical Diffuser, J ournal of Fluids Engineering, 132 071101.
  • Kurokawa, J., (2011), J-Groove Technique for Suppressing Various Anomalous Flow Phenomena in Turbomachines, International J ournal of Fluid Machinery and Systems, 4 (1) 1-13.
  • Kirschner, O., Schmidt, H., Ruprecht1, A., Mader, R. and Meusburger, P., (2010). Experimental Investigation of Vortex Control with an Axial Jet in the Draft Tube of a Model Pump-turbine, Institute of Physics Conference Series: Earth Environment Science, 12, 012-092.
  • Kirschner, O., Schmidt, H., Ruprecht, A., and Meusburger, P., (2010), Experimental investigation of vortex control with an axial jet in the draft tube of a model pump-turbine, IOP Conf. Series: Materials Science and Engineering, 12 012092.
  • Keck, H., Goede, E., and Pestalozzi, J., (1990), Experience with 3D Euler Flow Analysis as a Practical Design Tool, In P roc. of 16th IAHR Symp. (Sao Paolo, Brazil)
  • Kawajiri, H., Enomoto, Y., and Kurosawa, S., (2014), Design Optimization Method for Francis Turbine, IOP Conf. Series: Earth and Environmental Science, 22 012026
  • Kang, J.-S., and Yang, S.-S., (2012), Modeling and experimental evaluation of torque loss in turbine test rig for accurate turbine performance evaluation, J ournal of Mechanical Science and Technology, 26 2 473-479.
  • Kaewnai, S., and Wongwises, S., (2011), Improvement of the Runner Design of Francis Turbine using Computational Fluid Dynamics, American J ournal of Engineering and Applied Sciences, 4 4 540-547.
  • K-water, (2014), K-water 2014 substantiality report: 4 Focis issues, K-Water.
  • Ji, B., Wang, J., Luo, X., Miyagawa, K., Xiao, L. Z., Long, X., and Tsujimoto, Y., (2016), Numerical Simulation of Cavitation Surge and Vortical Flows in a Diffuser with Swirling Flow, J ournal of Mechanical Science and Technology, 30 (6) 2507-2514.
  • Jeon, J. H., Byeon, S. S., and Kim, Y. J., (2013), Effect of Draft Tube on the Hydraulic Performance of a Francis Turbine, IOP Conf. Series: Materials Science and Engineering, 52 052034
  • Jeon, J-H., Byeon, S-S., and Kim, Y-J., (2013), Numerical Study on the Flow Characteristics of the Francis Turbine with Various Blade Profiles, ASME 2013 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers.
  • Jasbir S. Arora, (2011), Introduction to Optimum Design (Third edition), Academic Press. p.742.
  • Jacob, T. and Prenat, E. (1996), Francis Turbine Surge: Discussion and Data Base, XVI I I IAHR symposium, Kluwer, Dordrecht, 855-864.
  • International Hydropower Association, Hydropower Status Report 2017, International Hydropower Association, London, UK.
  • International Hydropower Association, (2016), 2016 Hydropower Status Report, International Hydropower Association, United Kingdom.
  • Ingram, G., (2009), Basic concepts in turbomachinery, Bookboon: London, UK.
  • Ingram, G., (2009), Basic concepts in turbomachinery, Bookboon.
  • Huang, R., An, Y., Luo, X. and Ji, B., (2014). Numerical Simulation of Pressure Vibrations in a Francis Turbine Draft Tube with Air Admission, Proc. of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer , Chicago, Illinois, USA.
  • Gorla, R.S.R., Khan, A.A., Turbomachinery: Design and Theory; Marcel
  • Gong,R. Z., Wang, H. G., Yao, Y., Shu, L. F., and Huang, Y. J., (2012), Numerical simulation of pressure fluctuation in 1000MW Francis turbine under small opening condition, IOP Conf. Series: Earth and Environmental Science, 15 062038.
  • Gong, R. Z., Wang, H. G., Yal, Y., Shu, L. F., and Huang, Y. J., Numerical Simulation of Pressure Fluctuation in 1000MW Francis Turbine Under Small Opening Condition, IOP Conf. Series: Earth and Environmental Science, 15 (2012) 062038.
  • Foroutan, H., and Yavuzkurt, S., (2014), Flow in the Simplified Draft Tube of a Francis Turbine Operating at Partial Load—Part II: Control of the Vortex Rope, J ournal of Applied Mechanics, 81 061011
  • Feng, J.-J., Wu, H., Wu, G.-K., Guo, P.-C., and Luo, X.-Q., (2014) , Numerical simulation of pressure fluctuation in a Francis turbine at part load conditions with improved measures (In Chinese: 偏工况下混流式水轮机 压力脉动数值仿真及其改善措施研究), Shuili Xuebao, 45 (9) 1099-1055.
  • Feng, J. J., Li, W. F., Wu, H., Lu, J. L., Liao, W. L., and Luo, X. Q., (2014), Investigation on pressure fluctuation in a Francis turbine with improvement measures, IOP Conf. Series: Earth and Environmental Science, 22 032006.
  • Fen, J., Li, W., Xi, Q., Zhu, G. and Luo, X., (2017), Influence of water admission through main shaft central hole on performance of Francis turbine draft tube (In Chinese: 混流式水轮机主轴中心孔补水对尾水管性能的 影响), Transactions of the Chinese Society of Agricultural Engineering, 33 (3) 58-64.
  • Favrel, A. T., (2016), Dynamics of the Cavitation P recessing Vortex Rope for Francis Turbines at P art Load Operating Conditions, Doctor Thesis: COLE POLYTECHNIQUE F D RALE DE LAUSANNE.
  • Escaler, X., Egusquiza, E., Farhat, M., Avellan, F., and Coussirat, M., (2006), Detection of cavitation in hydraulic turbines, Mechanical Systems and Signal P rocessing, 20 983-1007.
  • Enomoto, Y., Nakamura, T., and Kurosawa, S., (2013), Design Optimization for Francis Turbine Runners (In Japanese: フランシス水車ラ ンナの最適化設計), ターボ機械, 41 (9) 58-64.
  • Enomoto, Y., Nakamura, T., and Kurosawa, S., (2012), Design Optimization of a High Specific Speed Francis Turbine Runner, IOP Conf. Series: Earth and Environmental Science, 15 032010.
  • Drinta P, Sallaberger M., (1999), Hydraulic Turbines- Basic Principle and State-of-the-Art Computation Fluid Dynamics Applications, Proceedings of the Institution of Mechanical Engineerings, Part C: Journal of Mechanical Engineering Science, 213 85-102
  • Derakhshan, Sh., and Mostafavi, A., (2011), Optimization of GAMM Francis Turbine Runner, International J ournal of Agricultural and Biosystems Engineering, 5 (11) 2139-2145.
  • Daugherty, R. L., (1920), Hydraulic Turbines: With a Chapter on Centrifugal P umps, McGraw-Hill Book Company, New York.
  • Daniel Marjavaara B., CFD Driven Optimization of Hydraulic Turbine Draft Tubes using Surrogate Models, Doctoral Thesis: Lule University of Technology, Department of Applied Physics and Mechanical Engineering, Division of Fluid Mechanics.
  • Coutier-Delgosha, O., Fortes-Patella, R., and Reboud, J. L., (2003), Evaluation of the Turbulence Model Influence on the Numerical Simulations of Unsteady Cavitation, J ournal of Fluids Engineering, 125 38-45.
  • Choi, Y.-D., Kurokawa, J., and Imamura, H., (2007), Suppression of Cavitation in Inducers by J-Grooves, J ournal of Fluids Engineering, 129 (1) 15-22.
  • Choi, G.W. (2014), K-Water 2014 Substantiality Report; K-Water: Deajeon, Korea.
  • Cho, S-Y., Cho, T-H., and Choi, S-K., (2005), An experimental study of the performance characteristics with four different rotor blade shapes on a small mixed-type turbine, J ournal of Mechanical Science and Technology, 19 7 1478-1487.
  • Chirkov, D., Avdyushenko, A., Panov, L., Bannikov, D., Cherny, S., Skorospelov V., and Pylev, I., (2012), CFD simulation of pressure and discharge surge in Francis turbine at off-design conditions, IOP Conf. Series: Earth and Environmental Science, 15 032038.
  • Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F., and Tsujimoto, Y., (2008), One-Dimensional Analysis of Full Load Draft Tube Surge, J ournal of Fluids Engineering, 130 041106.
  • Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F., Miyagawa, K., and Tsujimoto, Y., (2010), Experimental Study and Numerical Simulation of Cavity Oscillation in a Diffuser with Swirling Flow, International J ournal of Fluid Machinery and Systems, 3 1 80-90.
  • Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F., Miyagawa, K., and Tsujimoto, Y., (2010), Experiment Study and Numerical Simulation of Cavity Oscillation in a Diffuser with Swirl Flow, International J ournal of Fluid Machinery and Systems, 3 (1) 80-90.
  • Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F., Miyagawa, K., and Tsujimoto, Y., (2010), Experiment Study and Numerical Simulation of Cavity Oscillation in a Conical Diffuser, International J ournal of Fluid Machinery and Systems, 3 (1) 91-101.
  • Breivik, S. R., (2011), CFD-Analysis of a Runner and Draft Tube in a Francis Turbine (CFD-analyse av l pehjul og suger r i en Francis turbin), Master Thesis: Norwegian University of Science and Technology, Institutt for energi-og prosessteknikk.
  • Biela, V. (1998). Draft Tube Fins. IAHR Section on Hydraulic Machinery and Cavitation, 19th Symposium (Singapore, 1998), pp. 454–461.
  • Barnes, F. S., and Jonah, G. L., (2011), Large Energy Storage Systems Handbook, CRC Press.
  • Ayli, E., Celebioglu, K., and Aradag, S., (2016), Determination and Generalization of the Effects of Design Parameters on Francis Turbine Runner Performance, Engineering Applications of Computational Fluid Mechanics, 10 (1) 545-564.
  • Avellan, F., (2004), Introduction to Cavitation in Hydraulic Machinery, The 6 th International Conference on Hydraulic Machinery and Hydrodynamics, Timisoara, Romania, October 21-22, 2004.
  • Ariff, M., Salim, S.M., Cheah, S.C., (2009), Wall Y+ Approach for Dealing with Turbulent Flow over a Surface Mounted Cube: Part 2—High Reynolds Number, In P roceedings of the 7th International Conference on CFD in the Minerals and P rocess Industries, Melbourne, Australia.
  • Ariff, M., Salim, S.M., Cheah, S.C., (2009), Wall Y+ Approach for Dealing with Turbulent Flow over a Surface Mounted Cube: Part 1—Low Reynolds Number. In P roceedings of the 7th International Conference on CFD in the Minerals and P rocess Industries, Melbourne, Australia.
  • An American National Standard, (1998). Test Uncertainty – Instrument and Apparatus, The American Society of Mechanical Engineers, Performance Test Codes, New York, ASME PTC 19.1-1998.
  • Alligne, S. (2011), Forced and Self Oscillations of Hydraulic Systems Induced by Cavitation Vortex Rope of Francis Turbines, Doctor Thesis: COLE POLYTECHNIQUE F D RALE DE LAUSANNE.
  • ANSYS Inc., ANSYS CFX, Ver. 18, 2017.
  • ANDRITZ, Turbines for hydropower plants: By using a Generator, hydro turbines convert the kinetic power of water into electrical energy, Available at: Https://www.andritz.com/products-en/group/products/ turbines-hydropower Retrieved 10, Jan 2018.