연구동향 분석
박사

PSC박스 곡선 다주거더교의 비틀림 거동과 구조안전성 = Torsional Behaviors and Structural Stability of PSC-BOX Curved Multi-Girder Bridge

우정원 2018년

논문상세정보
인용/피인용
' PSC박스 곡선 다주거더교의 비틀림 거동과 구조안전성 = Torsional Behaviors and Structural Stability of PSC-BOX Curved Multi-Girder Bridge' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 「?
  • 가로보
  • 격벽
  • 곡률반경
  • 곡선교
  • 뒤틀림
  • 모드해석
  • 비틀림
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
134 0

0.0%

' PSC박스 곡선 다주거더교의 비틀림 거동과 구조안전성 = Torsional Behaviors and Structural Stability of PSC-BOX Curved Multi-Girder Bridge' 의 참고문헌

  • 프리캐스트 곡선 PSC 거더의 구조 성능에 관한 실험연구
    Choi, Woo Suk Kim, Tae Kyun Lee, Doo Sung 김태균 이두성 최우석 대한토목학회논문집, 제35권, 제4호, 747-757쪽 [2015]
  • 콘크리트구조설계기준
    한국콘크리트학회 [2009]
  • 도로교설계기준-한계상태설계법
    한국도로교통협회 [2016]
  • 도로교설계기준
    한국도로교통협회 [2010]
  • 박사
    “프리캐스트 바닥판 PSC 합성거더 교량의 수평전단 및 사용 성 설계,”
    현병학 단국대학교, 박사학위논문 [2005]
  • “프리캐스트 곡선 PSC 박스 거더 공 법,”
    김성배 김성재 김장호 엄기하 한국콘크리트학회논문집, 제24권, 제4호, 3-42쪽 [2012]
  • 박사
    “콘크리트 박스거더 시공시의 비틂 변형,”
    성명모 단국대학교, 박사 학위논문 [2005]
  • “전달행렬법에 의한 곡선교의 정적해석에 관한 연구,”
    이윤영 경남대학 교, 박사학위논문 [2004]
  • “소리굽쇠 아치형 합성거더의 구조거동,”
    손석호 서울시립대학교, 박 사학위논문 [2014]
  • “사각을 갖는 슬래브 교량의 하중분배 효과에 관한 연구,”
    김영진 정철헌 대한토목학회논문집, Vol.17, 597-605쪽 [1997]
  • “등가감쇠비를 이용한 역량스펙트럼법에 의 한 곡선교의 비탄성지진응답 평가,”
    마정석 조성국 조양희 한국지진공학회논문집, Vol.13, No.1, 17-26쪽 [2009]
  • “뒴과 회전관성을 고려한 수평곡선보 의 자유진동 해석,”
    박광규 오상진 이병구 진태기 한국전산구조공학회논문집, 제14권, 제1호, 35-42쪽 [2001]
  • “나선형 곡선부재의 동적 해석,”
    임성순 서울대학교, 박사학위논문 [1987]
  • “교좌장치에 관한 연구”
    한국도로공사 도로연구소 [1993]
  • “곡선상자 거더교의 뒤틀림 해석 및 fDW/fb 비에 대한 실용적인 공식에 관한 연구,”
    김광호 김용희 이윤영 대한토목학회논문집, 제24권, 제 6A호, 1203-1210쪽 [2004]
  • “곡선교의 받침특성에 따른 주행차량하중분배 특 성분석
    김상효 이용선 조광일 ” 한국강구조학회논문집, 제14권, 6호, 711-720쪽 [2002]
  • “곡선강교 설계 및 구조상세기술개발연구”
    한국건설교통기술평가원 [2005]
  • “곡선 개구제형 거더의 곡률 에 따른 매개변수 해석연구,”
    강영종 김종민 최병호 최준호 한택희 한국강구조학회논문집, 제24권, 제2호, 175 -188쪽 [2012]
  • “곡선 강상자형 거더의 뒤틀림 해석 및 격 벽간격산정,”
    구민세 김대홍 윤우현 이호경 한국강구조학회논문집, 제15권, 제2호, 125-135쪽 [2003]
  • “곡선 강박스 거더의 휨-뒤틀림 응 력비에 따른 중간 다이아프램 간격,”
    강영종 이기세 이정화 임정현 최준호 Korea Academia-Industrial cooperation Society, Vol.16, No.9, 6325-6332쪽 [2015]
  • “강박스거더의 중간다이아프램 설계에 관한 연 구,”
    이두성 이성철 최헌 대한토목학회 논문집, 제24권, 제3A호, 623-630쪽 [2010]
  • “PSC빔 교량 중간격벽의 최적 설계에 관한 연구”
    한국도로공사 도로연구소 [2000]
  • “B3-Spline 함수를 이용한 곡선형 교량 해석,”
    곽효경 송종용 최준호 대한 토목학회논문집, 제22권, 제2A호, 229-241쪽 [2002]
  • “3차원 쉘 요소를 사용한 다실 박스거더의 뒤틀림 해 석 - I. 확장된 방법의 제안 및 적용성 -,”
    강영종 박남희 대한토목학회논문집, 제24권, 제3A호, 557-572쪽 [2004]
  • Yoo, C.H.(1982), "Flexural-Torsional Stability of Curved Beams," Proceedings ASCE, Journal of the Engineering Mechanics Division, Vol.108, pp.1351-1369.
  • Yoo, C.H.(1979), "Matrix Formulation of Curved Girders," Journal of the Engineering Mechanics Division, ASCE, Vol.105, No.2, pp.339-354.
  • Yoo, C.H. and P.A. Pfeiffer(1983), "Elastic Stability of Curved Members," ASCE Journal of Structural Engineering, Vol.109, pp.2922-2940.
  • Yoo, C. H. and J.P. Fehrenbach(1981), "Natural Frequencies of Curved Girders," Proceedings ASCE, Journal of the Engineering Mechanics Division, Vol.107, pp.339-354.
  • Wright, R. N., R. Sana, A. Samad and A.R. Robinson(1968), "BEF Analogy for Analysis of Box Girders," Journal of the Structural Division, ASCE, Vol.94, No.ST7, pp.1719-1743.
  • Vlasov, V.Z.(1961), "Thin-Walled Elastic Beams," 2nd ed., National Science Foundation, Washington, D.C.
  • Timoshenko, S. P. and J.N. Goodier(1970), Theory of Elasticity, McGrow-Hill.
  • Timoshenko, S. P. and J.M. Gere(1963), Theory of Elastic Stability, McGrow-Hill.
  • Sun, C., S.A. Hennessey, M.S. Ahlman and M.K. Tadros(2007), “Value Engineering Arbor Road Bridge with Curved Precast Concrete Girder,” PCI Journal, Vol.52, No.2, pp.94-106.
  • Sennah, K.M. and J.B. Kennedy(2001), "State of the art in design of curved box-girder bridges," Journal of Bridge Engineering, Vol.6, No.3, pp.159-161.
  • Rosignoli, M.(1998), "Nose-Deck Interaction in Launched Prestressed Concrete Bridges," Journal of Bridge Engineering, ASCE, Vol.3, No.1, pp.21-27.
  • Rosignoli, M.(1998), "Misplacement of Launching Bearing in PC Launched Bridges," Journal of Bridge Engineering, ASCE, Vol.3, No.4, pp.170-176.
  • Rabizad, R.O.(1974), "Static and Dynamic Analysis of Horizontally Curved Box Girder Bridges," Ph.D. Thesis, University of Pennsylvaina.
  • PCI, 2011, Precast Prestressed Concrete Bridge Design Manual, 3rd Ed., Vol.2, Precast/Prestressed Concrete Institute, Chicago, IL.
  • Oleinik, J.C. and C.P. Heins(1975). “Diaphragms for Curved Box Beam Bridges.” ASCE, Journal of Structural Division, vol. I01, no.10, October, pp.2161-2178.
  • Ojalvo, M., E. Demuts and F.J. Tokarz(1969), "Out-of-plane Buckling of Curved Members," Proceedings ASCE, Journal of the Structural Division, Vol.95, pp.2305.
  • Nakai, H. and Y. Murayama(1981), "Distortional Stress Analysis and Design at Horizontally Curved Box Girder Bridges with Diaphragms," Transactions of JSCE, Vol.13, November, pp.35-37.
  • Nakai, H. and C.H. Yoo(1988), Analysis and Design of Curved Steel Bridges, McGraw-Hill, NY.
  • NCHRP (2008), Design Specifications and Commentary for Horizontally Curved Concrete Box Girder Highway Bridges, National Cooperative Highway Research Program Final Report.
  • Morris, D.L.(1968), "Curved beam stiffness coefficients," ASCE, Vol.94, No.ST5, pp.165-1174.
  • MIDAS FEA Analysis and Algorithm, MIDAS IT, 2014.
  • Lin, C.S. and D.A. Van Horn(1968), "The Effect of Midspan Diaphragms on Load Distribution in a Prestressed Concrete Box-Beams Bridge," Fritz Engineering Laboratory Report, No.315.6, Lehigh University Institute of Research.
  • Kang, Y.J. and C.H. Yoo(1994), “Thin-walled Curved Beams I : Formulation of Nonlinear Equations,” Journal of Engineering Mechanics Divisions, ASCE, Vol.120, No.10, pp.2072-2101.
  • Jury, R.D., J. P. Hollings, and T. J. Catley(1989), “Design of A Curved 414M Long Continuous Concrete Railway Bridge to Resist Earthquake Motions,” Bulletin of The New Zealand National Society for Earthquake Engineering, Vol.22, No.1, pp.50-56.
  • Hsu, Y.T. and C.C. Fu(1995), "EBEF Method for Distortional Analysis of Steel Box Girder Bridge," Journal of the Structural Division, ASCE, Vol.121, No.3, pp.557-566.
  • Ho, Y.S.(1972), "Analysis and Design of Curved Composite Box Girder Bridges." Ph.D. Thesis, University of Maryland.
  • Heteny, M.(1946), Beams on Elastic Foundation : Theory with Applications in the Fields of Civil and Mechanical Engineering, The University of Michigan Press.
  • Heins, C.P. and W.H. Lee(1981), “Curved Box-Girder Bridge Test: Field Test,” ASCE, Journal of Structural Division, vol. 107, no., 2, February, pp.317-327.
  • Heins, C.P. and M.A. Sahin(1979), "Natural Frequency of Curved Box Girder Bridges," Computers and Structures, vol.15.no.3, pp241-258.
  • Garcia, A.M.(1999), "Intermediate Diaphragms for Precast Prestressed Concrete Bridge," Western Bridge Engineer's Seminar.
  • Fickel, H.H.(1959), "Analysis of curved girders," ASCE, Vol.85, No.ST7, pp.113-141.
  • Daniels, J.H.(1985), "Ultimate Strength Tests of a Horizontally Curved Composite Box-Girder," Fritz Lab Report 454.‘ J. CE Dept., Lehigh University.
  • Dabrowski, R.(1965), "Approximate Analysis of the Curved Box Girder of Deformable Cross-Section," 7th IABSE Congress, preliminary publication, Zurich, Switzerland, pp.299-306.
  • Culver, C.G. and P.P. Christiano(1969), "Horizontally Curved Bridges Subjected to Moving Load," Journal of Structural Division, Vol.95, No.8, pp.1615-1643.
  • Culver, C.G. (1967), "Natural Frequencies of Horizontally Curved Beams," Journal of Structural Division, ASCE, Vol.93, No.ST8, pp.189-203.
  • Cook, R.D., D.S. Malkus and M.E. Plesha(1988), Concepts and Applications of Finite Element Analysis, 3rd Ed., John Wiley & Sons, Inc., New York.
  • Chaudhuri, S. K. and S. Shore(1977), "Dynamic Analysis of Horizontally Curved I-Girder Bridges," Journal of Structural Division, ASCE, Vol.103, No.ST8, pp.1589-1604.
  • Campbell, T.I., E.Y.K. Lee and K. S. Chan(1980), “Strength of Continuous Horizontally Curved Post-Tensioned Beams,” PCI Journal, pp.118-145.
  • Buchanan, J.D., C.H. Yoo and C.P. Heins(1974), “Field Study of a Curved Box Beam Bridge. Maryland University, College Park, Department of Civil Engineering, September, Interim Report, pp.16
  • Boresi, A.P., R.J. Schmidt and O.M. Sidebottom(1993), Advanced Mechanics of Materials, 5th Ed., John Wiley & Sons, Inc., New York.
  • Batdorf, S.B.(1947), "A simplified method of elastic-stability analysis of thin cylindrical shells. Ⅱ-Modified equilibrium equation." NACA TN No. 1342, National Advisory Committee for Aeronautics, Washington, D.C.
  • BSI(2000), British Standard: Steel, Concrete and composite bridges, British Standard Institution.
  • Arizurni, Y., S. Hamada and T. Oshiro(1983), "Static Behavior of Curved Composite Box Girder." JSCE, vol. 15, Tokyo, Japan, pp.212-216.
  • Amorn, W., Y.T. Christoper and K.T. Maher(2008) “Curved, precast, pretensioned concrete I-girder bridge,” PCI Journal, pp.48-66.
  • Abendroth, R.E., F.W. Klaiber and M.W. Shafer(1995), "Diaphragm Effectiveness in prestressed-concrete girder bridges.", Journal of Structural Engineering, ASCE, 121(9), pp.1362-1369.
  • ABAM Engineers (1998), "Precast Prestressed Concrete Horizontally Curved Bridge Beams." Journal of the Prestressed Concrete Institute, Vol. 33, No.5, Precast/Prestressed Concrete Institute, Chicago.
  • AASHTO(2012), LRFD Bridge Design Specifications, 6th ed., American association of State Highway and Transportation Officials,444 North Capitol Street, N.W., Suite 249 Washington, D.C.
  • AASHTO(2003), Guide Specifications for Horizontally Curved Highway Bridges, American association of State Highway and Transportation Officials 444 North Capitol Street, N.W., Suite 249 Washington, D.C.
  • AASHTO(2002), Standard Specifications for Highway Bridges, American association of State Highway and Transportation Officials, 444 North Capitol Street, N.W., Suite 249 Washington, D.C.