연구동향 분석
박사

수착성 광산화 복합체 제조를 통한 강알칼리성 황 함유폐수 처리

이민희 2018년

논문상세정보
인용/피인용
' 수착성 광산화 복합체 제조를 통한 강알칼리성 황 함유폐수 처리' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 강알칼리성 황 함유폐수
  • 광촉매 산화
  • 석탁회 바닥재
  • 수착성 광산화 복합체
  • 이산화티타늄
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
35 0

0.0%

' 수착성 광산화 복합체 제조를 통한 강알칼리성 황 함유폐수 처리' 의 참고문헌

  • “석유정제품 제조업 폐수처 리장 최적처리기술을 위한 경제성 평가”
    권오상 김상훈 김재훈 양형재 윤현정 이성종 대한환경공학회 학술발표논문집, 12, pp. 268-275 [2007]
  • “Spent Sulfidic Caustic의 BNR 공정 적용을 위한 최적화 연구”
    박정진 신춘환 이재호 주동진 한국환경과학지, 20(2), pp. 1617-1624 [2011]
  • “Spent Sulfidic Caustic (SSC) 폐수처리를 위한 흡착 광산화 시스템(APS)”
    김종규 이민희 최준성 대한토목학회지, 65(4), pp 74-76 [2017]
  • Zheng, L., Pi, F., Wang, Y., Xu, H., Zhang, Y., Sun, X. (2016). “Photocatalytic degradation of acephate, omethoate, and methyl parathion by Fe3O4 SiO2 TiO2 nano microspheres” J. Hazard Mater, 315, pp. 11–22.
  • Zhang, Q., Liu, S., Yang, C., Chen, F., Lu, S. (2014). “Bioreactor consisting of pressurized aeration and dissolved air flotation for domestic wastewater treatment” Separation and Purification Technology, 138, pp. 186–190.
  • Zhang, L., Lee, Y. W., Jahng, D. (2012). “Ammonia stripping for enhanced biomethanization of piggery wastewater” Journal of Hazardous Materials, 199-200, pp. 36-42.
  • Zhang, G., Sun, Z., Hu, Xiaolong., Song, Ankang., Zheng, Shuilin. (2017). “Synthesis of BiOCl/TiO2 – zeolite composite with enhanced visible light photoactivity” Journal of the Taiwan Institute of Chemical Engineers, 81, pp. 435–444.
  • Yucheng, W., Xiaoye, H., Ting, X., Guanghai, L., Lide, Z. (2005) “Phase structure of w-doped nano-TiO2 produced by sol-gel method” China particuology, 3(4), pp. 233-236.
  • Yavuz, Y., Koparal, A. S., ğ tveren, . B. (2010). “Treatment of petroleum refinery wastewater by electrochemical methods” Desalination, 258(1–3), pp. 201–205.
  • Xiao, Y., Chen, T., Hu, Y., Wang, D., Han, Y., Wang, Y. L. X. (2014). “Advanced treatment of semiconductor wastewater by combined MBR–RO technology” Desalination, 336, pp. 168–178.
  • Wu, F., Wu, P., Tseng, R. and Juang, R. (2010) "Preparation of activated carbons from unburnt coal in bottom ash with KOH" Journal of Environmental Management, 91, pp. 1097-1102.
  • Wanichaya, M., Thanakorn, K., Jiravat, R., Wicharn, T., Wisanu, P. (2013). “Effect of Nitrogen Doping on Optical and Photocatalytic Properties fo TiO2 Thin Film Prepared by spin Coating Process” Energy Procedia, 34, pp. 746-750.
  • Wang, J., Wang, H., Yu, J. (2017). “Synthesis of 1-D porous TiO2 on fly ash carriers through surface modification method” Journal of Physics and Chemistry of Solids, 107, pp. 7–13.
  • Wang, C., Wang, H. (2018). “Pb(II) sorption from aqueous solution by novel biochar loaded with nano-particles” Chemosphere, 192, pp. 1-4.
  • Walling, C. (1975). “Fenton’s reagent revisited” Acc Chem, 8, pp. 125-131.
  • Vincent, O. F., Emer, C. (1999). “Effect of sulphate addition on volatile fatty acid and ethanol degradation in an anaerobic hybrid reactor. I: process disturbance and remediation” Bioresource Technology, 68, pp. 109-120.
  • Verma, S., Prasad, B., Mishra, I. M. (2011). “Thermochemical treatment (Thermolysis) of petrochemical wastewater : COD removal mechanism and floc formation” Ind Eng Chem Res, 50(9), pp. 5352-5359.
  • Venkata, P. L. R., Beluri, K., Police, A. K. R., Kim, K. H. (2017). “TiO2-based photocatalytic disinfection of microbes in aqueous media: A review” Environmental Research, 154, pp. 296-303.
  • Vanessa, R. U., Milena, G. M., Montserrat, P. M., Jose, R. G. (2017) “Influence of pH and ozone dose on sulfaquinoxaline ozonation” Journal of Environmental Management, 195, pp. 224-231.
  • Vaiopoulou, E., Provijn, T., Prevoteau, A., Pikaar, I., Ravaey, K. (2016). “Electrochemical sulfide removal and caustic recovery from spent caustic streams” Water Research, 92, pp. 38-43.
  • Uslu, G., Demirc, A., Regan, J. M. (2016). “Disinfection of synthetic and real municipal wastewater effluent by flow-through pulsed UV-light treatment system” Journal of Water Process Engineering, 10, pp. 89–97.
  • Upadhye, V., Joshi, S. (2012). “Advances in wastewater treatment- a review” Chem Sci, 3, pp. 264-326.
  • Umar, M., Roddick, F., Fan, L., Aziz, H. A. (2013). “Application of ozone for the removal of bisphenol A from water and wastewater – A review” Chemosphere, 90, pp. 2197–2207.
  • Tiwari, M., Sahu, S. K., Bhangare, R. C., Ajmal, P. Y., Pandit, G. G. (2014). “Elemental characterization of coal, fly ash, and bottom ash using an energy dispersive X-ray fluorescence technique” Applied Radiation and Isotopes, 90, pp. 53-57.
  • Tian, C., Zhang, Q., Wu, A., Jiang, M., Liang, Z., Jiang, B., Fu, H. (2012). “Cost-effective largescale synthesis of ZnO photocatalyst with excellent performance for dye photodegradation” Chem Commun, 48, pp. 2858–2860.
  • Talat, M. (2009). “Detection of copper (II) in aqueous solution by immobilized urease obtained from Agro-waste: Optimization of process variables” Biotechnol Bioprocess Eng, 14, pp. 474-481.
  • Sun, W. L., Qu, Y. Z., Yu, Q., Ni, J, R. (2008). “Adsorption of organic pollutants from coking and papermaking wastewaters by bottom ash” Journal of Hazardous Materials, 154(1-3), pp. 595-601.
  • Sizmur, T., Fresno, T., Akgul, G. K. E., Frost, H., Moreno-Jimenez, E. (2017). “Biochar modification to enhance sorption of inorganics from water” Bioresource Technology, 246, pp. 34–47.
  • Sipma, J., Svitelskaya, A., Janssen, A. J. H., Mark, B. V. D., Hulshoff Pol, L. W., Lettinga, G. (2004). “Potentials of biological oxidation processes for the treatment of spent sulfidic caustics containing thiols” Water Research, 38, pp. 4331–4340.
  • Sheu, S-H. S. and Weng, H-S. (2001). "Treatment of olefin plant spent caustic by combination and fenton reaction" Wat Res, 35(8), pp. 2017-2032.
  • Sharma, V., Triantis, T., Antoniou, M., Pelaez, X., Dionysiou, D. (2012). “Destruction of microcystins by conventional and advanced oxidation processes: a review” Sep Purif Technol, 91, pp. 3-17.
  • Shaoxia, Y., Zhengqian, L., Xiaohui, H., Beiping, Z. (2010). “Wet air oxidation of epoxy acrylate monomer industrial wastewater” Journal of Hazardous Materials, 178, pp. 786-791.
  • Setthaya, N., Chindaprasirt, P., Yin, S., Pimraksa, K. (2017). “TiO2-zeolite photocatalysts made of metakaolin and rice husk ash for removal of methylene blue dye” Powder Technology, 313, pp. 417–426.
  • Sergi, G. S., Joey, D. O., Meng, N. C. (2018). “Electrochemical oxidation remediation of real wastewater effluents – A review” Process Safety and Environmental Protection, 113, pp. 48-67.
  • Senn, A. M., Russo, Y. M., Litter, M. I. (2014). “Treatment of wastewater from an alkaline cleaning solution by combined coagulation and photo-Fenton processes” Separation and Purification Technology, 132, pp. 552-560.
  • Sayid, S., Abu, M., Noor, Z., Noor, S., Aris, A. (2014). “Fenton and photo-fenton oxidation of sulfidic spent caustic: a comparative study based on statistical analysis” Environmental Engineering and Management Journal, 13(3), pp. 531–538.
  • Sajedeh, S. G. H., Hilmi, B. M., Jean, N. Y. D., Tan, C. G., Ang, B. C., Navid, R. (2018). “Microstructural characterization and mechanical properties of bottom ash mortar” Journal of Cleaner Production, 170, pp. 797-804.
  • Saien, J., Nejat, I. H. (2007). “Enhanced photocatalytic degradation of pollutants in petroleum refinery wastewater under mild conditions” Journal of Hazardous Materials, 148, pp. 491–495.
  • Rodriguez, M., 2003, “Fenton and UV-vis Based Advanced Oxidation Processes in Wastewater Treatment: Degradation, Mineralization and Biodegradability Enhancement”, Ph.D. Thesis, Barcelona University, Spain.
  • Rengifo, H. J., Mielczarski, E., Mielczarski, J., Castillo, N., Kiwi, J., Pulgarin, C. (2008). “Escherichia coli inactivation by N, S co-doped commercial TiO2 powders under UV and visible light” Appl Catal B: Environ, 84, pp. 448–456.
  • Preethi, V., Kanmani, S. (2017). “Performance of nano photocatalysys for the recovery of hydrogen and sulphur from sulphide containing wastewater” International journal of hydrogen energy, In press, Corrected proof.
  • Petrović, S., Rožić, L., Vuković, Z., Grbić, B., Radić, N., Stojadinović, S., Vasilić, R. (2017). “Structural and fractal characterization of tungstophosphoric acid modified titanium dioxide photocatalyst” Journal of Physics and Chemistry of Solids, 103, pp. 95– 102.
  • Petrie, B., McAdam, E. J., Lester, J. N., Cartmell, E. (2014). “Assessing potential modifications to the activated sludge process to improve simultaneous removal of a diverse range of micropollutants” Water Res, 64, pp. 180-192.
  • Omprakash, S. (2017). “Catalytic thermal pre-treatments of sugar industry wastewater with metal oxides : Thermal treatment” Experimental Thermal and Fluid Science, 85, pp. 379-387.
  • Olmos, A., Olguin, P., Fajardo, C., Razo, E., Monroy, O. (2004). “Physicochemical characterization of spent caustic from the OXIMER process and sour waters from mexican oil refineries” Energy & Fuels, 18(2), pp. 302–304.
  • Oliveira, H. G., Ferreira, L. H., Bertazzoli, R., Longo, C. (2015). “Remediation of 17- α-ethinylestradiol aqueous solution by photocatalysis and electrochemically-assisted photocatalysis using TiO2 and TiO2/WO3 electrodes irradiated by a solar simulator” Water Res, 72, pp. 305–314.
  • Nancharaiah, Y. V., Venkata Mohan, S., Lens, P. N. L. (2015). “Metals removal and recovery in bioelectrochemical systems : a review” Bioresour Technol, 195, pp. 102-114.
  • Myers, R. H. and Montgomery, D. C., 2002, Response Surface Methodology: Product and Process Op-timization Using Designed Experiments, John Wiley & Sons, New York.
  • Muhtaseb, H. A., Khraisheh, M. (2015). “Photocatalytic removal of phenol from refinery wastewater: Catalyticactivity of Cu-doped titanium dioxide” Journal of Water Process Engineering, 8, pp. 82–90.
  • Mittal, A., Kurup, L., Gupta, V. K. (2005). “Use of waste materials—bottom ash and de-oiled soya, as potential adsorbents for the removal of Amaranth from aqueous solutions” J Hazard Mater, 117(2–3), pp. 171–178.
  • Mirbolooki, H., Amirnezhadb, R., Pendashteh, A. R. (2017). “Original Treatment of high saline textile wastewater by activated sludge micro organisms” Journal of Applied Research and Technology, 15, pp. 167–172.
  • Mingming, L., Guolin, J., Yongjian, P., Dcbin, L., Lifeng, J. (2017). “Treatment of refractory organic pollutants in industrial wastewater by wet air oxidation” Arabin Journal of Chemistry, 10, pp. 769-776.
  • Milind, V. J. and Vujaykumar V. M. (1999). “Insight into spent caustic treatment: on wet oxidation of thiosulfate of thiosulfate to sulfate” J. Chem Technol Biotechnol, 74, pp. 437-444.
  • Miege, C., Choubert, J. M., Riberio, L., Eusebe, M., Coquery, M. (2009). “Fate of pharmaceuticals and personal care products in wastewater treatment plants – Conception of database and first results” Environ Pollut, 157(5), pp. 1721-1726.
  • Michal, S., Aneta, K., Petra, K., Radovan, S., Martin P., Boleslav, Z., Michael, P., Karel, S., Miroslav, P. (2017). “Material analysis of Bottom ash from waste-to-energy plants” Waste Management, In Press, Corrected proof.
  • MiarAlipour, S., Friedmann, D., Scott, J., Amal, R. (2018). “TiO2/porous adsorbents: Recent advances and novel applications” Journal of Hazardous Materials, 341, pp. 404– 423.
  • Metcalf. and Eddy., 2004, Wastewater Engineering Treatment and Reuse, McGraw-Hill, New York.
  • Madawala, L. D. J., Eric, D. V. H., Ajit., P. A. (2014). “Reuse options for coal fired power plant bottom ash and fly ash” Rev Environ Sci Biotechnol, 13(4), pp. 467-486.
  • Luo, Y., Guo, W., Ngo, H. H., Nghiem, L. D., Hai, F. I., Zhang, J., Liang, S., Wang, X. C. (2014). “A review on the occurrence of micropollutants in the aquatic environment and their fate and removal during wastewater treatment” Sci. Total Environ, 473-474, pp. 619-641.
  • Losert, S., Von Goetz, N., Bekker, C., Fransman, W., Wijnhoven, S. W. P., Delmaar, C., Hungerbuhler, K., Ulrich, A. (2014). “Human exposure to conventional and nanoparticle-containing sprays – a critical review” Environ Sci Technol, 48, pp. 5366-5378.
  • Liu, Z. S., Li, W. K., Huang, C. Y. (2014). “Synthesis of mesoporous silica materials from municipal solid waste incinerator bottom ash” Waste Management, 34, pp. 893-900.
  • Liu, G., Ji, J., Huang, H., Xie, R., Feng, Q., Shu, Y., Zhan, Y., Fang, R., He, M., Liu, S., Ye, X., Leng, D. Y. C. (2017). “UV/H202 : An efficient aqueous advanced oxidation process for VOCs removal” Chemical Engineering Journal, 324, pp. 44-50.
  • Lin, S. H., Chiou, C. H., Chang, C. K., Juang, R. S. (2011). “Photocatalytic degradation of phenol on different phases of TiO2 particles in aqueous suspensions under UV irradiation” Journal of Environmental Management, 92(12), pp. 3098-3104.
  • Libralato, G., Ghirardini, A. V., Avezzu, F. (2008). “Evaporation and air-stripping to assess and reduce ethanolamine toxicity in oily wastewater” Jouranal of Hazardous Materials, 153, pp. 928-936.
  • Li, H., Zhang, W., Zhang, Z., Zhang, X. (2017). “Sorption of triclosan to carbon nanotubes: The combined effects of sonication, functionalization and solution chemistry” Science of the Total Environment, 580, pp. 1318–1326.
  • Lee, S. Y. and Park, S. J. (2013). “TiO2 photocatalyst for water treatment applications” Journal of Industrial and Engineering Chemistry, 19, pp. 1761–1769.
  • Lauana, P. S., Leda, R. D. A. F., Fernanda, F. H., Paulo, R. C., Thamiris, D. C. G., Greicelence, J. D. S., Lucas, H. F. P. (2017). “Effects of ozone treatment on postharvest carrot quality” LWT- Food Science and Technology, 90, pp. 53-60.
  • Lapara, T. M. and Alleman, J. E. (1999). “Thermophilic aerobic biological wastewater treatment,” Water Res, 33, pp. 895-908.
  • Kumfer, B., Felch, C., Maugans, C., 2010, “Wet air oxidation treatment of spent caustic in petroleum refineries.” National Petroleum Refiner's Association Conference, Phoenix AZ, pp. 21-23.
  • Kim, J. K., Jawaher, A., Alisson, C. B., Joo, J. C., Ahn, H. S., Luiza, C. C. (2013). “Degradation of Humic Acid by Photocatalytic Reaction Using Nano-sized ZnO/Laponite Composite (NZLC)” Water Air Soil Pollut, 224, pp. 1749.
  • Khraisheh, M., Kim, J., Campos, L., Al-Muhtaseb, A., Walker, G. and AlGhouti, M. (2013). “Removal of carbamazepine from water by a novel TiO2-coconut shell powder/UV process: composite preparation and photocatalytic activity” Environ Eng Scl, 30(9), pp. 515~526.
  • Kalarivalappil, V., Divya, C. M., Wunderlich, W., Kumar, V., Vijayan, B. K. (2016). “Pd Loaded TiO2 Nanotubes for the effective catalytic reduction of p-Nitrophenol” Catal Lett, 146, pp. 474-482.
  • Jung, Y., Hong, E., Kwon, M., Kang, J. W. (2017). “A kinetic study of ozone decay and bromine formation in saltwater ozonation : Effect of O3 dose, salinity, pH, and temperature” Chemical Engineering Journal, 312, pp. 30-38.
  • Jorge, V., Sergio, V., Luis, R., Gloria, R., Juan, M. (2012). “Characterization and photocatalytic evaluation of polypropylene and polyethylene pellets coated with P25 TiO2 using the controlled-temperature embedding method Author links open overlay panel” Chemical Engineering Journal, 203, pp. 398-405.
  • Joo, N. M., Kim, B. K., Kim, A. K. (2012). “The Optimization of Jelly with Blueberry Juice using Response Surface Methodology” The Korean Society of Food and Nutrition, 25(1), pp. 17-25,
  • Johnson, K. M., Kumar, A. M. R., Ponmurugan, P., Gananamangai, M. (2010) “Ultraviolet Radiation and Its germicidal effect in drinking water purification” Journal of phytology, 2(5), pp. 12-19.
  • Jintao, T., Lujuan, C., Jinhui, D., Xin, W., Yansherng, Y., Pingwei, W. (2009). “Preparation and characterization of TiO2, ZnO, and TiO2/ZnO nanofilms via sol-gel process” Ceramics Internation, 35(6), pp. 2261-2270.
  • Jie, F., George, Z. (2014). “Wet air oxidation for the decolorization of dye wastewater: An overview of the last two decades” Chinese Journal of Catalysis, 35(1), pp. 1-7.
  • Jaworek, A. (2007). “Electrospray droplet sources for thin film depostion” Mater Sci, 42, pp. 266-297.
  • Javed, A. K., Xuexiang, H., Noor, S. S., Murtaza, S., Hasan, M. K., Dionysios D, D. (2017). “Degradation kinetics and mechanism of desethyl-atrazine and desisopropyl-atrazine in water with ∙OH and SO∙4- based-AOPs” Chemical Engineering Journal, 325, pp. 485-494.
  • Jan, S., Anna, S., Van Der Mark, B., Look, W. H. P., Gatze, L., Cees, J. N. B., Albert, J. H. J. (2004). “Potentials of biological oxidation processes for the treatment of spent sulfidic caustics containing thiols” Water Research, 38(20), pp. 4331-4340.
  • Hussain, M., Akhter, P., Iqbal, J., Ali, Z., Yang, W., Shehzad, N., Maieed, K., Sheikh, R., Amiad, U., Russo, N. (2017). “VOCs photocatalytic abatement using nanostructured titania-silica catalysts” Journal of Environmental Chemical Engineering, 5, pp. 3100– 3107.
  • Huma, H., Qaisar, M., Arshid, P., Zulfiqar, A. B., Shams, A. B. (2015). “Comparative decolorization of dyes in textile wastewater using biological and chemical treatment” Separtation and Purification Technolohy, 154, pp. 149-153.
  • Hu, N., Wu, Z., Ding, L., Li, R., Huang, D., Li, H., Zheng, H. (2016). “Removal of polyacrylonitrile oligomers from acrylic fiber wastewater using two-stage flotation” Chemical Engineering Journal, 306, pp. 186-192.
  • Hosseini, A., Icli, K. C., Ozenbas, M., Ercelebi, C. (2014). “Fabrication and characterization of spin-coated TiO2 films” Energy Procedia, 60, pp. 191-198.
  • Hench, L. L. and West, J. K. (1990). “The Sol-gel Process” The Chemical Review, 90(1), pp. 33-72.
  • Hawari, A., Ramadan, H., Abu, R. I., Ouederni, M. (2015). “A comparative study of the treatment of ethylene plant spent caustic by neutralization and classical and advanced oxidation” Journal of Environmental Management, 151, pp. 105-112.
  • Hariz, B. I., Halleb, A., Adhoum, N., Monser, L. (2013). “Treatment of petroleum refinery sulfidic spent caustic wastes by electrocoagulation” Separation and Purification Technology, 107, pp. 150–157.
  • Hamidah, A., Maksudur, R. K., Huei, R, O., Zahira, Y. (2017) “Modified TiO2 photocatalyst for CO2 photocatalytic reduction: An overview” Journal of CO₂ Utilization, 22, pp. 15–32.
  • Gupta, V. K., Mittal, A., Krishnan, L. and Gajbe, V. (2004). "Adsorption kinetics and column operations for the removal and recovery of malachite green from wastewater using bottom ash" Separation and Purification Technology, 40, pp. 87-96.
  • Graaff, M. D., Biimans, M. F. M., Abbas, B., Euverink, G. J. W., Muyzer, G., Janssen, A. J. H. (2011). “Biological treatment of refinery spent caustics under halo-alkaline conditions” Bioresource Technology, 102, pp. 7257–7264.
  • Gogate, P., Pandit, A. (2004). “A review of imperative technologies for wastewater treatment I: oxidation technologies at ambient conditions” India Adv Environ, 8, pp. 501-551.
  • Genc, A. and Oguz, A. (2010). "Sorption of acid dyes from aqueous solution by using non-ground ash and slag" Desalination, 264, pp. 78-83.
  • Garg, A., Mishra, I. M., Chand, S. (2005). “Thermochemical precipitation as a pretreatment step for the chemical oxygen demand and color removal from pulp and pater mill effluent” Ind Eng Chem Res, 44, pp. 2016-2026.
  • Gaidau, C., Petica, A., Ignat, M., Popescu, L. M., Piticescu, R. M., Tudor, I. A., Piticescu, R. R. (2017). “Preparation of silica doped titania nanoparticles with thermal stability and photocatalytic properties and their application for leather surface functionalization” Arabian Journal of Chemistry, 10, pp. 985–1000.
  • Francisca, C. M., Rui, A. R. B., Enric, B., Vitor, J. P. V. (2017). “Electrochemical advanced oxidation processes : A review on their application to synthetic and real wastewaters,” Applied Catalysis B : Environmental, 202, pp. 217-261.
  • Forest, F. (2015). “Spent Caustic Treatment with OHP Wet Peoxide Oxidation” http://www.fmcforet.com/Portals/FMCForetTO/Content/Docs/Spent%20Caustic%20treatment%20with%20OHP.pdf
  • Firdaus, C. M., Shah, R. M. S. B., Rusop, M., Rahmatul, H. S. (2012). “Characterization of ZnO and ZnO : TiO2 thing Flims Prepared by Sol-Gel Spray-Spin Coating Technique” Procedia Engineering, 41, pp. 1367-1373.
  • EreTech. (2005) “Practic completion for New Minitab (MINITAB Realease 14 Korean version)”
  • El-Magied, M. O. A., Galhoum, A. A., Atia, A. A., Tolba, A. A., Mazie, M. S., Vincentb, T., Guibal, E. (2017). “Cellulose and chitosan derivatives for enhanced sorption of erbium(III)” Colloids and Surfaces A, 529, pp. 580–593.
  • Eilbeck, W. J. and Mattock, G., 1987, Chemical process in waste water treatment, Ellis Horwood Ltd, Chichester, England.
  • EPA. (1999). “Alternative Disinfectants Oxidants Guidance Manual,” EPA, 815-R-99-014.
  • Dincer, A. R., Gunes, Y., Karakaya, N. (2007). “Coal-based bottom ash (CBBA) waste material as adsorbent for removal of textile dye stuffs from aqueous solution” J Hazard Mater, 141(3), pp. 529-535.
  • Dincer, A. R., Gunes Y. and Karakaya, N. (2007). "Comparison of activated carbon and bottom ash for removal of reactive dye from aqueous solution" Bioresource Technology, 98, pp. 834-839.
  • Dewil, R., Mantzavinos, D., Poulios, I., Rodrigo, M. A. (2017) “New perspectives for Advanced Oxidation Processes” Journal of Environmental Management, 195, pp. 93-99.
  • Deowan, A. S., Galiano, F., Hoinkis, J., Johnson, D., Gabriele, S. A. A. B., Hilal, N., Figoli, E. A. F. (2016). “Novel low-fouling membrane bioreactor (MBR) for industrial wastewater treatment” Journal of Membrane Science, 510, pp. 524–532.
  • Damalas, C. A., Eleftherohorinos, I. G. (2011). “Pesticide Exposure, Safety Issues, and Risk Assessment Indicators” J. Environ, 8(5), pp. 1402-1419.
  • Coman, V., Robotin, B., Ilea, P. (2013). “Nickel recovery/removal from industrial wastes: A review” Resources Conservation and Recycling, 73, pp. 229-238.
  • Coelho, A., Castro, A. V., Dezotti, M., Sant'Anna, G. L. (2006). “Treatment of petroleum refinery sour water by advanced oxidation processes” Journal of Hazardous Materials, 137(1), pp. 178–184.
  • Chrisanthi. V., Epaminondas, V., Kostis, M. (2017). “Process development for chemical stabilization of fly ash from municipal solid waste incineration” Chemical Engineering Research and Design, 125, pp. 57-71.
  • Choi, K. J., Kim, S. G., Kim, S. H. (2008). “Removal of antibiotics by coagulation and granular activated carbon filtration” Journal of Hazardous Materials, 151, pp. 38-43.
  • Chin, A., Berube, P. R. (2005) “Removal of disinfection by-product precursors with ozone-UV advanced oxidation process,” Water Research, 39, pp. 2136-2144.
  • Chen, K. T., Lu, C. S., Chang, T. H., Lai, Y. Y., Chang, T. H., Wu, C. W., Chen, C. C. (2010). “Comparison of photodegradative efficiencies and mechanisms of Victoria Blue R assisted by Nafion-coated and fluorinated TiO2 photocatalysts” Journal of Hazardous Materials, 174(1–3), pp. 598-609.
  • Chedly, T., Latifa, B., Loubna, M., Ahmed, G. (2007) “Landfill leachate treatment with ozone and ozone/hydrogen peroxide systems” Journal of Hazardous Materials, 140, pp. 316-324.
  • Carmen, S. D. R., Ricardo, A. C. B., Vanessa, N. L., Luis, M. M. (2018). “p-Nitrophenol degradation by Fenton's oxidation in a bubble column reactor” Journal of Environmental Management, 206, pp. 774-785.
  • Bruna, K., Nathan, L. V., Khalid, M., Vania, Z. P., Rosana, C., Elessandra, D. R. Z., Alvaro, R. G. D. (2014). “Ozone oxidation of cassava starch in aqueous solution at different pH” Food Chemisty, 155, pp. 167-173.
  • Brinker, C. J. and Scherer, G. W., 1990, Sol-Gel Science, Academic press, Inc, San Diego, United States of America.
  • Bornside, D. E., Macosko, C. W. and Scriven, L. E. (1987). “On Modeling of Spin Coating” J. Imaging Tech, 13.
  • Ben, W., Qiang, Z., Yin, X., Qu, J., Pan, X. (2014). “Adsorption behavior of sulfamethazine in an activated sludge process treating swine wastewater” Journal of environmental science, 26, pp. 1623-1629.
  • Barrett, M., Fitzhenry, K., Flaherty, V. O., Doreb, W., Keaveney, S., Cormican, M., Rowan, N., Clifford, E. (2016). “Detection, fate and inactivation of pathogenic noro virus employing settlement and UV treatment in wastewater treatment facilities” Science of the Total Environment, 568, pp. 1026–1036.
  • Bard, W. G., Baxendale, J. H., George, P. and Hargrave, K. R. (1951). “Reduction of Ferrous and Ferric Ions with Hydrogen peroxide. Part 1. The ferrous Ion Reduction” Journal of Chem Soc, 47, pp. 462-500.
  • Bai, X., Wang, L., Zong, R., Lv, Y., Sun, Y., Zhu, Y. (2013). “Performance enhancement of ZnO photocatalyst via synergic effect of surface oxygen defect and graphene hybridization” Langmuir, 29, pp. 3097–3105.
  • Azargohar, R. and Dalai, A. K. (2005). “Production of activated carbon from Luscar char: Experimental and modeling studies” Micropor Mesopor Mater, 85, pp. 219-225.
  • Ardalan, A. F., Hassanzadeh-Tabrizi, S. A., Saffar-Teluri, A. (2017). “Sol-gel synthesis and characterization of TiO2-CdO-Ag nanocomposite with superior photocatalytic efficiency” Ceramics International, In press, Corrected proof.
  • Angga, P. H., Suzana, Y., Muhammad, S., David, O. P. (2016). “Bottom ash characterization and its catalytic potential in biomass gasification” Procedia Engineering, 148, pp. 432-436.
  • Alvarez, C. J. R., Bergendahl, J. A., Hart, F. L. (2016). “Advanced oxidation of five contaminants in water by UV/TiO2 : reaction kinetics and byproducts identification” J. Environ Manage, 181, pp. 544–551.
  • Ahmad, W., 2010, “Eutralization of Spent Caustic from LPG Plant at Preem AB Goteborg”, A Master thesis, Mers University of Technology, Australia.
  • Agustina, T. E., Ang, H. M., Vareek, V. K. (2005) “A review of synergistic effect of photocatalysis and ozonation on wastewater treatment” J. Photochem Photobiol C Photochem, 6, pp. 264-273.
  • Adnan, H. K., Kim, J., Mark, S., Sheila M, M., Madhumita B, R. (2017). “Toxicity reduction and improved biodegradability of benzalkonium chlorides by ozone/ hydrogen peroxide advanced oxidation process” Separation and Purification Technology, 185, pp. 72-82.
  • Adawiya, J. H., Riyad, H. A. A., Ghadah, R. K., Chafic, T, S. (2017). “Exploring potential Environmental applications of TiO2 Nanoparticles” International Conference on Technologies and Materials for Renewable Energy Environment and Sustainability, 17, 21-24.