연구동향 분석
박사

Performance evaluation on the adsorptive removal of phosphate using marine macroalgae derived biochar

정태운 2018년

논문상세정보
인용/피인용
' Performance evaluation on the adsorptive removal of phosphate using marine macroalgae derived biochar' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • Batch and Columm test
  • biochar
  • calcium-alginate beads
  • electro-modification
  • marine macroalgae
  • modeling
  • phosphate adsorption
  • pot experiment
  • pyrolysis
  • response surface methodology
  • 모델링
  • 바이오차
  • 반응표면법
  • 배치 및 컬럼 실험
  • 소성
  • 인흡착
  • 전기 개량법
  • 칼슘-알지네이트 비드
  • 포트실험
  • 해조류
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
1,021 0

0.0%

' Performance evaluation on the adsorptive removal of phosphate using marine macroalgae derived biochar' 의 참고문헌

  • Zhou, Y., Gao, B., Zimmerman, A. R., Fang, J., Sun, Y., and Cao, X. (2013). “Sorption of heavy metals on chitosan-modified biochars and its biological effects.” Chemical Engineering Journal, 231, 512–518.
  • Zhao, X., Wang, J., Wang, S., and Xing, G. (2014). “Successive straw biochar application as a strategy to sequester carbon and improve fertility: A pot experiment with two rice/wheat rotations in paddy soil.” Plant Soil, 378, 279-294.
  • Zhang, W., Dong, L., Yan, H., Li, H., Jiang, Z., Kan, X., Yang, H., Li, A., and Cheng, R. (2011). “Removal of methylene blue from aqueous solutions by straw based adsorbent in a fixed-bed column.” Chemical Engineering Journal, 173(2), 429-436.
  • Zhang, M., and Gao, B. (2013). “Removal of arsenic, methylene blue, and phosphate by biochar/AlOOH nanocomposites.” Chemical engineering Journal, 210, 26-32.
  • Zhang, M., Gao, B., Yao, Y., and Inyang, M. (2013). “Phosphate removal ability of biochar/MgAl-LDH ultra-fine composites prepared by liquid-phase deposition.” Chemosphere, 92, 1042-1047.
  • Zhang, M., Gao, B., Yao, Y., Xue, Y., and Inyang, M. (2012). “Synthesis of porous MgO-biochar nanocomposites for removal of phosphate and nitrate from aqueous solutions.” Chemical Engineering Journal, 210, 26-32.
  • Zhang, J., Liu, J., and Liu, R. (2015). “Effects of pyrolysis temperature and heating time on biochar obtained from the pyrolysis of straw and lignosulfonate.” Bioresource Technology, 176, 288–291.
  • Zamparas, M., and Zacharias, I. (2014). Restoration of eutrophic freshwater by managing internal nutrient loads. A review. Science of Total Environment, 496, 551– 562.
  • Yoon, Y. H., and Nelson, J. H. (1984). “Application of gas adsorption kinetics Ⅰ. A theoretical model for respirator cartridge service life.” American Industrial Hygiene Association Journal, 45(8), 509-516.
  • Ye, M., Sun, M., Feng, Y., Wan, J., Xie, S., Tian, D., Zhao, Y., Wu, J., Hu, F., Li, H., and Jiang, X. (2016). “Effect of biochar amendment on the control of soil sulfonamides, antibiotic-resistant bacteria, and gene enrichement in lettuce tissues.” Bioresource Technology, 138, 8-13.
  • Yao, Y., Gao, B., Inyang, M., Zimmerman, A. R., Cao, X., Pullammanappallil, P., and Yang, L. (2011). “Removal of phosphate from aqueous solution by biochar derived from anaerobically digested sugar beet tailings.” Journal of Hazardous Materials, 190, 501-507.
  • Yao, Y., Gao, B., Chen, J., and Yang, L. (2013a). “Engineered biochar reclaiming phosphate from aqueous solutions: mechanisms and potential application as a slowrelease fertilizer.” Environmental Science and Technology, 47, 8700-8708.
  • Yao, Y., Gao, B., Chen, J., Zhang, M., Inyang, M., Li, Y., Alva, A., and Yang, L. (2013b). “Engineered carbon (biochar) prepared by direct pyrolysis of Mgaccumulated tomato tissues: Characterization and phosphate removal potential.” Bioresource Technology, 138, 8-13.
  • Yang, L., Liao, F., Huang, M., Yang, L., and Li, Y. (2015). “Biochar improves sugarcane seedling root and soil properties under a pot experiment.” Sugar Tech, 17(1), 36-40.
  • Yang, J., Xie, Y., and He, W. (2011). “Research progress on chemical modification of alginate: A review.” Carbohydrate Polymers, 84, 33-39.
  • Yang, H., Yan, R., Chin, T., Lee, D. T., Chen, H., and Zheng, C. (2004). “Thermogravimetric analysis-fourier transform infrared analysis of palm oil waste pyrolysis.” Energy and Fuels, 18, 1814-1821.
  • Yan, L., Huang, Y., Cui, J., and Jing, C. (2015). “Simultaneous As(III) and Cd removal from copper smelting wastewater using granular TiO2 columns.” Water Research, 68, 572-579.
  • Yagub, M. T., Sen, T. K., Afroze, S., and Ang, H. M (2014). “Dye and its removal from aqueous solution by adsorption: A review.” Advances in Colloid and Interface Science, 209, 172-184.
  • Xu, B., Zhang, B., Li, W., Huang, N., Chen, N., Feng, C., and Yao, L. (2014). “Production of reducing sugars from corn stover by electrolysis.” Journal of Applied Electrochemistry, 44, 797-806.
  • Xie, T., Reddy, K. R., Wang, C., Yargicoglu, E., and Spokas, K. (2015a). “Characteristics and Applications of Biochar for Environmental Remediation: A Review.” Critical Reviews in Environmental Science and Technology, 45, 939-969.
  • Xie, J., Lin, Y., Li, C., Wu, D., and Kong, H. (2015b). “Removal and recovery of phosphate from water by activated aluminum oxide and lanthanum oxide.” Powder Technology, 269, 351-357.
  • Wu, Z., Liu, F., Li, C., Chen, X., and Yu, J. (2016). “A sandwich-structured graphenebased composite: Preparation, characterization, and its adsorption behaviors for Congo red.” Colloids and Surface A: Physicochemical and Engineering Aspects, 509, 65-72.
  • Wei, Y., Yang, R., Zhang, Y. X., Wang, L., Liu, J. H., and Huang, X. J. (2011). “High adsorptive gamma-AlOOH (boehmite)@SiO2/Fe3O4 porous magnetic microspheres for detection of toxic metal ions in drinking water.” Royal Society of Chemistry, 47, 11062- 11064.
  • Wei, N., Quarterman, J., and Jin Y. S. (2013). “Marine macroalgae: an untapped resource for producing fuels and chemicals.” Trends in Biotechnology, 31(2), 70-77.
  • Weber, W., and Morris, J. (1963). “Kinetics of adsorption on carbon from solution”. Journal of the Sanitary Engineering Division. 89, 31-61.
  • Water Resources Management Information System (WAMIS). Water measurement network – Water quality. http://www.wamis.go.kr/wke/wke_wqbase_lst.aspx (August 08. 2017).
  • Wang, Z., Shen, D., Shen, F., and Li, T. (2016). “Phosphate adsorption on lanthanum loaded biochar.” Chemosphere, 150, 1-7.
  • Wang, Z., Nie, E., Li, J., Yang, M., Zhao, Y., Luo, X., and Zheng, Z. (2012). “Equilibrium and kinetics of adsorption of phosphate onto iron-doped activated carbon.” Chemosphere, 150, 1-7.
  • Wang, Y., Hu, Y., Zhao, X., Wang, S., and Xing, G. (2013). “Comparisons of biochar properties from wood material and crop residues at different temperatures and residence time.” Energy and Fuels, 27(10), 5890-5899.
  • Wang, S., Gao, B., Li, Y., Mosa, A., Zimmerman, A. R., Ma, L. Q., Harris, W .G., and Migliaccio, K. W. (2015). “Manganese oxide-modified biochars: Preparation, characterization, and sorption of arsenate and lead.” Bioresource Technology, 181, 13- 17.
  • Vohla, C., K iv, M., Bavor, H. J., Chazarenc, F., and Mander, . (2011). “Filter materials for phosphorus removal from wastewater in treatment wetlands—A review.” Ecological Engineering. 37, 70–89.
  • Vimonses, V., Sei, S., Jin, B., Chow, C. W. K., and Saint, C. (2009). “Kinetic study and equilibrium isotherm analysis of Congo Red adsorption by clay materials.” Chemical Engineering Journal, 148, 354-364.
  • Vijayaraghavan, K., Padmesh, T. V. N., Palanivelu, K., and Velan, M. (2016). “Biosorption of nickel(Ⅱ) ions onto Sargassum wightii: application of two-parameter and three parameter isotherm modes.” Journal of Hazardous Materials B, 133, 304- 308.
  • Vijayaraghavan, K., Jegan, J., palanivelu, K., and Velan, M. (2004). “Removal of nickel(II) ions from aqueous solution using crab shell particles in a packed bed up-flow column.” Journal of Hazardous Materials B, 113, 223-230.
  • Vigouroux, R. Z (2001). “Pyrolysis of biomass.” Dissertation, Roya l institute of Technology, Stockholm.
  • Vences-Alvarez, E., Velazquez-Jimenez, L. H., Chazaro-Ruiz, L. F., Diaz-Flores, P. E., and Rangel-Mendez, J. R. (2015). “Fluoride removal in water by a hybrid adsorbent lanthanum-carbon.” Journal of Colloid and Interface Science, 455, 194-202.
  • Uzoma, K. C., Inoue, M., Andry, H., Fujimaki, H., Zahoor, A., and Ni izar, E. (2011). “Effect of cow manure biochar on maize productivity under sandy soil condition.” Soil Use and Management, 27, 205-212.
  • Uchimiya, M., Wartelle, L. H., Klasson, K. T., Fortier, C. A., and Lima, I. M. (2011). “Influence of pyrolysis temperature on biochar property and function as a heavy metal sorbent in soil.” Journal of Agricultural and Food Chemistry, 59, 2501-2510
  • U.S. Environmental Protection Agency. (2009). Nutrient control design manual: State of technology review report. Cincinnati, OH: Office of Research and Development, National Risk Management Research Laboratory, Water Supply and Water Resources Division.
  • Trease, G. E., and Evanes, W. C. (1996) “Pharmacognosy”, 14th edition. W.B Saunders Company Ltd., London, Philadelphia, Toronto, Sydney, Tokyo, 18–27.
  • Thomas, H. C., (1944). “Heterogeneous ion exchange in a flowing system.” Journal of the American Chemical Society, 66, 1466-1664.
  • Tarley, C. R. T., Silveira, G., dos Santos, W. N. L., Matos, G. D., da Silva, E. G. P., Bezerra, M. A., Miro, M., and Ferreira, S. L. C. (2009). “Chemometric tools in electroanalytical chemistry: Methods for optimization based on factorial design and response surface methodology.” Microchemical Journal, 92, 58-67.
  • Tanhaei, B., Ayati, A., Lahtinen, M., and Sillanp , M. (2015). “Preparation and characterization of a novel chitosan/Al2O3/magnetite nanoparticles composite adsorbent for kinetic, thermodynamic and isotherm studies of methyl orange adsorption.” Chemical Engineering Journal, 259, 1-10.
  • Tanada, S., Kabayama, M., Kawasaki, N., Sakiyama, T., Nakamura, T., Araki, M., and Tamura, T. (2003). “Removal of phosphate by aluminum oxide hydroxide.” Journal of Colloid and interface Science, 257(1), 135-140.
  • Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., and Yang, Z. (2015). “Application of biochar for the removal of pollutants from aqueous solutions.” Chemosphere, 125, 70-85.
  • Tan, X., Liu, Y., Gu, Y., Hu, X., Zeng, G., Hu, X., Liu, S., Wang. X., Liu, S., and Li, J. (2016). “Biochar-based nano-composites for the decontamination of wastewater: A review.” Bioresource Technology, 212, 318-336.
  • Tan, I. A. W., Ahmad, A. L., and Hameed, B. H. (2008). “Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology.” Chemical Engineering Journal, 137, 462-470.
  • Tan, I. A. W., Abdullah, M. O., Lim, L. L. P., and Yeo, T. H. C. (2017). “Surface modification and characterization of coconut shell-based activated carbon subjected to acidic and alkaline treatments.” Journal of applied science and process engineering, 4(2), 186-194.
  • Sun, X. F., Imai, T., Sekine, M., Higuchi, T., Yamamoto, K., Kanno, A., and Nakaone, S. (2014). “Adsorption of phosphate using calcined Mg3-Fe layered double hydroxides in a fixed-bed column study.” Journal of Industrial and Engineering Chemistry, 20, 3623–3630.
  • Srividya, K., and Mohanty, K. (2009). “Biosorption of hexavalent chromium from aqueous solution by Catla catla scales: equilibrium and kinetics studies.” Chemical Engineering Journal, 155, 666–673.
  • Sohi, S. P. (2012). “Carbon storage with benefits.” Science, 338, 1034-1035.
  • Smith, V. H., (2003). “Eutrophication of freshwater and coastal marine ecosystems a global problem.” Environmental Science and Pollution Research, 10, 126-39.
  • Sips, R. (1948). “Combined form of Langmuir and Freundlich equations.” Journal of Chemical Physics, 16, 490-495.
  • Sikorski, P., Mo, F., Skj k-Br k, G., and Stokke, B. T. (2007). “Evidence for eggbox- compatible interactions in calcium-alginate gels from fiber X-ray diffraction.” Biomacromolecules, 8, 2098-2103.
  • Shrimali, M., and Singh, K. P. (2001). “New methods of nitrate removal from water.” Environmental Pollution, 112, 351–359.
  • Shackley, S., Carter, S., Knowles, T., Middelink, E., Haefele, S., Sohi, S., Cross, A., and Haszeldline, S. (2012). “Sustainable gasification-bochar system? A case-study of rice husk gasification in Cambodia, Part 1: Context, chemical properties, environmental and health and safety issues.” Energy Policy, 42, 49-58.
  • Santos, S. C. R., and Boaventura, R. A. R. (2008). “Adsorption modelling of textile dyes by sepiolite.” Applied Clay Science, 42(1-2), 137-145.
  • Samaraweera, A. M., Vidanarachchi, J. K., and Kurukulasuriiya, M. S. (2012). “Handbook of marine macroalgae: Biotechnology and applied phycology.” UK: John Wiley & Sons, Ltd.
  • Salman, J. M., Njoku, V. O., and Hameed, B. H. (2011). “Batch and fixed-bed adsorption of 2,4-dichlorophenoxyacetic acid onto oil palm frond activated carbon.” Chemical Engineering Journal, 174, 33-40.
  • Ross, A. B., Anastasakis, K., Kubacki, M., and Jones, J. M. (2009). “Investigation of the pyrolysis behavior of brown algae before and after pre-treatment using PYGC/ MS and TGA.” Journal of Analytical and Applied Pyrolysis, 85, 3-10.
  • Roh, H., Yu, M. R., Yakkala, K., Koduru, J. R., Yang, J. K., and Chang, Y. Y. (2015). “Removal studies of Cd(II) and explosive compounds using buffalo weed biocharalginate beads.” Journal of Industrial and Engineering Chemistry, 25, 226-233.
  • Roberts, D. A., and de Nys, R. (2016). “The effects of feedstock pre-treatment and pyrolysis temperature on the production of biochar from the green seaweed Ulva.” Journal of Environmental Management, 169, 253-260.
  • Roberts, D. A., Paul, N. A., Bird, M. I., and de Nys, R. (2015). “Biochar from commercially cultivated seaweed for soil amelioration.” Scientific Reports, 5, e9665.
  • Rizwan, M., Ail, S., Qayyum, M. F., Ibrahim, M., Zia-ur-Rehman, M., Abbas, T., and Ok, Y. S. (2016). “Mechanisms of biochar-mediated alleviation of toxicity of trace elements in plants: a critical review.” Environmental Science and Pollution Research, 23, 2230-2248.
  • Ren, J., Li, N., Li, L., An, J. K., Zhao, L., and Ren N. Q. (2015). “Granulation and ferric oxides loading enable biochar derived from cotton stalk to remove phosphate from water.” Bioresource Technology, 178, 119-125.
  • Randolph, P., Bansode, R. R., Hassan, O. A., Rehrah, Dj., Ravella, R., Reddy, M. R., Watts, D. W., Novak, J. M., and Ahmedna, M. (2017). “Effect of biochars produced from solid organic municipal waste on soil quality parameters.” Journal of Environmental Management, 192, 271-280.
  • Qiu, H., Lv, L., Pan, B., Zhang, Q., Zhang, W., and Zhang, Q. (2009). “Critical review in adsorption kinetic models.” Journal of Zhejiang University-Science A, 10(5), 716-724.
  • Qiao, D., Hu, B., Gan, D., Sun, Y., Ye, H., and Zeng, X. (2009). “Extraction optimized by using response surface methodology, purification and preliminary characterization of polysaccharides from Hyriopsis cumingii.” Carbohydrate Polymers, 76(3), 422-429.
  • Preetha, B., and Viruthagiri, T. (2007). “Batch and continuous biosorption of chromium(VI) by Rhizopus arrhizus.” Separation and Purification Technology, 57(1), 126–133.
  • Pratt, P., Parsons, S. A., Soares, A., and Martin, B. D. (2012). “Biologically and chemically mediated adsorption and precipitation of phosphorus from wastewater.” Current Opinion in Biotechnology, 23, 890–896.
  • Phillips, G. O., and Williams, P. A. (2009). “Handbook of hydrocolloids-second edition.” UK: Woodhead.
  • Peng, X., Ye, Y. Y., Wang, C. H., Zhou, H., and Sun, B. (2011). “Temperature- and duration-dependent rice straw-derived biochar: Characteristics and its effects on soil properties of an Ultisol in southern China.” Soil and Tillage Research, 112, 159-166.
  • Peng, X., Huang, D., Odoom-Wubah, T., Fu, D., Huang, J., and Qin, Q. (2014). “Adsorption of anionic and cationic dyes on ferromagnetic ordered mesoporous carbon from aqueous solution: Equilibrium, thermodynamic and kinetics.” Journal of Colloid and Interface Science, 430, 272-282.
  • Pawar, S. N., and Edgar, K. J. (2012). “Alginate derivatization: A review of chemistry, properties and applications.” Biomaterials, 33, 3279-3305.
  • Park, S. H., Cho, H. J., Ryu, C. K., and Park, Y. K. (2016). “Removal of copper(II) in aqueous solution using pyrolytic biochars derived from red macroalga Porphyra tenera.” Journal of Industrial and Engineering Chemistry, 36, 314–319.
  • Papageorguous, S. K., Kouvelos, E. P., Favva, E. P., Sapalidis, A. A., Romanos, G. E., and Katsaros, F. K. (2010). “Metal-carboxylate interactions in metal-alginate complexes studies with FTIR spectroscopy.” Carbohydrate Research, 345, 469-473.
  • Ozt rk, N., and Bektas, T. E. (2004). “Nitrate removal from aqueous solution by adsorption onto various materials.” Journal of Hazardous Materials, 112, 155–162.
  • Oliveira, M., and Machado, A. V. (2013). “The role of phosphorus on eutrophication: a historical review and future perspectives.” Environmental technology reviews, 2(1), 117-127.
  • Oladipo, A. A., and Gazi, M. (2014). “Enhanced removal of crystal violet by low cost alginate/acid activated bentonite composite beads: optimization and modelling using non-linear regression technique.” Journal of Water Process Engineering, 2, 43– 52.
  • Okewale, A. O., Igbokw, P. K., and Babayemi, K. A. (2015). “Design of pilot plant packed column for the dehydration of water from ethanol-water mixtures.” Advances in Chemical Engineering and Science, 5, 152–157.
  • Nur, T. (2014). “Nitrate, phosphate and fluoride removal from water using adsorption process.” (Ph.D. dissertation) University of Technology, Sydney, New South Wales, Australia.
  • Noordin, M. Y., Venkatesh, V. C., Sharif, S., Elting, S., and Abdullah, A. (2004). “Application of response surface methodology in describing the performance of coated carbide tolls when truning AISI 1045 steel.” Journal of Materials Processing Technology, 145, 46-58.
  • Nollet, H,, Roels, M., Lutgen, P., Van der Meeren, P., and Verstraete, W. (2003). “Removal of PCBs from wastewater using fly ash.” Chemosphere, 53, 655-665.
  • Nigussie, A., Kissi, E., Misganaw, M., and Ambaw, G. (2012). “Effect of biochar application on soil properties and nutrient uptake of lettuces (Lactuca sativa) grown in chro-mium polluted soils.” American-Eurasian journal of agricultural and environmental sciences, 12(3), 369–376.
  • Nguyen, T. A. H,, Ngo, H. H., Guo, W. S., Pham, T. Q., Li, F. M., Nguyen, T. V., and Bui, X. T. (2015). “Adsorption of phosphate from aqueous solutions and sewage using zirconium loaded okara (ZLO): Fixed-bed column study.” Science of the Total Environment, 523, 40-49.
  • Nguyen, H. T. A., Ngo, H. H., Guo, W., and Nguyen, V. T. (2012). “Phosphorous removal from aqueous solution by agricultural by-products: A critical review.” Journal of Water Sustainability, 2(3), 193-207.
  • Nanda, S., Dalai, A. K., Berruti, F., and Kozinski, J. A. (2016). “Biochar as an exceptional bioresource for energy, agronomy, carbon sequestration, activated carbon and specialty materials.” Waste and Biomass Valorization, 7, 201-236.
  • Nair, A. T., Makwana, A. R., and Ahammed, M. M. (2014). “The use of response surface methodology for modelling and analysis of water and wastewater treatment processes: a review.” Water Science and Technology, 69(3), 464-478.
  • Myers, R. H., Montgomery, D. C., and Andersion-Cook., C. M (2015). “Response surface methodology: process and product optimization using designed experiments.” UK: John Wiley & Sons, Ltd.
  • Mullins, G. (2009). “Phosphorus, agriculture, and the environment.” Virginia Polytechnic Institute, Virginia Cooperative Extension.
  • Mui, E. L. K., Cheung, W. H., and Mkay, G. (2010). “Tyre char preparation from waste tyre rubber for dye removal from effluents.” Journal of Hazardous Materials, 175, 151-158.
  • Mu iz, G., Fierro, V., Celzard, A., Furdin, G., Gonzalez-S nchez, G., and Ballinas, M. L. (2009). “Synthesis, characterization and performance in arsenic removal of irondoped activated carbons prepared by impregnation with Fe(III) and Fe(II).” Journal of Hazardous Materials, 165, 893-902
  • Msuya, F. E., Shalli, M. S., Sullivan, K., Crawford, B., Tobey, J and Mnochi, A. J. (2007). “A comparative economic analysis of two seaweed farming methods in Tanzania.” The Sustainable Coastal Communities and Ecosystems Program, Coastal Resources Center, University of Rhode Island and the Western Indian Ocean Marine Science Association.
  • Mouedhen, G., Feki, M., de Petris Wery, M., and Ayedi, H. F. (2008). “Behavior of aluminum electrodes in electrocoagulation process.” Journal of Hazardous Materials, 150, 124-135.
  • Montgomery, D. C. (2001). “Design and analysis of experiments.” UK: John Wiley & Sons, Ltd.
  • Mohan, D., Sarswa A., Ok, Y. S., and Pittman, C. U. (2014). “Organic and inorganic contaminants removal from water with biochar, a renewable, low cost and sustainable adsorbent – A critical review.” Bioresource Technology, 160, 191-202.
  • Mohan, D., Rajput, S., Singh, V. K., Steele, P. H., and Pittman, C. U. (2011). “Modeling and evaluation of chromium remediation from water using low cost biochar, a green adsorbent.” Journal of Hazardous Materials, 188, 319-333.
  • Mitsika, E. E., Christophoridis, C., and Fytianos, K. (2013). “Fenton and Fenton-like oxidation of pesticide acetamiprid in water samples: Kinetic study of the degradation and optimization using response surface methodology.” Chemosphere, 93, 1818-1825.
  • Michalekova-Richveisova, B., Fristak, V., Pipiska, M., Duriska, L., Moreno-Jimenez, E., and Soja, G. (2017). “Iron-impregnated biochars as effective phosphate sorption materials.” Environmental science and Pollution Research, 24, 463-475.
  • Maran, J. P., Manikandan, S., Thirugnanasambandham, K., Nivetha, C. V., and Dinesh, R. (2013). “Box-Behnken design based statistical modeling for ultrasoundassisted extraction of corn silk polysaccharide.” Carbohydrate Polymers, 92, 604-611.
  • Mahmoodi, N. M., Hayati, B., Arami, M., and Hahrami, H. (2011). “Preparation, characterization and dye adsorption properties of biocompatible composite (alginate/titania nanoparticle).” Desalination, 275, 93-101.
  • Ma, Z., Li, Q., Yue, Q., Gao, B., Li, W., Xu, X., and Zhong, Q. (2011). “Adsorption removal of ammonium and phosphate from water by fertilizer controlled release agent prepared from wheat straw.” Chemical Engineering Journal, 171, 1209-1217.
  • Lǚ, J., Liu, H., Liu, R., Zhao, X., Sun, L., and Qu, J. (2013). “Adsorptive removal of phosphate by nanostructured Fe–Al–Mn trimetal oxide adsorbent.” Powder Technology, 233, 146–154.
  • Luo, X., Yuan, J., Liu, Y., Liu, C., Zhu, X., Dai, X., Ma, Z., and Wang, F. (2017). “Improved solid-phase synthesis of phosphorylated cellulose microsphere adsorbents for highly effective Pb2+ removal from water: Batch and fixed-bed column performance and adsorption mechanism.” ACS Sustainable Chemistry and Engineering, 5, 5108- 5117.
  • Lua, A. C., Lau, F. Y., and Guo, J. (2006). “Influence of pyrolysis conditions on pore development of oil-palm-shell activated carbons.” Journal of Analytical and Applied Pyrolysis, 76, 96-102.
  • Lone, A. H., Najar, G. R., Gaine, M. A., Sofi, J. A., and Ali, T. (2015). “Biochar for sustainable soil health: A review of prospects and concerns.” Pedosphere, 25(5), 639- 653.
  • Loganathan, P., Vigneswaran, S., Kandasamy, J., and Naidu, R. (2013). “Defluoridation of drinkuing water using adsorption processes.” Journal of Hazardous Materials, 248-249, 1-19.
  • Loganathan, P., Vigneswaran, S., Kandasamy, J., and Bolan, N. S. (2014). “Removal and recovery of phosphate from water using sorption.” Critical Reviews in Environmental Science and Technology, 44, 847-907.
  • Lodeiro, P., Herrero, R., and de Vicente, M. E. S. (2006). “The use of protonated Sargassum muticum as biosorbent for cadmium removal in a fixed-bed column.” Journal of Hazardous Materials B, 137, 244-253.
  • Liu, Z., and Zhang, F. S. (2009). “Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass”. Journal of Hazardous Materials, 167, 933-939.
  • Liu, Z., Zhang, F. S., and Wu, J. (2010). “Characterization and application of chars produced from pinewood pyrolysis and hydrothermal treatment.” Fuel, 89, 510-514.
  • Liu, Z., Quek, A., Hoekman, S. K., and balasubramanian, R. (2013a). “Production of solid biochar fuel from waste biomass by hydrothermal carbonization.” Fuel, 103, 943-946.
  • Liu, X., and Zhang, L. (2015). “Removal of phosphate anions using the modified chitosan beads: Adsorption kinetic, isotherm and mechanism studies.” Powder Technology, 277, 112-119.
  • Liu, S., Tan, X., Liu, Y., Gu, Y., Zeng, G., Hu, X., Wang, H., Zhou, L., Jiang, L., and Zhao, B. (2016). “Production of biochars from Ca impregnated ramie biomass (Boehmeria nivea (L.) Gaud.) and their phosphate removal potential.” Royal Society of Chemistry, 6, 5871-5880.
  • Liu, J., Zhou, Q., Chen, J., Zhang, L., and Chang, N. (2013b). “Phosphate adsorption on hydroxyl-iron-lanthanum doped activated carbon fiber.” Chemical Engineering Journal, 215-216, 859-867.
  • Li, Y., Liu, F., Xia, B., Du, Q., Zhang, P., Wang, D., Wang, Z., and Xia, Y. (2010). “Removal of copper from aqueous solution by carbon nanotube/calcium alginate composites.” Journal of Hazardous Materials, 177, 876-880.
  • Li, R., Wang, J. J., Zhou, B., Awasthi, M. K., Ali, A., Zhang, Z., Lahori, A. H., and Mahar, A. (2016). “Recovery of phosphate from aqueous solution by magnesium oxide decorated magnetic biochar and its potential as phosphate-based fertilizer substitute.” Bioresource Technology, 215, 209-214.
  • Li, D., Lv, C., Liu, L., Xia, Y., She, X., Guo, S., and Yang, D. (2015). “Egg-Box structure in cobalt alginate: A new approach to multifunctional hierarchical mesoporous N‑doped carbon nanofibers for efficient catalysis and energy storage.” ACS central science, 1(5), 261-269.
  • Lehmann, J., and Joseph, S. (2015). “Biochar for environmental management: science, technology and implementation.” London and New York: Routledge (Taylor & Francis Group).
  • Lehmann, J. (2007). “A handful of carbon.” Nature, 447, 143-144.
  • Larkum, A. W. D., Ross, I., J., Kruse, O., and Hankamer, B (2012). “Selection, breeding and engineering of microalgae for bioenergy and biofuel production.” Trends Biotechnol, 30(4), 198-205.
  • Langmuir, I., (1916). “The constitution and fundamental properties of solids and liquids.” Journal of the American Chemical Society, 38(11), 2221-2295.
  • Lalley, J., Han, C., Li, X., Dionysiou, D. D., and Nadagouda, M. N. (2016). “Phosphate adsorption using modified iron oxide-based sorbents in lake water: Kinetics, equilibrium, and column tests.” Chemical Engineering Journal, 284, 1386-1396.
  • Laird, D. A., Fleming, P., Davis, D. D., Horton, R., Wang, B., and Karlen, D. L. (2010). “Impact of biochar amendments on the quality of a typical Midwestern agricultural soil.” Geoderma, 158, 443-449.
  • Lagergren, S. (1898). “Zur theorie der sogenannten adsorption geloster stoffe.” Kungliga Svenska Vetenskapsakademiens, 24, 1-39.
  • Kushwaha, J. P., Srivastava, V. C., and Mall, I. D. (2010). “Organics removal from dairy wastewater by electrochemical treatment and residue disposal.” Separation and Purification Technology, 76(2), 198-205.
  • Kunda, S., and Gupta, A. K. (2006). “Arsenic adsorption onto iron oxide-coated cement (IOCC): regression analysis of equilibrium data with several isotherm models and their optimization.” Chemical Engineering Journal, 122, 93-106.
  • Kumar, P., Sudha, S., Chand, S., and Srivastava, V. C. (2010). “Phosphate removal from aqueous solution using coir-pith activated carbon.” Separation Science and Technology, 45, 1463-1470.
  • Kumar, M., Ponselvan, F. I. A., Malviy, J. R., Srivastava, V. C., and Mall, I. D. (2009). “Treatment of bio-digester effluent by electrocoagulation using iron electrodes.” Journal of Hazardous Materials, 165, 345-352.
  • Kookana, R. S., Naidu, R., Barry, D. A., Tran, Y. T., and Bajraacharya, K. (1999). “Sorption-desorption equilibria and dynamics of cadmium during transport in soil.” In Selim, H. M., and Iskander, I. K. (Eds.), Fate and transport of heavy metals in the vadose zone (pp. 59–90). Washington, DC: Lewis.
  • Kim, T. Y., Jin, H. J., Park, S. S., Kim, S. J., and Cho, S. Y. (2008). “Adsorption equilibrium of copper ion and phenol by powdered activated carbon, alginate bead and alginate-activated carbon bead.” Journal of Industrial and Engineering Chemistry, 14, 714–719.
  • Kim, S. K., and Chojnacka, K. (2015). “Marine algae extracts: Processes, products, and applications.” UK: John Wiley & Sons, Ltd.
  • Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T.G., and Labbe, N. (2011). “Surface functionality and carbon structures in lignocellulosicderived biochars produced by fast pyrolysis.” Energy Fuels, 25, 4693-4703.
  • Kim, B. S., Lee, H. W., Park, S. H., Baek, K., Jeon, J. K., Cho, H. J., Jung, S. C., Kim, S. C., and Park, Y. K. (2016). “Removal of Cu2+ by biochars derived from green macroalgae.” Environmental Science and Pollution Research, 23, 985–994.
  • Khurl, A. I., and Mukhopadhyay, S. (2010). “Response surface methodology.” WIREs computational statistics, 2, 128-149.
  • Keiluweit, M., Nico, P. S., Johnson, M. G., and Kleber, M. (2010). “Dynamic molecular structure of plant biomass-derived black carbon (biochar).” Environmental Science and Technology, 44, 1247-1253.
  • Karaosmanoglu, F., Isigigur-Ergudenler, A., and Sever, A. (2000). “Biochar from the straw-stalk of rapeseed plant.” Energy and Fuels, 14, 336-339.
  • Kannan, S. (2014). “FT-IR and EDS analysis of the seaweeds Sargassum wightii (brown algae) and Gracilaria corticata (red algae).” International Journal of Current Microbiology and Applied Sciences, 3, 341–351.
  • Jung, K. W., and Ahn, K. H. (2016). “Fabrication of porosity-enhanced MgO/biochar for removal of phosphate from aqueous solution: application of a novel combined electrochemical modification method.” Bioresource Technology, 200, 1029-1032.
  • Jung, K. W., Kim, K. P., Jeong, T. U., and Ahn, K. H. (2016a). “Influence of pyrolysis temperature on characteristics and phosphate adsorption capability of biochar derived from waste-marine macroalgae (Undaria pinnatifida roots).” Bioresource Technology, 200, 1024-1028.
  • Jung, K. W., Jeong, T. U., Hwang, M. J., Kim, K. P., and Ahn, K. H. (2015b). “Phosphate adsorption ability of biochar/Mg-Al assembled nanocomposites prepared by aluminum-electrode based electro-assisted modification method with MgCl2 as electrolyte.” Bioresource Technology, 198, 603-610.
  • Jung, K. W., Hwang, M. J., Jeong, T. U., and Ahn, K. H. (2015a). “A novel approach for preparation of modified-biochar derived from marine macroalgae: Dual propose electro-modification for improvement of surface area and metal impregnation.” Bioresource Technology, 191, 342-345.
  • Jung, K. W., Chau, D. M., Choi, B. H., and Ahn, K. H. (2017). “Direct application of sodium alginate solution via dripping technique for effective copper removal and recovery from aqueous solution.” Environmental Progress and Sustainable Energy, 36(2), 489-493.
  • Jung, K. A., Lim, S. R., Kim, Y., and Park, J. M. (2012). “Potentials of macroalgae as feedstocks for biorefinery.” Chemosphere, 134, 232-240.
  • Jeppu, G. P., and Clement, T. P. (2012). “A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects.” Journal of Contaminant Hydrology, 129, 46-53.
  • Jain, M., Garg, V. K., and Kadirvelu, K. (2013). “Cadmium(II) sorption and desorption in a fixed bed column using sunflower waste carbon calcium-alginate beads.” Bioresource Technology, 129, 242-248.
  • Inyang, M., and Dickenson, E. (2015). “The potential role of biochar in the removal of organic and microbial contaminants from potable and reuse water: A review.” Bioresoure Technology, 135, 182-190.
  • Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., and Cao, X. (2016). “A review of biochar as a lowcost adsorbent for aqueous heavy metal removal.” Critical Reviews in Environmental Science and Technology, 46(4), 406-433.
  • Imeson, A. (2010). “Food stabilizers, thickeners and gelling agents.” UK: John Wiley & Sons, Ltd.
  • Huang, W., Zhang, Y., and Li, D. (2017). “Adsorptive removal of phosphate from water using mesoporous materials: A review.” Journal of Environmental Management, 193, 470-482.
  • Howarth, R., Swaney, D. P., Butler, T. J., and Marino, R. (2000). “Climatic control on eutrophication of the Hudson River estuary.” Ecosystem, 3(2), 210-215.
  • Holt, P. K., Barton, G. W., Wark, M., and Mitchell, C. A. (2002). “A quantitative comparison between chemical dosing and electrocoagulation.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 211(2-3), 233-248.
  • Ho, Y. S., Ng, J. C. Y., and McKay, G. (2000). “Kinetics of pollutant sorption by biosorbents: review.” Separation and Purification Methods, 29, 189-232.
  • Ho, Y. S. (2006). “Review of second-order models for adsorption system.” Journal of Hazardous Materials B, 136, 681-689.
  • Hanger, M., Hallman, S., Jauhiainen, L., Kemppainen, R., R m , S., Tiilikkala, K., and Set l a, H. (2015). “Birch (Betula spp.) wood biochar is a potential soil amendment to reduce glyphosate leaching in agricultural soils.” Journal of Environmental Management, 164, 46-52.
  • Han, R., Wang, Y., Zhao, X., Wang, Y., Xie, F., Cheng, J., and Tang, M. (2009). “Adsorption of methylene blue by phoenix tree leaf powder in a fixed-bed column: experiments and prediction of breakthrough curves.” Desalination, 245, 284–297.
  • Han, R., Wang, Y., Yu, W., Zou, W., Shi, J., and Liu, H. (2007). “Biosorption of methylene blue from aqueous solution by rice husk in a fixed-bed column.” Journal of Hazardous Materials, 141(3), 713–718.
  • Hale, S. E., Alling, V., Martinsen, V., Mulder, J., Breedveld, G. D., and Cornelissen, G. (2013). “The sorption and desorption of phosphate-P, ammonium-N and nitrate-N in cacao shell and corn cob biochars.” Chemosphere, 91, 1612–1619.
  • Gunes, A., Inal, A., Taskin, M. B., Sahin, O., Kaya, E. C., and Atakol, A. (2014). “Effect of phosphorus-enriched biochar and poultry manure on growth and mineral composition of lettuce (Lactuca sativa L. cv) grown in alkaline soil.” Soil Use and Management, 30, 182-188.
  • Guan, X. H., Chen, G. H., and Shang, C. (2007). “Adsorption behavior of condensed phosphate on aluminum hydroxide.” Journal of Environmental Sciences, 19, 312-318.
  • Gong, J. L., Zhang, Y. L., Jiang, Y., Zeng, G. M., Cui, Z. H., Liu, K., Deng, C. H., Niu, Q. Y., Deng, J. H., and Huan, S. Y. (2015). “Continuous adsorption of Pb(II) and methylene blue by engineered graphite oxide coated sand in fixed-bed column.” Applied Surface Science, 330, 148-157.
  • Gok, C., Turkozu, D. A., and Aytas, S. (2011). “Removal of Th(IV) ions from aqueous solution using bi-functionalized algae–yeast biosorbent.” Journal of Radioanalytical and Nuclear Chemistry, 287, 533–541.
  • Glaser, B., Lehmann, J., and Zech, W. (2002). “Ameliorating physical and chemical properties of highly weathered soils in the tropics with charcoal-a review.” Biology and Fertility of Soils, 35, 219-230.
  • Gerente, C., Lee, V. K. C., Le Cloirec, P., and McKay, G. (2007). “Application of chitosan for the removal of metals from wastewaters by adsorption-mechanisms and models review.” Critical Reviews in Environmental Science and Technology, 37, 41- 127.
  • George, M., and Abraham, T. E. (2006). “Polyionic hydrocolloids for the intestinal delivery of protein drugs: Alginate and chitosan - a review.” Journal of Controlled Release, 114, 1-14.
  • Garc a-S nchez, J. J., Solache-R os, M., Alarc n-Herrera, M. T., and Mart nez- Miranda, V. (2016). “Removal of fluoride from well water by modified iron oxides in a column system.” Desalination and Water Treatment, 57, 2125-2133.
  • Freundlich, H. M. F (1906). “Over the adsorption in solution.” Journal of Physical Chemistry, 57, 385-470.
  • Foroughi-dahr, M., Esmaieli, M., Abolghasemi, H., Shojamoradi, A., and Pouya, E. S. (2016). “Continuous adsorption study of congo red using tea waste in a fixed-bed column.” Desalination and Water Treatment, 57, 8437-8446.
  • Foo, K. Y., and Hameed, B. H. (2010). “Insights into the modeling of adsorption isotherm systems.” Chemical Engineering Journal, 156, 2-10.
  • Filo, N., Escudero, C., Poch, J., and Villaescusa, I. (2006). “Preliminary studies on Cr(VI) removal from aqueous solution using grape stalk wastes encapsulated in calcium alginate beads in a packed bed up-flow column.” Reactive and Functional Polymers, 66(8), 795-807.
  • Field, J. L., Keske, C. M. H., Birch, G. L., Defoort, M. W., and Cotrufo, M. F. (2013). “Distributed biochar and bioenergy coproduction: a regionally specific case study of environmental benefits and economic impacts.” Global Change Biology Bioenergy, 5(2), 177-191.
  • Ferreira, S. L. C., Burns, R. E., Ferreira, H. S., Matos, G. D., David, J. M., Brandao, G. C., da Silva, E. G. P., Portugal , L. A., dos Reis, P. S., Souza. A. S., and dos Santos, W. N. L. (2007). “Box-Behnken design: An alternative for the optimization of analytical methods.” Analytica Chimica acta, 597, 179-186.
  • Fang, C., Zhang, T., Li, P., Jiang, R. F., and Wang, Y. C. (2014). “Application of magnesium modified corn biochar for phosphorus removal and recovery from swine wastewater.” International Journal of Environmental Research and Public Health, 11, 9217-9237.
  • Fang, C., Zhang, T., Li, P., Jiang, R. F., Wu, S., Nie, H., and Wang, Y. C. (2015). “Phosphorus recovery from biogas fermentation liquid by Ca-Mg loaded biochar.” Journal of Environmental Science, 29, 106-114.
  • FAO yearbook. (2016). “Fishery and aquaculture statistics.” Rome.
  • European Commission. (2009). Guidance document No 23: Common implementation strategy for the water framework directive (2000/60/EC).
  • Ender, A., Hanley, K., Whitman, T., Joseph, S., and Lehmann, J. (2012). “Characterization of biochars to evaluate recalcitrance and agronomic performance.” Bioresoure Technology, 114, 644-653.
  • Elzinga, E. J., Huang, J. H., Chorover, J., and Kretzschmar, R. (2012). “ATR-FTIR spectroscopy study of the influence of pH and contact time on the adhesion of Shewanella putrefaciens bacterial cells to the surface of hematite.” Environmental Science and Technology, 46, 12848-12855.
  • Dwivedi, C. P., Sahu, J. N., Mohanty, C. R., Mohan, B. R., and Meikap, B. C. (2008). “Column performance of granular activated carbon packed bed for Pb(II) removal.” Journal of Hazardous Materials, 156, 596–603.
  • Doğan, M., Alkan, M., T rkyilmaz, A., and zdemir, Y. (2004). “Kinetics and mechanism of removal of methylene blue by adsorption onto perlite.” Journal of Hazardous Materials B, 109, 141–148.
  • Dodds, W. K., Bouska, W. W., Eitzmann, J. L., Pilger, T. J., Pitts, K. L., Riley, A. J., Schloesser, J. T., and Thornbrugh, D. J. (2009). “Eutrophication of U.S. Freshwaters: Analysis of potential economic damages.” Environmental Science and Technology, 43(1), 12-19.
  • Do, X. H., and Lee, B. K. (2013). “Removal of Pb2+ using a biochar-alginate capsule in aqueous solution and capsule regeneration.” Journal of Environmental Management, 131, 375–382.
  • De la Rosa, J., Paneque, M., Miller, A. Z., and Knicker, H. (2014). “Relating physical and chemical properties of four different biochars and their application rate to biomass production of Lolium perenne on a Calcic Cambisol during a pot experiment of 79 days.” Science of the Total Environment, 499, 175-184.
  • De Gisi, S., Lofrano, G., Grass, M., and Notarnicola, M. (2016). “Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review.” Sustainable Materials and Technologies, 9, 10-40.
  • Dabrowski, B. (2001). “Adsorption-from theory to practice.” Advances in Colloid and Interface Science, 93, 135-224.
  • Cui, X., Dai, X., Khan, K. Y., Li, T., Yang, X., and He, Z. (2016). “Removal of phosphate from aqueous solution using magnesium alginate/chitosan modified biochar microspheres derived from Thalia dealbata.” Bioresource Technology, 218, 1123-1132.
  • Chun, Y., Sheng, G., Chiou, C. T., and Xing, B. (2004). “Compositions and sorptive properties of crop residue-derived chars.” Environmental science and Technology, 38(17), 4649-4655.
  • Chris, P. M., and William, P., (2002). “Phosphorus in rivers – ecology and management.” Science of the Total Environment, 282–283, 25–47.
  • Chowdhury, S., Mishra, R., Saha, P., and Kushwaha, P. (2011). “Adsorption thermodynamics, kinetics and isosteric heat of adsorption of malachite green onto chemically modified rice husk.” Desalination, 265, 159-168.
  • Chowdhury, S., Mishra, R., Kushwaha, P., and Saha, P. (2012). “Removal of safranin form aqueous solutions by NaOH-treated rice husk: thermodynamics, kinetics and isosteric heat of adsorption.” Asia-Pacific Journal of Chemical Engineering, 7, 236- 249.
  • Cheung, W. H., Szeto, Y. S., and McKay, G. (2007). “Intraparticle diffusion processes during acid dye adsorption onto chitosan.” Bioresource Technology, 98, 2897-2904.
  • Chen, X., Chen, G., and Yue, P. L. (2000). “Separation of pollutants from restaurant wastewater by electrocoagulation.” Separation and Purification Technology, 19, 65-76.
  • Chen, S., Yue, Q., Gao, B., Li, Q., Xu, X., and Fu, K. (2012). “Adsorption of hexavalent chromium from aqueous solution by modified corn stalk: A fixed-bed column study.” Bioresource Technology, 113, 114–120.
  • Chen, D., Zhou, J., and Zhang, Q. (2014). “Effects of heating rate on slow pyrolysis behavior, kinetic parameters and products properties of moss bamboo.” Bioresource Technology, 169, 313-319.
  • Chen, B., and Chen, Z. (2009). “Sorption of naphthalene and 1-naphthol by biochars of orange peels with different pyrolytic temperatures.” Chemosphere, 76, 127-133.
  • Chen, B., Zhou, D., and Zhu, L. (2008). “Transitional adsorption and partition of nonpolar and polar aromatic contaminants by biochars of pine needles with different pyrolytic temperature.” Environmental Science and Technology, 42, 5137-5143.
  • Chen, B., Chen, Z., and Lu, S. (2011). “A novel magnetic biochar efficiently sorbs organic pollutants and phosphate.” Bioresource Technology, 102, 716-723.
  • Chattoraj, S., Mondal, N. K., Das, B., Roy, P., and Sadhukhan, B. (2014). “Carbaryl removal from aqueous solution by Lemna major biomass using response surface methodology and artificial neural network.” Journal of Environmental Chemical Engineering, 2(4), 1920-1928.
  • Chan, K. Y., Van Zwieten, L., Meszaros, I., Downie, A., and Joseph, S. (2008). “Using poultry litter biochars as soil amendments.” Soil Research, 46(5), 437-444.
  • Carter, S., Shackley, S., Sohi, S., Suy, T. B., and Haefele, S. (2013). “The impact of biochar application on soil properties and plant growth of pot grown lettuce (Lactuca sativa) and cabbage (Brassica chinensis).” Agrnomy, 3, 404-418.
  • Cao, X., and Harris, W. (2010). “Properties of dairy-manure-derived biochar pertinent to its potential use in remediation.” Bioresource Technology, 101, 5222-5228.
  • Cantrell, K. B., Hunt, P. G., Uchimiya, M., Novak, J. M., and Ro, K. S. (2012). “Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar.” Bioresource Technology, 107, 419-428.
  • Calero, M., Ronda, A., Perez, A., Yanez, A., Trujillo, M. C., and Martin-Lara, M. A. (2016). “The scale-up of Cr3+ biosorption onto olive stone in a fixed bed column.” Desalination and Water Treatment, 57, 25140–25152.
  • Bulgariu, D., and Bulgariu, L. (2013). “Sorption of Pb(Ⅱ) onto a mixture of algae waste biomass and anion exchanger resin in a packed-bed column.” Bioresource Technology, 129, 374-380.
  • Bu, R., Chen, F., Li, J., Li, W., and Yang, F. (2016). “Adsorption capability for anionic dyes on 2-hydroxyethylammonium acetate-intercalated layered double hydroxide.” Colloids and Surfaces A, 511, 312–319.
  • Bu, H., Kjoniksen, A., Knudsen, K. D., and Nystrom, B. (2004). “Rheological and structural properties of aqueous alginate during gelation via the Ugi multicomponent condensation reaction.” Biomacromolecules, 5, 1470-1479.
  • Brennan, A., Jim nez, E. M., Alburquerque, J. A., Knapp, C. W., and Switzer, C. (2014). “Effects of biochar and activated carbon amendment on maize growth and the uptake and measured availability of polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements.” Environmental Pollution, 193, 79-87.
  • Braccini, I., and Perez, S. (2001). “Molecular basis of Ca2+-induced gelation in alginates and pectins: The egg-box model revisited.” Biomacromolecules, 2, 1089-1096.
  • Bold, H. C., and Wynne, M. J., (1985). “Introduction to the Algae: Structure and Reproduction.” 2nd edition. Prentice-Hall Inc., Englewood Cliffs, NJ, pp. 1–33.
  • Bohart, G. S., and Adams, E. Q, (1920). “Some aspects of the behavior of charcoal with respect to chlorine.” Journal of the American Chemical Society, 42, 523-544.
  • Biswas, B. K., Inoue, K., Ghimire, K. N., Ohto, S., Harada, H., Ohto, K., and Kawakita, H. (2007). “The adsorption of phosphate from an aquatic environment using metal-loaded orange waste.” Journal of Colloid and Interface Science, 312, 214-223.
  • Biswas, B. K., Inoue, K., Ghimire, K. N., Harada, H., Ohto, K., and Kawakita, H. (2008). “Removal and recovery of phosphorus from water by means of adsorption onto orange waste gel loaded with zirconium.” Bioresource Technology, 99, 8685-8690.
  • Bird, M. I., Wurster, C. R., de Paula Silva, P. H., Paul, N., and de Nys, R. (2012). “Algal biochar: effects and applications.” GCB Bioenergy, 4, 61-69.
  • Bird, M. I., Wurster, C. M., de Paula Silva, P. H., Bass, A. M., and de Nys, R. (2011). “Algal biochar-production and properties.” Bioresource Technology, 102, 1886-1891.
  • Bhatnagar, A., and Silanp , M. (2010). “Utilization of agro-industrial and municipal waste materials as potential adsorbents for water treatment-A review.” Chemical Engineering Journal, 157, 277-296.
  • Bhatnagar, A., Vilar, V. J. P., Botelho, C. M. S., and Boaventura, R. A. R. (2011). “A review of the use of red mud as adsorbent for the removal of toxic pollutants from water and wastewater.” Environmental Technology, 32(3), 231-249.
  • Bezerra, M. A., Santelli, R. E., Oliveira, E. P., Villar, L. S., and Escaleira, L. A. (2008). “Response surface methodology (RSM) as a tool for optimization in analytical chemistry.” Talanta, 76, 965-977.
  • Benhouria, A., Islam, M. A., Zaghouane-Boudiaf, H., Boutahala, M., and Hameed, B. H. (2015). “Calcium alginate-bentonite-activated carbon composite beads as highly effective adsorbent for methylene blue.” Chemical Engineering Journal, 270, 621–630.
  • Bedin, K. C., Martins, A. C., Cazetta, A. L., Pezoti, O., and Almeida, V. C. (2016). “KOH-activated carbon prepared from sucrose spherical carbon: adsorption equilibrium, kinetic, and thermodynamic studies for Methylene Blue removal.” Chemical Engineering Journal, 286, 476-484.
  • Baskan, M. B., and Pala, A. (2010). “A statistical experiment design approach for arsenic removal by coagulation process using aluminum sulfate.” Desalination, 254(1- 3), 42-48.
  • Bas, D., and Boyaci, I. H. (2007). “Modeling and optimization Ⅰ: Usability of response surface methodology.” Journal of Food Engineering, 78, 836-845.
  • Baral, S. S., Das, N., Ramulu, T. S., Sahoo, S. K., Das, S. N., and Chaudhury, G. R. (2009). “Removal of Cr(VI) by thermally activated weed Salvinia cucullata in a fixedbed column.” Journal of Hazardous Materials, 161(2-3), 1427-1435.
  • Bakhtiari, N., and Azizian, S. (2015). “Adsorption of copper ion from aqueous solution by nanoporous MOF-5: a kinetic and equilibrium study.” Journal of Molecular Liquids, 206, 114-118.
  • Anirudhan, T. S., and Senan, P. (2011). “Adsorption of phosphate ions from water using a novel cellulose-based adsorbent.” Chemistry and Ecology, 27(2), 147–164.
  • Angin, D., K se, T. E., and Selengil, U. (2013). “Production and characterization of activated carbon prepared from safflower seed cake biochar and its ability to absorb reactive dyestuff.” Applied Surface Science, 280, 705-710
  • Angin, D. (2013) “Effect of pyrolysis temperature and heating rate on biochar obtained from pyrolysis of safflower seep press cake.” Bioresource Technology, 128, 593-597.
  • Anastasakis, K., Ross, A. B., and Jones, J. M. (2011) “Pyrolysis behavior of the main carbohydrates of brown macro-algae.” Fuel, 90, 598-607.
  • Al-Wabel, M. I., Al-Omran, A., El-Naggar, A. H., Nadeem, M., and Usman, A. R. A. (2013) “Pyrolysis temperature induced changes in characteristics and chemical composition of biochar produced from conocarpus wastes.” Bioresource Technology, 131, 374-379.
  • Aksu, Z., and Gonen, F. (2004) “Biosorption of phenol by immobilized activated sludge in a continuous packed bed: prediction of breakthrough curves.” Process Biochemistry, 39(5), 599-613.
  • Akratanakul, S., Boersma, L., and Klock, G. O. (1983) “Sorption processes in soils as influenced by pore water velocity: 2. experimental results.” Soil Science, 135(6), 331-341.
  • Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., and Ok, Y. S. (2014) “Biochar as a sorbent for contaminant management in soil and water: A review.” Chemosphere, 99, 19-33.
  • Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J. K., Yang, J. E., and Ok, Y. S. (2012) “Effects of pyrolysis temperature on soybean stover- and peanut shell-derived biochar properties and TCE adsorption in water.” Bioresource Technology, 118, 536- 544.
  • Ahmad, A. A., and Hameed, B. H. (2010). “Effect of preparation conditions of activated carbon from bamboo waste for real textile wastewater.” Journal of Hazardous Materials, 17, 487-493.
  • Agrafioti, E., Kalderis, D., and Diamadopoulos, E. (2014). “Ca and Fe modified biochars as adsorbents of arsenic and chromium in aqueous solutions.” Journal of Environmental Management, 146, 444-450.