연구동향 분석
박사

경량 금속의 통전소성에 관한 연구 = Study on the electroplasticity of lightweight metal

정용하 2018년

논문상세정보
인용/피인용
' 경량 금속의 통전소성에 관한 연구 = Study on the electroplasticity of lightweight metal' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • Electrically-assisted manufacturing (EAM)
  • Lightweight metal
  • aluminum alloy
  • electroplasticity
  • magnesium alloy
  • titanium alloy
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
174 0

0.0%

' 경량 금속의 통전소성에 관한 연구 = Study on the electroplasticity of lightweight metal' 의 참고문헌

  • Zimniak Z., and Radkiewicz G., “The Electroplastic Effect in the Cold-Drawing of Copper Wires for the Automotive Industry”, Archives of Civil and Mechanical Engineering, Vol. 8, pp. 173-179, 2008.
  • Zhang, D., To, S., Zhu, Y., Wang, H., and Tang, G., “Dynamic Electropulsing Induced Phase Transformations and Their Effects on Single Point Diamond Turning of AZ91 Alloy”, Journal of Surface Engineered Materials and Advanced Technology, Vol. 2, No. 1, pp. 16-21, 2012.
  • Zhang Z., Zhang H., Shi Y., Moser N., Ren H., Ehmann K.F., and Cao J., “Springback Reduction by Annealing for Incremental Sheet Forming”, Procedia Manufacturing, Vol. 5, pp. 696-706, 2016.
  • Zhang D., To S., Zhu Y., Wang H., and Tang G., “Dynamic Electropulsing Induced Phase Transformations and their Effects on Single Point Diamond Turning of AZ91 Alloy”, Journal of Surface Engineered Materials and Advanced Technology, Vol. 2, pp. 16-21, 2012.
  • Yu, W. P., Qin, R. S., and Wu, K. M., “The Effect of Hot-and Cold Rolling on the Electropulse-Induced Microstructure and Property Changes in Medium Carbon Low Alloy Steels”, Steel Research International, Vol. 84, pp. 1-7, 2012.
  • Yu W.P., Qin R.S., and Wu K.M., “The Effect of Hot and Cold Rolling on the Electropulse Induced Microstructure and Property Changes in Medium Carbon Low Alloy Steels”, Steel Research International, Vol. 84, pp. 443-449, 2013.
  • Yao L., Hong C., Yunqou G., and Xinbin H., “Effect of Electric Current Pulse on Superplasticity of Aluminum Alloy 7475”, Transactions of Nonferrous Metals Society of China, Vol. 6, No. 1, pp. 77–80, 1996.
  • Yao L., Chen H., Gu Y. Q., and Hu X. B., “Effect of Electric Current Pulse on Superplasticity of Aluminium Alloy 7475”, Transactions of Nonferrous Metals Society of China, Vol. 6, pp. 77-84, 1996.
  • Yao K.F., Wang J., Zheng M., Yu P., and Zhang H., “A Research on Electroplastic Effects in Wire-Drawing Process of an Austenitic Stainless Steel”, Scripta Materialia, Vol. 45, pp. 533- 539, 2001.
  • Yang H., Fan X., Sun Z, Guo L., and Zhan M., “Recent Developments in Plastic Forming Technology of Titanium Alloys”, Science China Technological Sciences, Vol. 54, No. 2, pp. 490–501, 2011.
  • Yanagimoto J., and Oyamada K., “Springback of High-Strength Steel after Hot and Warm Sheet Formings”, Cirp-Annals, Vol. 54, No. 1, pp. 213-216, 2005.
  • Wang S., “Effect of Electric Pulses on Drawability and Corrosion Property of AZ31 Magnesium Alloy”, Tsinghua University, Mater Thesis, 2009.
  • Wagoner R.H., and Li M., “Simulation of Springback: Through-Thickness Integration”, International Journal of Plasticity, Vol. 23, No. 3, pp. 345–360, 2007.
  • Troitskii, O., “Electromechanical Effect in Metals”, ZhETF Pisma Redaktsiiu, Vol. 10, pp. 18- 22, 1969.
  • Troitskii O.A., “Electromechanical Effect in Metals”, Pis’ma v Zhurnal Eksperimental’noi i Teoreticheskoi Fiziki, pp. 10:18–22, 1969.
  • Troitskii O. A., “Electromechanical Effect in Metals”, ZhETF Pisma Redaktsiiu, 1969, 10, 18.
  • Toros S., Ozturk F., and Kacar I., “Review of Warm Forming of Aluminum–Magnesium Alloys”, Journal of Materials Processing Technology, Vol. 207, pp. 1–12, 2008.
  • Thien N. T., Jeong Y.-H., Hong S.-T., Kim M.-J., Han H. N., and Lee M.-G., “Electrically Assisted Tensile Behavior of Complex Phase Ultra-High Strength Steel”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3(4), pp. 325-333, 2016.
  • Strunk Jr., and Matthew J., “Titanium: a Technical Guide 2nd Edition”, ASM International, 2000.
  • Song J.H., Huh H., and Kim S.H., “A Simulation-Based Design Parameter Study in the Stamping Process of an Automotive Member”, Journal of Material Processing Technology, Vol. 189, pp. 450–458, 2007.
  • Salandro, W.A., Jones, J.J., McNeal, T.A., Roth, J.T., Hong, S.-T., et al., “Formability of Al 5xxx Sheet Metals Using Pulsed Current for Various Heat Treatments”, Journal of Manufacturing Science and Engineering, Vol. 132, No. 5, pp. 51016, 2010.
  • Salandro, W., Khalifa, A., and Roth, J., “Tensile formability enhancement of Magnesium AZ31B-O Alloy Using Electrical Pulsing”, North American Manufacturing Research Institution of SME, Vol. 37, pp. 387-394, 2009.
  • Salandro, W. A., Bunget, C., and Mears, L., “Electroplastic Modeling of Bending Stainless Steel Sheet Metal Using Energy Methods”, Journal of Manufacturing Science and Engineering, Vol. 133, No. 4, pp. 041008, 2011.
  • Salandro W.A., and Roth J.T., “Formation of 5052 Aluminum Channels Using Electrically- Assisted Manufacturing (EAM)”, Proceedings of the ASME 2009 International Manufacturing Science and Engineering Conference, Vol. 2, pp. 599–608, 2009.
  • Salandro W.A., Khalifa A., and Roth J.T., “Tensile Formability Enhancement of Magnesium AZ31B-O Alloy Using Electrical Pulsing”, in: Trans. North American Manufacturing Research Institute of SME, Vol. 37, pp. 387-394, 2009.
  • Salandro W.A., Jones J.J., McNeal T.A., Roth J.T., Hong S.-T., and Smith M.T., “Formability of Al 5xxx Sheet Metals Using Pulsed Current for Various Heat Treatments”, Journal of Manufacturing Science and Engineering, Vol. 132, No.5, pp. 051016-1-11, 2010.
  • Salandro W.A., Bunget C., and Mears L., “Electroplastic Modeling of Bending Stainless Steel Sheet Metal Using Energy Methods”, Journal of Manufacturing Science and Engineering, Vol. 133, pp. 041008, 2011.
  • Roylance D., “The Dislocation Basis of Yield and Creep. Modules in Mechanics of Materials”, Available at http://ocw.mit.edu/courses/materials-science-and-engineering/3-11-mechanicsof-materials-fall-1999/modules/dn.pdf, 2001.
  • Roylance D., “Mechanical Properties of Materials”, Massachusetts Institute of Technology Publishing, USA, 2008, .
  • Roth, J., Loker, I., Mauck, D., Warner, M., Golovashchenko, S., et al., “Enhanced Formability of 5754 Aluminum Sheet Metal Using Electric Pulsing”, North American Manufacturing Research Institution of SME, Vol. 36, pp. 405-412, 2008.
  • Roth J.T., Loker I., Mauck D., Warner M., Golovashchenko S., and Krause A., “Enhanced Formability of 5754 Aluminum Sheet Metal Using Electric Pulsing”, in: Trans. North American Manufacturing Research Institute of SME, Vol. 36, pp. 405-412, 2008.
  • Ross, C.D., Kronenberger, T.J., and Roth, J.T., “Effect of DC on the Formability of Ti-6Al- 4V”, Journal of Engineering Materials and Technology, Vol. 131, No. 3, Paper No. 031004, 2009.
  • Ross, C.D., Irvin, D.B., and Roth, J.T., “Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals”, Journal of Engineering Materials and Technology, Vol. 129, No. 2, pp. 342-347, 2007.
  • Roh, J.-H., Seo, J.-J., Hong, S.-T., Kim, M.-J., Han, H.N., et al., “The Mechanical Behavior of 5052-H32 Aluminum Alloys under a Pulsed Electric Current”, International Journal of Plasticity, Vol. 58, pp. 84-99, 2014.
  • Roh J.-H., Seo J.-J., Hong S.-T., Kim M.-J., Han H.N., and Roth J.T., “The Mechanical Behavior of 5052-H32 Aluminum Alloys Under a Pulsed Electric Current”, International Journal of Plasticity, Vol. 58, pp. 84–99, 2014.
  • Perkins, T.A., Kronenberger, T.J., and Roth, J.T., “Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working”, Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 84-94, 2007.
  • Perkins T.A., Kronenberger T.J., and Roth J.T., “Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working”, Journal of Manufacturing Science and Engineering, Vol. 129, pp. 84-94, 2007.
  • Perkins T.A., Kronenberger T.J., and Roth J.T., “Metallic Forging Using Electrical Flow as an Alternative to Warm/Hot Working”, Journal of Manufacturing Science and Engineering Transactions of the ASME, Vol. 129, pp. 84–94, 2007.
  • McNeal, T.A., Beers, J.A., and Roth, J.T., “The Microstructural Effects on Magnesium Alloy AZ31B-O While Undergoing an Electrically-Assisted Manufacturing Process”, Proceeding of the ASME International Manufacturing Science and Engineering Conference, pp. 641-650, 2009.
  • Matsuoka, S., Hasegawa, K., and Tanaka, Y., “Newly-developed ultra-high tensile strength steels with excellent formability and weldability”, JFE Technical Report, Vol. 12, pp. 13-18, 2007.
  • Magargee, J., Morestin, F., and Cao, J., “Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation”, Journal of Engineering Materials and Technology, Vol. 135, No. 4, pp. 041003, 2013.
  • Magargee J., Morestin F., and Cao J., “Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation”, Journal of Engineering Materials and Technology, Vol. 135, pp. 041003-1–041003-10, 2013.
  • Magargee J., Morestin F., and Cao J., “Characterization of Flow Stress for Commercially Pure Titanium Subjected to Electrically Assisted Deformation”, Journal of Engineering Materials and Technology, Vol. 135, pp. 041003, 2013.
  • Magargee J., Fan R., and Cao J., “Analysis and Observations of Current Density Sensitivity and Thermally Activated Mechanical Behavior in Electrically-Assisted Deformation”, Journal of Manufacturing Science and Engineering, Vol. 135, pp. 061022, 2013.
  • Magargee J., Fan R., and Cao J., “Analysis and Observations of Current Density Sensitivity and Thermally Activated Mechanical Behavior in Electrically- Assisted”, Journal of Engineering Materials and Technology, Vol. 135, pp. 061022-1–061022-8, 2013.
  • Luo, M., Dunand, M., and Mohr, D., “Experiments and Modeling of Anisotropic Aluminum Extrusions under Multi-Axial Loading-Part II: Ductile Fracture”, International Journal of Plasticity, Vol. 32, pp.36-58, 2012.
  • Lingbeek R., Huetnik J., Ohnimus S., and Petzoldt M., “The Development of a Finite Elements Based Springback Compensation Tool for Sheet Metal Products”, Journal of Materials Processing Technology, Vol. 169, pp. 115–125, 2005.
  • Kinsey, B., Cullen, G., Jordan, A., and Mates, S., “Investigation of Electroplastic Effect at High Deformation Rates for 304SS and Ti- 6Al-4V”, CIRP Annals-Manufacturing Technology, Vol. 62, No. 1, pp. 279-282, 2013.
  • Kinsey B., Cullen G., Jordan A., and Mates S., “Investigation of Electroplastic Effect at High Deformation Rates for 304SS and Ti–6Al–4V”, CIRP Annals – Manufacturing Technology, Vol. 62, pp. 279-282, 2013.
  • Kim, M.-S., Vinh, N. T., Yu, H.-H., Hong, S.-T., Lee, H.-W., et al., “Effect of Electric Current Density on the Mechanical Property of Advanced High Strength Steels under Quasi- Static Tensile Loads”, International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 6, pp. 1207-1213, 2014.
  • Kim, M.-J., Lee, K., Oh, K.H., Choi, I.-S., Yu, H.-H., et al., “Electric Current-Induced Annealing during Uniaxial Tension of Aluminum Alloy”, Scripta Materialia, Vol. 75, pp. 58- 61, 2014.
  • Kim W., Yeom K.-H., Thien N.T., Hong S.-T., Min B.-K., Oh S.I., Kim M.-J., Han H.N., and Lee H.-W., “Electrically Assisted Blanking Using the Electroplasticity of Ultra-High Strength Metal Alloys”, CIRP Annals – Manufacturing Technology, Vol. 63, pp. 273-276, 2014.
  • Kim M.-S., Vinh N.T., Yu H.-H., Hong S.-T., Lee H.-W., Kim M.-J., Han H.N., and Roth J. T., “Effect of Electric Current Density on the Mechanical Property of Advanced High Strength Steels under Quasi-static Tensile Loads”, International Journal of Precision Engineering and Manufacturing, Vol. 15, pp. 1207-1213, 2014.
  • Kim M.-J., Lee K.H., Oh K.H., Choi I.-S., Yu H.-H., Hong S.-T., and Han H.N., “Electric Current-Induced Annealing During Uniaxial Tension of Aluminum Alloy”, Scripta Materialia, Vol. 75, pp. 58–61, 2014.
  • Kim M.-J., Lee K., Oh K.H., Choi I.-S., Yu H.-H., Hong S.-T., and Han H.N., “Electric Current-Induced Annealing during Uniaxial Tension of Aluminum Alloy”, Scripta Materialia, Vol. 75, pp. 58-61, 2014.
  • Jordan A., and Kinsey B.L., “Measurement of Strain Gradients and Forces During Electrically-Assisted Microbending”, Proceeding of the 7th International Conference on MicroManufacturing, pp. 254-258, 2012.
  • Jones, J.J. and Roth, J.T., “Effect on the Forgeability of Magnesium AZ31B-O When Continuous DC Electricity is Applied”, Proceeding of the ASME International Manufacturing Science and Engineering Conference, pp. 589-598, 2009.
  • Jones, J. J. and Mears, L., “Thermal Response Modeling of Sheet Metals during Electrically- Assisted Forming”, Journal of Manufacturing Science and Engineering, Vol. 135, No. 2, pp. 021011-5, 2013.
  • Jones J.J., Mears L., and Roth J.T., “Electrically-Assisted Forming of Magnesium AZ31: Effect of Current Magnitude and Deformation Rate on Forgeability”. Journal of Manufacturing Science and Engineering Transactions of the ASME, Vol. 134, pp. 034504-1– 034504-7, 2012.
  • Jeon C.-S., Hong S.-T., Kwon Y.-J., Cho H.-H., and Han H.N., “Material Properties of friction Stir Spot Welded Joints of Dissimilar Aluminum Alloys”, Transactions of Nonferrous Metals Society of China, Vol. 22, pp. s605–s613, 2012.
  • Hong, S.-T., and Weil, K. S., “Niobium-Clad 304L Stainless Steel PEMFC Bipolar Plate Material: Tensile and Bend Properties”, Journal of Power Sources, Vol. 168, No. 2, pp. 408- 417, 2007.
  • Hong S.-T., Jeong Y.-H., Chowdhury M.N., Chun D.-M., Kim M.-J., and Han H.N., “Feasibility of Electrically Assisted Progressive Forging of Aluminum 6061-T6 Alloy”, CIRP Annals - Manufacturing Technology, Vol. 64, pp. 277-280, 2015.
  • Hirsch J., “Aluminum in Innovative Light-Weight Car Design”, Materials Transactions, Vol. 52, No. 5, pp. 818-824, 2011.
  • Hirsch J., and Al-Samman T., “Superior Light Metals by Texture Engineering: Optimized Aluminum and Magnesium Alloys for Automotive Applications”, Acta Materialia, Vol. 61, pp. 818-843, 2013.
  • Hartl, C., “Research and Advances in Fundamentals and Industrial Applications of Hydroforming”, Journal of Materials Processing Technology, Vol. 167, No. 2, pp. 383-392, 2005.
  • Hariharan, K., Lee, M.-G., Kim, M.-J., Han, H. N., Kim, D., et al., “Decoupling Thermal and Electrical Effect in an Electrically Assisted Uniaxial Tensile Test Using Finite Element Analysis”, Metallurgical and Materials Transactions A, Vol. 46, No. 7, pp. 3043-3051, 2015.
  • Green C.R., McNeal T.A., and Roth J.T., “'Springback Elimination for Al-6111 Alloys Using Electrically-Assisted Manufacturing (EAM)”, in: Trans. North American Manufacturing Research Institute of SME,Vol. 37, pp. 403-410, 2009.
  • Golovashchenko, S. and Krause, A., “Improvement of Formability of 6xxx Aluminum Alloys Using Incremental Forming Technology”, Journal of Materials Engineering and Performance, Vol. 14, No. 4, pp. 503-507, 2005.
  • Dzialo C.M., Siopis M.S., Kinsey B.L., and Weinmann K.J., “Effect of Current Density and Zinc Content During Electrical-Assisted Forming of Copper Alloys”, CIRP Annals – Manufacturing Technology, Vol. 59, pp. 299–302, 2010.
  • Conrad, H., “Electroplasticity in Metals and Ceramics”, Materials Science and Engineering: A, Vol. 287, No. 2, pp. 276-287, 2000.
  • Conrad, H., “Effects of Electric Current on Solid State Phase Transformations in Metals”, Materials Science and Engineering: A, Vol. 287, No. 2, pp. 227-237, 2000.
  • Conrad H., “Electroplasticity in Metals and Ceramics”, Materials Science and Engineering: A, Vol. 287, pp. 276-287, 2000.
  • Conrad H., “Electroplasticity in Metals and Ceramics”, Materials Science and Engineering: A, Vol. 287(2), pp. 276-287, 2000.
  • Conrad H., “Electroplasticity in Metals and Ceramics”, Materials Science and Engineering A, Vol. 287, pp. 267–287, 2000.
  • Conrad H., “Effects of Electric Current on Solid State Phase Transformations in Metals”, Materials Science and Engineering: A, Vol. 287(2), pp. 227-237, 2000.
  • Conrad H., “Effects of Electric Current on Solid State Phase Transformations in Metals”, Materials Science and Engineering A, Vol. 287, pp. 227–237, 2000.
  • Cho J.R., Moon S.J., Moon Y.H., and Kang S.S., “Finite Element Investigation on Springback Characteristics in Sheet Metal U-Bending Process”, Journal of Materials Processing Technology, Vol. 141, pp. 109–116, 2003.
  • Cheng H.S., Cao J., and Xia Z.C., “An Accelerated Springback Compensation Method”, International Journal of Mechanical Sciences, Vol. 49, No. 3, pp. 267–279, 2007.
  • Carden W.D., Geng L.L., Matlock D.K., and Wagoner R.H., “Measurement of Springback”, International Journal of Mechanical Science and Engineering, Vol. 44, pp. 79–101, 2002.
  • Bunget, C., Salandro, W., Mears, L., and Roth, J. T., “Energy-Based Modeling of an Electrically-Assisted Forging Process”, North American Manufacturing Research Institution of SME, Vol. 38, pp. 647-654, 2010.
  • Bermingham M.J., McDonald S.D., Dargusch M.S., and StJohn D.H., “Microstructure of cast titanium alloys”, Materials forum, Vol. 31, pp. 84-89, 2011.
  • Andrawes, J.S., Heigel, J.C., Roth, J.T., and Warley, R.L., “Effects of DC Current on the Stress-Strain Curve and Hardness of 6061 T6511 Aluminum”, Proceeding of the ASME International Mechanical Engineering Congress and Exposition, pp. 169-178, 2004.
  • ASTM E8/E8M, “Standard Test Methods for Tension Testing of Metallic Materials”, American Society for Testing and Materials ASTM international, West Conshohocken, PA, 2010.
  • ASM Metals Handbook, “Properties and Selection: Nonferrous Alloys and SpecialPpurpose Materials”, Vol. 2, 1990,