김순호
조석수
주원식한국정밀공학회지, Vol. 17, No. 1, pp. 145-152, 2000[2021]
Walter tools
T. Sawa and Y Shoji, “Analytical Research on Mechanism of Bolt Loosening due to Lateral Loads,” Hard Lock Technical Reports, 2006
Scott Tomchick, Peter Zieve, Carter Boad, Adam Wellsbury, “Sideways Collar Anvil For Use on A340-600,” SAE International, 2005.
Scott Hogan, Paul Haworth and Jason Rediger, Richard Wilkes, “Technical Improvements to the ASAT2 Boeing 777 Spar Assembly Cell,” SAE International, 2011.
Samuel O. Smith, Gary Potticary and Gareth Lewis “Lockbolt Qualification Testing for Wing Panel Assemblies,” SAE Technical Paper, 2000.
S.S. Pande and H.P. Relekar, “Investigation on Reducing Burr Formation in Drilling,” International Journal of Machine Tool Design and Research, Vol. 26, No. 3, pp. 339-348, 1986.
Ray Holden and Paul Haworth, Ian Kendrick and Andrew Smith, “Automated Riveting Cell for A320 Wing Panels with Improved Throughput and Reliability (SA2),” SAE International, 2007.
Peter Zieve, John Hartmann, Steve Howard and Karl Hermann, "Design of the Automated Electromagnetic Riveting Assembly Cell." SAE Aerospace Automated Fastening Conference, 1990.
Peter B. Zieve, “Low Voltage Electromagnetic Riveter,” Mechanical Engineering, University of Washington, 1986.
Peter B. Zieve, Todd Rudberg and Peter Vogeli, Andrew Smith and Ian Moore, “A Two Tower Riveting Machine with a True Z Axis,” Society of Automotive Engineers, 2004.
Peter B. Zieve, Andrew Smith, “Wing Assembly System for British Aerospace Airbus for the 320,” Society of Automotive Engineers, 1997.
P. Andris, J. Weis and I. Frollo, “Magnetic Field of Spiral-shaped Coil,” MEASUREMENT 2009, pp. 262-265, 2009.
NASM1312-16 Fastener Test Methods Method 16 Clamping Force for Installation, Formed Fasteners, NAS, 2011.
John Hartmann, “Rivet Quality in Robotic Installation,” Society of Manufacturing Engineers, 1989.
John Hartmann, Michael Assadi, Scott Tomchick and John Barry, “Low Voltage Electromagnetic Lockbolt Installation,” SAE Technical Paper, 1992.
John Hartmann and Chris Meeker, Alan Minshull and Andrew Smith, “Automated Wing Panel Assembly for the A340-600,” Society of Automotive Engineers, 2000.
James, L. R., “Air Force Damage Tolerance Design Philosophy,” ASTM STP 842, pp. 134~141, 1984.
Guhring, Inc.
Eurocopter, “Methodology for the FatigueSubstantiation of the Mechanical Components and Airframe,” KHP project, TTK005A0027E01A, pp.64~71, 2006.
E. Paese, M. Geier, R. P. Homrich and J. L. Pacheco, “ Simplified Mathematical Modeling for an Electromagnetic Forming System with Flat Spiral Coil as Actuator,” J. Braz. Soc. Mech. Sci. & Eng., Vol. 33, No. 3, pp. 324-331, 2011.
David Remley, Jason Rediger, Paul Haworth, and Ray Holden, “Slug Rivet Machine Installs 16 Rivets Per Minute Drill-Rivet-Shave,” SAE International, 2009.
D57RE1306182 - High Load Transfer bottom skin Joint Fatigue Test to Qualify the KAI's DRM OWA Process into Production, Airbus, 2014.
D57ME1306406- SA Bottom Skin Transfer Package - Qualification Plan, Airbus, 2013.
Christopher Buchheit, Peter Zieve, “Horizontal Rivet Injector Design Used on A320 Upper Panel,” SAE International, 2007.
Boeing, Orders & Deliveries, 2015 Annual report.
Airbus, Airbus Annual Report, 2015 Annual report.
ASNA2025 – Bush - Use with ASNA2043, ASNA2048, ASNA2391 and ASNA2392, Airbus, 2004.