연구동향 분석
박사

백색 발광다이오드에서의 색균일성 향상에 관한 연구 = A Study on the Chromaticity Distribution Improvement of White Light Emitting Diode

박승현 2017년

논문상세정보
    • 저자 박승현
    • 형태사항 116: 26 cm
    • 일반주기 지도교수: 류상완
    • 학위논문사항 2017. 8, 물리학과, 학위논문(박사)-, 전남대학교
    • DDC 530
    • 발행지 광주
    • 언어 kor
    • 출판년 2017
    • 발행사항 전남대학교
    유사주제 논문( 385)
인용/피인용
' 백색 발광다이오드에서의 색균일성 향상에 관한 연구 = A Study on the Chromaticity Distribution Improvement of White Light Emitting Diode' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 물리학
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
335 0

0.0%

' 백색 발광다이오드에서의 색균일성 향상에 관한 연구 = A Study on the Chromaticity Distribution Improvement of White Light Emitting Diode' 의 참고문헌

  • 형광체 필름과 그 제조방법 및 형광체 시트를 채용한 LED 칩 패키지
    박승현 이계선 이상헌 정성훈 조용익 등록번호 : PCT/KR/011502 [2014]
  • 플립칩 타입의 발광 다이오드 소자 조립체, 그의 제죠용 기판 조립체 및 그의 제조 방법
    박승현 이계선 이상헌 정성훈 조용익 등록번호 : 10--0010246 [2013]
  • 플렉시블 ＬＥＤ 조명용 모듈 및 평판 디스플레이 장치
  • 플렉시블 광변환 필름 및 그 제조 방법
    김태훈 박승현 등록번호 : 10--0050662 [2015]
  • 프리폼 형광체 시트가 사용된 백색 엘이디 소자 제조 방법
  • 프리폼 형광체 시트가 사용된 백색 엘이디 소자 제조 방법
    박승현 이계선 이상헌 정성훈 조용익 등록번호 : PCT/KR/005059 [2012]
  • 의료용 고 조도 발광 다이오드 헤드라이트
    박승현 이계선 이의형 정재헌 주영구 새물리, Vol.61, Number2, 2011년 2월, pp. 139~144 [2011]
  • 엘이디 소자 장착용 시트 평가 시스템 및 방법
  • 상온 선택적 전극 보호 수용성 수지가 적용된 전극 노출형 침전 및 증발형 용제가 포함된 형광체 제조방법과 형광체 코팅층이 형성된 ＬＥＤ 및 그 제조방법
    박승현 이계선 이상헌 정성훈 조용익 등록번호 : 10-2013-0092100 [2013]
  • 능동 열전소자를 이용한 엘이디 패키지 및 엘이디 패키징 방법
    김태훈 박승현 등록번호 : 10-1509604
  • 내열,내습성이 강화된 구조를 채용한 발광다이오드 패키지 및 그 제조 방법
    박승현 조용익 등록번호 : 10--0105113 [2011]
  • “백색 발광다이오드 PKG공정에서 film transfer 기법과 film 평가 시스템”
    고원우 박승현 이계선 조용익 제7회 반도체조명학회 학술대회 [2013]
  • “반도체조명용 고전압 구동용 LED Array에서의 Thermal resistance 측정”
    박승현 이아름 조용익 제2회 반도체조명학회 학술대회 [2010]
  • “반도체 조명에서의 동작한계 stress 신뢰성 시험에 의거한 LED PKG stress 고장모드 분류 및 분석”
    고원우 김강호 박승현 이계선 조용익 제2회 반도체조명학회 학술대회 [2010]
  • “둠 렌즈가 적용된 LED Package의 측정 초점 위치에 따른 광학 특성 비교”
    김강호 박승현 여인선 이계선 조용익 제5회 반도체조명학회 학술대회 [2012]
  • “고전압 구동 청색 HV LED”
  • “phosphor film PL mapping을 통한 Color binning”
    박승현 송인범 제 11회 반도체조명학술대회 [2015]
  • “White LED die used 3-D stack bump for conformal coating in LED PKG”
    박승현 이계선 이상헌 조용익 제3회 반도체조명학회 학술대회 [2011]
  • “The Understanding of CCT and Chromaticity Single Binning for White LEDs”
    박승현 정상헌 제2회 반도체조명-광전자학회 [2016]
  • “The Analysis of failure rate and reliability test for LED based general lighting”
    박승현 이계선 황남 IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits [2010]
  • “Remote phosphor를 이용한 LED PKG의 MacAdam ellipse step 강화”
    박승현 정상헌 조준 제10회 반도체조명학회 학술대회 [2014]
  • “Remote phosphor를 이용한 LED PKG의 MacAdam Ellipse step 강화”
    박승현 송인범 정상헌 조준 제1회 반도체조명-광전자학회 [2015]
  • “Flip chip LED PKG for angular color homogenity applying imprinting technologies”
    류상완 박승현 이계선 한국물리학회 춘계 학술대회 [2014]
  • “Film Transfer method가 적용된 설계형 백색 LED소자 제작”
    박승현 이계선 이상헌 이의형 정성훈 조용익 제5회 반도체조명학회 학술대회 [2012]
  • “Enhanced color consistency of phosphor film conversion for white LEDs”
    고원우 박승현 이계선 조용익 제7회 반도체조명학회 학술대회 [2013]
  • “Effect of HfO2 insulation layer on reliability characteristics in GaN based LED”
    류상완 박승현 이계선 이상헌 정성훈 조용익 제8차 강유전체 심포지엄 [2012]
  • “Effect of HfO2 Passivation layer in InGaN based LED for improved reliability”
    김윤석 김태훈 류상완 박승현 12th International Conference on Nano Science and Nano Technology [2014]
  • “Developments of a "Pre-mold phosphor silicone structure"
    박승현 이계선 이상헌 정성훈 조용익 LED Package Technology for Color Bin and Uniformity” International Conference on Electronic Packaging Technology & High Density Packaging [2012]
  • “A detailed study on the requirements for consistency of PC-LED sources : CCT, Chromaticity Binning control method”
    류상완 박승현 정상헌 한국물리학회 추계 학술대회 [2015]
  • Z. Y. Liu, S. Liu, K. Wang, and X. B. Luo, IEEE Trans. Compon. Pack. Technol., vol. 33,no. 4, pp. 680–687, Dec. 2010.
  • Z. Y. Liu, S. Liu, K. Wang, and X. B. Luo, Appl. Opt., vol. 49, no. 2, pp. 247–257, 2010.
  • Z. Liu, S. Liu, K. Wang, and X. Luo, “Frontiers Optoelectron. China, vol. 2, no. 2, pp. 119–140, 2009.
  • Y. Zhu and N. Narendran, “Optimizing the performance of remote Phosphor LEDs,” J. Light & Vis. Env., vol. 32, no. 2, 2008.
  • Y. Tian, et al., J. Appl. Phys., vol. 109, no. 5, pp. 053511–1–053511–6, 2011.
  • Y. Shuai, Y. Z. He, N. T. Tran, and F. G. Shi, “Angular CCT uniformity of Phosphor converted white LEDs: effects of Phosphor materials and packaging structures,” IEEE Photon. Technol. Lett. 23(3), 137–139 (2011).
  • Y. Ito, T. Tsukahara, S. Masuda, T. Yoshida, N. Nada, T. Igarashi, T. Kusunoki, and J. Ohsako, “Optical design of Phosphor sheet structure in LED backlight system,” in SID Symp. Dig. Tech. Papers, 2008, vol. 39, pp. 862–865.
  • Y. H. Lu and C. H. Tien, “Novel direct-LED-backlight unit using grooved hexagonal light-guide plate,” in SID Symp. Dig. Tech. Papers, 2006, vol. 37, pp. 1513–1516.
  • W. D. Collins, W. L. Snyder, and D. A. Steigerwald, “Producing self-aligned and self-exposed photoresist patterns on light emitting devices,” U.S. Patent 6 756 186 B2, Jun. 29, 2004.
  • W. D. Collins, M. R. Krames, G. J. Verhoeckx, and N. J. M. Leth, “Using electrophoresis to produce a conformal coated Phosphor-converted light emitting semiconductor,” US Patent 6576488 (2001).
  • W. D. Collins, M. R. Krames, G. J. Verhoeckx, and N. J. M. Leth, US Patent 6576488 (2001).
  • Ui Hyung Lee, Jae hun Jung, Seung Hyun Park, Gye Seon Lee, Young-Gu Ju High illuminance ligh emittng diode headlight for medical applications LED and Display Technologies, Proceedings Vol. 7852
  • The Blue Laser Diodes, GaN Based Light Emitters and Lasers, S. Nakamura and G. Fasol, Eds.. Berlin, Germany: Springer, 1997, pp. 216–221.
  • Seung Hyun Park, Yoon Seok Kim, Tae Hoon Kim, and Sang Wan Ryu Improved Reliability of InGaN-Based Light-Emitting Diodes by HfO2 Passivation Layer Journal of Nanoscience and Nanotechnology Vol. 15, 1-3, 2015
  • Seung Hyun Park, Sang Hern Lee, Yong Hyun Kim, Young Woo Kim, San-Wan Ryu “ Improvement in homogeneity and binning yield of color coordinate by a conformal phosphor sheet technique in white flip-chip LEDs” Semiconductor Science and Technology, (2016), Accepted.
  • Schanda J, SA˜ndor N. Colour rendering, past -present - future: International Lighting andColour Conference, Cape Town, South Africa,Nov 2 –5: 2003.10 Mahler E, Ezrati J-J, Vie not F. Testing LEDlighting for colour discrimination and colourrendering. Color Research and Application2009, 34: 8–17.
  • S. Nakamura, “Present performance of InGaN based blue/green/yellow LEDs,” SPIE, vol. 3, 2002.
  • S. Liu and X. B. Luo, LED Packaging for Lighting Applications: Design, Manufacturing and Testing. New York, USA: Wiley, 2011.
  • S. C. Allen and A. J. Steckl, “A nearly ideal Phosphor-converted white light-emitting diode,” Appl. Phys. Lett., vol. 92, p. 143309, 2008.
  • S. C. Allen and A. J. Steckl, “A nearly idea Phosphor-converted white light-emitting diode,” Appl. Phys. Lett., vol. 92, p. 143309, 2008.
  • S. A. Yun, Y. Z. He, N. T. Tran, and F. G. Shi, IEEE Photon. Technol. Lett., vol. 23, no. 3, pp.137–139, Feb. 1, 2011.
  • R. Hu, et al., “Design of a novel freeform lens for LED uniform illumination and conformal Phosphor coating,” Opt. Express, vol. 20, no. 13, pp. 13727–13737, 2012.
  • R. Hu, X. B. Luo, H. Feng, and S. Liu, “Effect of Phosphor settling on the optical performance of Phosphor converted LED,” J. Lumin, vol. 132, no. 5, pp. 1252–1256, 2012.
  • Narendran N, Deng L. Color renderingproperties of LED light sources. SecondInternational Conference on Solid StateLighting, SPIE Congress. Seattle, USA, 9–11July 2002, pp. 61–67.
  • N. T. Tran, J. P. You, and F. G. Shi, “Effect of Phosphor particle size on luminous efficacy of Phosphor-converted white LED,” J. Lightw. Technol., vol. 27, no. 22, pp. 5145–5150, Nov. 15, 2009.
  • N. Narendran, Y. Gu, J. P. Freyssinier-Nova, and Y. Zhu, “Extracting Phosphor-scattered photons to improve white LED efficiency,” Phys. Stat. Sol. (A), vol. 202, no. 6, 2005.
  • N. Narendran, L. Deng, R. M. Pysar, Y. Gu, and H. Yu, “Solid-state lighting: Failure analysis of white LEDs,” in SPIE Third Int. Conf. on Solid State Lighting, 2004, vol. 5187, pp. 267–275.
  • N. Narendran, 2005, pp. 594108-1–594108-6.
  • M. R. Krames, H. Amano, J. J. Brown, and P. L. Heremans, “Introduction to the issue on high-efficiency light-emitting diodes,” IEEE J. Sel. Topics Quantum Electron., vol. 8, no. 2, pp. 185–188, Mar./Apr. 2002.
  • M. Anandam, “Progress of LED backlights for LCDs,” J. SID, vol. 16/2, pp. 287–310, 2008.
  • Kubelka, J. Opt. Soc. Am. 38(5), 448 (1948).
  • K. Wang, D. Wu, F. Chen, Z. Y. Liu, X. B. Luo, and S. Liu, “Angular color uniformity enhancement of white light-emitting diodes integrated with freeform lenses,” Opt. Lett. 35(11), 1860–1862 (2010).
  • K. Wang, D. Wu, F. Chen, Z. Y. Liu, X. B. Luo, and S. Liu, Opt. Lett., vol. 35, no. 11, pp. 1860–1862, 2010.
  • K. Wang, D. Wu, F. Chen, Z. Liu, X. Luo, and S. Liu, “Angular color uniformity enhancement of white light emitting diodes integrated with freeform lenses,” Opt. Lett., vol. 35, pp. 1860–1862, 2010.
  • K. D. Chickering, JOSA V61, n1, 1971
  • K. D. Chickering, JOSA V57 n4, 1967
  • Jost-Boissard S, Fontoynont M, Blanc-GonnetJ. Perceived lighting quality of LED sourcesfor the presentation of fruit and vegetables.Journal of Modern Optics 2009, 56: 1420–1432.
  • J.-H. Yum, S.-Y. Seo, S. Lee, and Y.-E. Sung, “Y Al O :Ce Phosphor coatings on gallium nitride for white light emitting diodes,” J. Electrochem. Soc., vol. 150, no. 2, pp. H47–H52, 2003.
  • J.-H. Yum, S.-Y. Seo, S. Lee, and Y.-E. Sung, “Comparison of Y Al O :Ce Phosphor coating methods for white light emitting diode on gallium nitride,” in Proc. SPIE, 2001, vol. 4445.
  • J. S. Feng and J. P. Rothstein, J. Colloid Inter. Sci., vol. 354, no. 1, pp. 386–395, 2011.
  • J. P. You, N. T. Tran, and F. G. Shi, “Light extraction enhanced white light-emitting diodes with multi-layered Phosphor configuration,” Opt. Express, vol. 18, pp. 5055–5060, 2010.
  • J. K. Kim, H. Luo, E. F. Schubert, J. Cho, C. Sone, and Y. Park, “Strongly enhanced Phosphor efficiency in GaInN white light-emitting diodes using remote Phosphor configuration and diffuse reflector cup,” Jpn. J. Appl. Phys., vol. 44, no. 21, 2005.
  • J. K. Kim, H. Luo, E. F. Schubert, J. Cho, C. Sone, and Y. Park, Japanese J. Appl. Phys., vol. 44, no. 21, pp. L649–L651, 2005.
  • J. H. Yum, S. Y. Seo, S. Lee, and Y. E. Sung, “Comparison of Y3Al4O12:Ce0.05 Phosphor coating methods for white light-emitting diode on gallium nitride,” Proc. SPIE 4445, 60–69 (2001).
  • J. H. Yum, S. Y. Seo, S. Lee, and Y. E. Sung, Proc. SPIE 4445, 60–69 (2001).
  • Illuminating Engineering Society, TM-21-11: Projecting Long Term Maintenance of LED Light Sources, 2011.
  • Illuminating Engineering Society, LM-80-08: Measuring Lumen Maintenance of LED Light Sources, 2008.3
  • Hu and X. B. Luo, J. Lightwave Technol. 30(21), 3376 (2012)
  • Handbook of Optics, M. Bass, E. W. V. Stryland, D. R. Williams, and W. L. Wolfe, Eds. New York: McGraw-Hill, 1995, vol. 2, pp. 26.2–26.4.
  • H. Zheng, et al.,Opt. Express, vol. 20, no. 5,pp. 5092–5098, 2012.
  • H. Zheng, X. B. Luo, R. Hu, B. Cao, X. Fu, Y. M. Wang, and S. Liu, Opt. Express 20(5), 5092–5098 (2012).
  • H. Zheng, J. L. Ma, X. B. Luo, and S. Liu, in Proc. 12th Int. Conf. Electron. Packag. Technol. High Density Packag., Shanghai, China, 2011, pp. 1077–1080.
  • H. T. Huang, C. H. Hung, Y. P. Huang, C. H. Tien, C. C. Tsai, H. P. D. Shieh, J. Lin, J. Chen, P. Chen, and W. C. Chang, “UV Excited Flat Lighting (UFL) system for LCD-TV backlight application,” in SID Symp. Dig. Tech. Papers, 2008, vol. 39, pp. 862–865.
  • H. T. Huang, C. C. Tsai, and Y. P. Huang, “A direct-view backlight with UV excited trichromatic Phosphor conversion film,” J. Display Technol., vol. 6, no. 4, pp. 128–134, Apr. 2010.
  • H. T. Huang, C. C. Tsai, Y. P. Huang, C. C. Hsiao, S. P. Chen, Y. H. Peng, and W. C. Chang, “Dual-sided slim LCD display system with UV excited flat backlight,” in SID Symp. Dig. Tech. Papers, 2009, vol. 40, pp. 1030–1033.
  • H. Nobbs, Rev. Prog. Color. Relat. Top. 15, 66 (1985).
  • H. Luo, J. K. Kim, E. F. Schubert, J. Cho, C. Sone, and Y. Park, “Analysis of high-power packages for Phosphor-based white-light-emitting diodes,” Appl. Phys. Lett., vol. 86, p. 243505, 2005.
  • H. Luo, J. K. Kim, E. F. Schubert, J. Cho, C. Sone, and Y. Park, Appl. Phys. Lett., vol. 86, p. 243505, Jun. 2005.
  • H. Bechtel, P. Schmidt, W. Busselt, and B. S. Schreinemacher, in Proc. 8th Int. Conf. Solid State Lighting, 2008, pp. 70580E-1–70580E-10.
  • G. H. Negley and M. Leung, U.S. Patent 20 070 224 716, May 1, 2007.
  • F. X. Siilion and C. Puech, Radiosity and Global Illumination. San Francisco, CA: Morgan Kaufmann, 1994.
  • Edstrom, J. Opt. Soc. Am. A 24(2), 548 (2007).
  • E. F. Schubert, Light-Emitting Diodes. Cambridge, U.K.: Cambridge Univ. Press, 2003, pp. 1–132.
  • Dzimbeg-Malcic, Z. Barbaric-Mikocevic, and K. Itric, Technical Gaz.18(1), 117 (2011).
  • D. Feng, Y. Yan, X. Yang, G. Jin, and S. Fan, “Novel integrated lightguide plates for liquid crystal display backlight,” J. Opt. A: Pure Appl. Opt., vol. 7, pp. 111–117, 2005.
  • C. Sommer, et al., “The impact of inhomogeneities in the Phosphor distribution on the device performance of Phosphor-converted highpower white LED light sources,” J. Lightw. Technol., vol. 28, no. 22, pp. 3226–3232, Nov. 15, 2010.
  • C. Sommer, et al., J. Lightw. Technol., vol. 28, no. 22, pp. 3226–3232, Nov. 15, 2010.
  • C. Sommer, P. Hartmann, P. Pachler, M. Schweighart, S. Tasch, G. Leising, and F. P. Wenzl, “A detailed study on the requirement for angular homogeneity of Phosphor converted high power white LED light sources,” Opt. Mater. 31(6), 837–848 (2009).
  • C. Sommer, J.R. Krenn, P. Hartmann, P. Pachler, M. Schweighart, S. Tasch, F.P.Wenzl, IEEE J. Sel. Top. Quantum Electron. 15 (2009) 1181– 1188.
  • C. Sommer, F. Reil, J.R. Krenn, P. Hartmann, P. Pachler, S. Tasch, F.P. Wenzl, J. Lightwave Technol. 29 (2011) 2285–2291.
  • C. Sommer, F. Reil, J.R. Krenn, P. Hartmann, P. Pachler, H. Hoschopf, F.P. Wenzl,J. Lightwave Technol. 28 (2010) 3226–3232.
  • C. Hoelen, H. Borel, J. de Graaf, M. Keuper, M. Landhorst, C. Mutter, L. Waumans, and R. Wegh, “Remote Phosphor LED modules for general illumination-towards 200 lm/W general lighting LED light sources,” in Proc. SPIE Eighth Int. Conf. on Solid State Lighting, 2008, vol. 7058, p. 70580M.
  • C. H. Tien, C. H. Hung, B. W. Xiao, H. T. Huang, Y. P. Huang, and C. C. Tsai, “Planar lighting by blue LEDs array with remote Phosphor,” in Proc. SPIE Light-Emitting Diodes: Material, Devices, and Appl. for Solid State Lighting XIV Conf. , 2010, vol. 7617, p. 761707.
  • C. H. Tien and C. H. Hung, “An iterative model of diffuse illumination from bidirectional photometric data,” Opt. Express, vol. 17, no. 2, 2009.
  • C. C. Sun et al., “Precise optical modeling for silicate-based white LEDs,” Opt. Express, vol. 16, pp. 20060–20066, 2008.
  • Boissard S, Fontoynont M. Optimization ofLED-based light blendings for object presentation.Color Research and Application 2009,34: 310–320.
  • Bodrogi P, Csuti P, Szabo F, Schanda J. Whydoes the CIE Colour Rendering Index fail forwhite RGB LED light sources?: Proceedings ofthe CIE Expert Symposium on LED LightSources: Physical Measurement and Visual andPhotobiological Assessment. CIE Publicationx026:2005, Vienna: CIE, 7–8 June 2004,pp. 24–27. Tokyo, Japan.
  • B. W. Xiao, C. H. Hung, H. T. Huang, Y. P. Huang, C. H. Tien, C. C. Tsai, H. P. D. Shieh, J. Chen, J. Lin, and W. C. Chang, “Optical properties of Visible-Light Excited Phosphor sheet (VEPS) system,” in SID Symp. Dig. Tech. Papers, 2009, vol. 40, pp. 1034–1037.
  • B. P. Loh, N. W. Medendorp, Jr., P. Andrews, Y. Fu, M. Laughner, and R. Letoquin, “Method of uniform Phosphor chip coating and LED package fabricated using method,” US Patent 20080079017 A1 (2008).
  • B. P. Loh, N. W. Medendorp, Jr., P. Andrews, Y. Fu, M. Laughner, and R. Letoquin, US Patent 20080079017 A1 (2008).
  • B. L. Wu, X. B. Luo, H. Zheng, and S. Liu, Opt. Express, vol. 19, no. 24, pp. 24115–24121, 2011.
  • B. Hou, H. Rao, and J. Li, “Phosphor coating technique with slurry method in application of white LED,” in Proc. SPIE, 2008, vol. 6841, p. 684106.
  • B. Hou, H. B. Rao, and J. F. Li, “Phosphor coating technique with slurry method in application of white LED,” Proc. SPIE 6841, 684106 (2007).
  • B. Hou, H. B. Rao, and J. F. Li, Proc. SPIE 6841, 684106 (2007).
  • B. Braune, K. Petersen, J. Strauss, P. Kromotis, and M. Kaempf, “A new wafer level coating technique to reduce the color distribution of LEDs,” Proc. SPIE 6486, 64860X (2007).
  • B. Braune, K. Petersen, J. Strauss, P. Kromotis, and M. Kaempf, Proc. SPIE 6486, 64860X (2007).
  • American National Standards Institute, Specifications for the Chromaticity of Solid State Lighting Products, ANSI_NEMA_ANSLG C78.377-2008, Virginia: American National Standard Lighting Group, 2008.
  • ANSI NEMA ANSLG C78.377-2014
  • A. Zukauskas, M. S. Shur, and R. Caska, Introduction to Solid-state Lighting. New York, USA: Wiley, 2002.