연구동향 분석
박사

Structural Design Recommendations for Outer Wall of Full-scale LNG Storage Tank Applied with Impact-induced Fire Loading : 극한하중에 대한 Full-scale LNG 저장탱크 외조벽체의 구조설계방법 제안

Sang–Won Lee 2016년

논문상세정보
인용/피인용
' Structural Design Recommendations for Outer Wall of Full-scale LNG Storage Tank Applied with Impact-induced Fire Loading : 극한하중에 대한 Full-scale LNG 저장탱크 외조벽체의 구조설계방법 제안' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 토목 공학
  • Fire/화재
  • Impact
  • Impact induced fire
  • Implicit FEA
  • Performance Based Evaluation
  • Prestressed concrete (PSC)
  • RABT fire scenario
  • RABT 화재 시나리오. Explicit FEA
  • Satisfaction Curve
  • lng storage tank
  • lng저장탱크
  • 만족도 곡선
  • 성능중심평가
  • 유한요소 해석
  • 충돌
  • 충돌후화재
  • 프리스트레스드 콘크리트
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
1,149 0

0.0%

' Structural Design Recommendations for Outer Wall of Full-scale LNG Storage Tank Applied with Impact-induced Fire Loading : 극한하중에 대한 Full-scale LNG 저장탱크 외조벽체의 구조설계방법 제안' 의 참고문헌

  • Yu, Y.J. (2014), "Behavior of RC/PSC Concrete Slab Subjected to Impact Load", Dissertation, pp. 9
  • Yi N.H., Lee S.W., Kim J.W., Kim J.H.J. (2014), “Impact-resistant capacity and failure behavior of unbonded bi-directional PSC panels.” International Journal of Impact Engineering, Vol. 28, No. 1, pp. 578-584.
  • Yi N.H., Lee S.W., Choi S.J., Kim J.H.J. (2105), “Performance evaluation of PSC panel from impact-induced fire loading.” Magazine of Concrete Research, Vol. 67, No. 23, pp. 1257-1273.
  • Yi N.H., Kim J.H.J., Han T.S., Cho Y.G., Lee J.H. (2012), “Blast-resistant characteristics of ultra high strength concrete and reactive powder concrete.” Construction and Building Material, Vol. 28, No. 1, pp. 578-584.
  • Yi N.H., Choi S.J., Lee S.W., Kim J.H.J. (2015), “Failure behavior of unbonded bi-directional prestressed concrete panels under RABT fire scenario.” Fire Safety Journal, Vol. 71, pp. 123-133.
  • Xiaomeng H., Wenzhoung Z. (2011), “Experiment and analysis on temperature distribution of prestressed concrete beams and slabs.” 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet)
  • Won J.P., Choi S.W., Park C.G., Park H.K. (2006), “Temperature distribution of wet-mixed high strength sprayed polymer mortar for fire resistance of tunnel.” Journal of KSCE, Vol. 26, No. 4C, pp. 283-290.
  • Williams, M.S. (1994), "Modeling of Local Impact Effect in Plain and Reinforced Concrete", ACI Structural Journal, Vol. 91, No. 2, pp. 178-187.
  • Thai, D. K., and Kim, S. E. (2014), "Failure analysis of reinfoced concrete walls under impact loading using the finite element approach", Engineering Failure Analysis, Vol. 45, 252-277.
  • Tang, T., Malvern, L.E., and Jenkins, D.A. (1992), "Rate Effect in Uniaxial Dynamic Compression of Concrete", Journal of Engineering Mechanics, ASCE, Vol. 118, No. 1, pp.108-124.
  • TM5-855-1/AFPAM32-1147/NAVFACP-1080/DAHSCWEMAN-97 (1997), Design and Analysis of Hardened Structures to Conventional Weapons Effects, Joint Departments of the Army, Air Force, Navy and the Defense Special Weapons Agency, Washington, DC.
  • TM5-1300/AFR 88-2/NAVFAC P-39 (1990), Structures to Resist the Effects of Accidental Explosions, Joint Departments of the Army, Air Force and Navy Washington, DC, November.
  • Singhal, A. and Kiremidjian, A.S. (1998), "Bayesian Updating of Fragilities with Application to RC Frames", Journal of Structural Engineering, vol. 124, no. 8, pp. 922-929.
  • Singhal, A. and Kiremidjian, A.S. (1996), "Method for Probabilistic Evaluation of Seismic Structural Damage", Journal of Structural Engineering, vol. 122, no. 12, pp. 1459-1467.
  • Singhal, A. and Kiremidjian, A.S. (1996), "Method for Earthquake Motion Damage Relationships with Application to Reinforced Concrete Frame", NCEER-97-0008 Technical Report, National Center for Earthquake Engineering Research(NCEER), Richmond, CA, USA, No. 119.
  • Shinozuka, M., Feng, M.Q., Lee, J.H. and Naganuma, T. (2000), "Statistical Analysis of Fragility Curves", Journal of Engineering and Mechanic, vol. 126, no. 12, pp. 1224-1231.
  • Shinozuka, M., Feng, M.Q., Kim, H., Uzawa, T. and Ueda, T. (2001), "Statistical Analysis of Fragility Curves, Technical Report", Multidisciplinary Center for Earthquake Engineering, Research(MCEER), Buffalo, NY, USA.
  • Schwer, L. (2010), An Introduction to the Winfrith Concrete Model. Schwer Engineering & Consulting Services, California, USA.
  • Sagals, G., Orbovic, N., and Blahoianu, A. (2011), "Sensitivity studies of reinforced concrete slabs under impact loading", Transactions of the 21st SMiRT, New Delhi, India, November.
  • Promat Tunnel (2016), http://www.promat-tunnel.com.
  • Pires, J. A., Ali, S. A., and Candra, H. (2011), "Finite element simulation of hard missile impacts on reinforced concrete slabs", Transactions of the 21st SMiRT, New Delhi, India, November.
  • Phan, H.D. (2010), "Development and Evaluation of Performance Based Mixture Design Method for Concrete Mix Proportion Design", Dissertation, pp. 70-85.
  • Phan D.H., Kim J.H.J., Yi N.H., You Y.J., Kim J.W. (2012), “Strength targeted PBMD of HSC based on one-parameter bayesian probabilistic method.” Journal of Advanced Concrete Technology, Vol. 10, pp. 137-150.
  • Organisation for Economic Co-operation and Development (2012), Improving Robustness Assessment Methodologies for Structures Impacted by Missiles (IRIS_2010).
  • Oliveira, D. A., Saudy, A., Lee, N. H., and Elgohary, M. (2011), "The effect of theaded bar reinforcement on the impact response of concrete walls", Transactions of the 21st SMiRT, New Delhi, India, November.
  • Nam J.W., Kim J.H.J, Kim S.B., Yi N.H., Byun K.J. (2008), “A study on mesh size dependency of finite element blast structural analysis induced by non-uniform pressure distribution from high explosive blast wave.” KSCE Journal of Civil Engineering, Vol. 12, No. 4, pp. 259-265.
  • Nam J.W., Kim H.J., Kim S.B., Kim J.H.J., Byun K.J. (2009), “Analytical study of finite element models for FRP Retrofitted concrete structure under blast loads.” International Journal of Damage Mechanics, Vol. 18, No. 5, pp. 461-490.
  • Murray, Y. D. (2007), Users Manual for LS-DYNA Concrete Material Model 159, Federal Highway Administration.
  • Murray, Y. D. (2007), Evaluation of LS-DYNA Concrete Material Model 159, Federal Highway Administration.
  • Moss P.J., Dhakal R.P., Wang G. (2008), “Buchanan AH. The fire behaviour of multi-bay, two-way reinforced concrete slabs.” Engineering Structure, Vol. 30, No. 12, pp. 3566-3573.
  • Mays G.C., Smith P.D. (1995), “Blast effect on buildings: design of buildings to optimize resistance to blast loading.” London: Thomas Telford MIDAS Information Technology Corporation. Analysis & algorithm, MIDAS FEA user manual.
  • Livermore Software Technology Corporation (2007), LS-DYNA Keyword User's Manual, Version 971.
  • Lee J.Y., (2012), “Strain rate effect on the impact resistance of fiber and FRP sheet reinforced concrete” Dissertation.
  • Kodur V. (2014), “Properties of Concrete at Elevated Temperatures” ISRN Civil Engineering.
  • Jones, N. (2011), Structural Impact, Second Edition,. Cambridge University Press.
  • Huges, B.P. and Gregory, R. (1972), "Concrete Subjected to High Rates of Loading in Compression", Magazine of Concrete Research, Vol. 24, No. 78, pp. 25-36.
  • Ha, J.H., Yi N.H., Choi J.K., Kim J.H.J. (2011), “Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading.” Composite Structure, Vol. 93, No. 1, pp. 2070-2082.
  • Fu, H.C., Erki, M.A., and Seckin, M. (1991), "Review of Effect of Loading Rate on Reinforced Concrete", Journal of Structural Engineering, ASCE, Vol. 117, No. 12, pp. 3660-3679.
  • Eurocode 2, Design of Concrete Structure Part 1, 2 General Rules-Structural Fire Design.
  • Eurocode (1992), Part 1-2, BS EN 1992-1-2, General Structural Fire Design, Institution Structural Engineers, refer to Properties of Concrete for use in Eurocode 2 by Bamforth et al.
  • EN 1473 (2007), Installation and equipment for liquefied natural gas. Design of onshore installations
  • EN 14620 (2006), Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 C and –165 C. General
  • CIB. (1982), Working with The Performance Concept in Building - Report W50, Rotterdam, International Council for Research and Innovation in Building and Construction.
  • Box, G.E.P. and Tiao, G.C. (1973), Bayesian Inference in Statistical Analysis, New York, John Wiley & Son.
  • Bolstad, W. M. (2004), Introduction to Bayesian Statistics, New Jersey, John Wiley & Son.
  • Beppu, M., Miwa, K., Itoh, M., Katayama, M., & Ohno, T. (2008), “Damage evaluation of concrete plates by high-velocity impact,” International Journal of Impact Engineering, Vol. 35, No, 12, pp. 1419-1426.
  • Bangash, M.Y.H. (2009), Shock, Impact and Explosion Structural Analysis and Design, Springer, London.
  • Bailey C.G., Ellobody E. (2009), “Fire tests on bonded post-tensioned concrete slabs.” Engineering Structure, Vol. 31, No. 3, pp. 686-696.
  • BS 8110 (1997), Structural use of concrete. Part 1 : code of practice for design and construction. British Standard.
  • BS 7777 (1993), Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Guide to the general provisions applying for design, construction, installation and operation.
  • Ang, A.H.S. and Tang, W.H. (1984), Probability Concept in Engineering Planning and Design, New York, John Wiley & Son.
  • Ali F., Nadjai A., Choi S. (2010), “Numerical and experimental investigation of the behavior of high strength concrete columns in fire.” Engineering Structure, Vol. 32, No. 5, pp. 1236-1243.
  • Agarwal A., Varma A.H. (2014), “Fire induced progressive collapse of steel building structures: The role of interior gravity columns.” Engineering Structure, Vol. 58, pp. 129-140.
  • ASCE Physical Security (1999), Structural Design for Physical Security: State of the Practice Report, Task Committee on Physical Security, American Society of Civil Engineers, New York, pp. 4.1-4.48.
  • ACI(American Concrete Institute) 349-07 (2007), Code Requirement for Nuclear Safety-related Concrete Structures, ACI Manual of Concrete Practice.
  • ACI(American Concrete Institute) 216.1-07 (2007), Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies, ACI Manual of Concrete Practice.