'
로터리 압축기의 실린더 형상 변화에 따른 구조해석 및 최적 설계에 관한 연구 = A Study on Structure Analysis and Optimal Design with Cylinder Shape of Rotary Compressor' 의 주제별 논문영향력
논문영향력 요약
주제
응용 물리
압축기
동일주제 총논문수
논문피인용 총횟수
주제별 논문영향력의 평균
15
0
0.0%
주제별 논문영향력
논문영향력
주제
주제별 논문수
주제별 피인용횟수
주제별 논문영향력
주제분류(KDC/DDC)
응용 물리
2
0
0.0%
주제어
압축기
13
0
0.0%
계
15
0
0.0%
* 다른 주제어 보유 논문에서 피인용된 횟수
0
'
로터리 압축기의 실린더 형상 변화에 따른 구조해석 및 최적 설계에 관한 연구 = A Study on Structure Analysis and Optimal Design with Cylinder Shape of Rotary Compressor' 의 참고문헌
Z. Yang, X. Wu, Retrofits and option for the alternatives to HCFC-22, Energy 59 (2013) 1-21.
Y. Z. Lee, S. D. Oh, Friction and wear of the rotary compressor vane-roller surfaces for several sliding conditions, Wear 255 (2003) 1168-1173.
Y. Yamamoto, etc., Development of high efficiency swing compressor for R32 refrigerant, International Compressor Engineering Conference (2014) 2298.
Y. M. Huang, S. N. Tsay, Mechanical efficiency optimization of a sliding vane rotary compressor, Journal of Pressure Vessel Technology 131 (2009).
Y. L. Teh, K. T. Ooi, Experimental study of the revolving vane (RV) compressor, Applied Thermal Engineering 29 (2009) 3235-3245.
Y. Ito, etc., Numerical analysis for rotating motion of a rolling piston in rotary compressors effective factors for characteristics of rotating motion of a rolling piston, International Compressor Engineering Conference (2010) 1963.
Y. Ito, etc., Mixed lubrication analysis of vane sliding surface in rotary compressor mechanisms- influences of elastic deformation at surface end of vane slot, International Compressor Engineering Conference (2008) 1933.
Y. Ito, etc., Lubricating characteristics and motion characteristics of a rolling piston for rotary compressors in air conditioners, Journal of Engineering Tribology 228 (2014) 984-996.
Y. Inada, etc., Development of high efficiency and low cost brushless DC motor for compressor, International Compressor Engineering Conference (2000) 1434.
Y. Chen, etc., A study on the operational stability of a refrigeration system having a variable speed compressor, International Journal of Refrigeration 31 (2008) 1368-1374.
Y. C. Ma, J. Y. Bae, Determination of effective force area and valve behavior on the rolling piston type compressor, International Compressor Engineering Conference (1996) 1134.
X. Tojo, etc,. Dynamic behavior of sliding vane in small rotary compressors, International Compressor Engineering Conference (1978) 242.
X. Liu, etc., A novel vapor injection structure on the blade of a rotary compressor, Applied Thermal Engineering 100 (2016) 1219-1228.
X. Al, etc., A finite element analysis of dynamically loaded journal bearings in mixed lubrication, Tribology Transactions 41 (1998) 273-281.
WT1030/WT1030M digital power meter user manual, Yokogawa Electric Corporation.
Testing of refrigerant compressors, ISO 5111, ISO 917 (1993).
T. Yoshimura, etc., Analysis of lubricating characteristics of rotary compressors for domestic refrigerators, Transactions of the ASME 121 (1999) 780.
T. Yanagisawa, etc., Motion analysis of rolling piston in rotary compressor, International Compressor Engineering Conference (1982) 392.
T. Yanagisawa, T. Shimizu, Leakage losses with a rolling piston type rotary compressor. I. Radial clearance on the piston, International Journal of Refrigeration 8 (1985).
T. Q. Qureshi, S. A. Tassou, Variable speed capacity control in refrigeration systems, Applied Thermal Engineering 16 (1996) 103-113.
T. Matsuzaka, S. Nagatomo, Rolling piston type rotary compressor performance analysis, International Compressor Engineering Conference (1982) 386.
T. Karino, etc., Rotary compressor, International Compressor Engineering Conference (2010).
T. Futani, Y. Shida, Study on high efficiency brushless DC motor for compressor, International Compressor Engineering Conference (1994) 1062.
S. Y. Cho, etc., Characteristics analysis of single phase induction motor via equivalent circuit method and considering saturation factor, Journal of Electric Engineering Technology 8 (2013) 742.
S. Tanaka, etc., Mixed lubrication analysis of vane tip in rotary compressor, International Compressor Engineering Conference (2000) 1398.
S. Shrestha, etc., Compressor calorimeter test of refrigerants R410a alternative R-32, Dr-5 and L-41a, Air-conditioning, Heating and Refrigeration Institude (2013).
S. R. K. Bolloju, etc., Efficiency improvement of rotary compressor by improving the discharge path through simulation, International Compressor Engineering Conference (2014) 2361.
S. M, Kang etc., Development of high speed inverter rotary compressor for the air conditioning system, IOP Conf. Series: Materials Science and Engineering 90 (2015).
S. J. Lee, etc., Development of capacity modulation compressor based on a two stage rotary compressor - part II: Performance experiments and P-V analysis, International Journal of Refrigeration 61 (2016) 82-99.
S. J. Lee, etc., Development of capacity modulation compressor based on a two stage rotary compressor - part I: Modeling and simulation of compressor performance, International Journal of Refrigeration 54 (2015) 22-37.
S. J. In, etc, Performance test of residential heat pump after partial optimization using low GWP refrigerants, Applied Thermal Engineering 72 (2014) 315-322.
R. Valente, C. Villante, On the optimal design of one-rotor two-stages rotary-vane compressor, International Compressor Engineering Conference (2008) 1895.
R. J. Moffat, Describing the uncertainties in experimental results, Experimental Thermal and Fluid Science 1 (1988) 3-17.
P. Shu, etc., Influence of vane slot back-pressure on the characteristic of vane motion in rotary vane compressor, International Compressor Engineering Conference (1998) 1275.
P. K. Paul, Rotary compressor: P-V diagram and investigation into power requirements, International Compressor Engineering Conference (1988) 613.
P. K. Goenka, Analytical curve fits for solution parameters of dynamically loaded journal bearing, Journal of Tribology 106 (1984) 421.
O. Ekren, etc., Performance evaluation of a variable speed DC compressor, International Journal of Refrigeration 36 (2013) 745-757.
O. A. Hawaj, Theoretical modeling of sliding vane compressor with leakage, International Journal of Refrigeration 32 (2009) 1555-1562.
N. E. Carpenter, Retrofitting HFC134a into existing CFC12 systems, International Journal of Refrigeration 15 (1992) 6.
M. W. Spatz, etc., An evaluation of options for replacing HCFC-22 in medium temperature refrigeration systems, International Journal of Refrigeration 27 (2004) 475-483.
M. T. C. Faria, Finite Element analysis of oil lubrication elliptical journal bearings, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 9 (2015).
M. Masuda, etc., Development of swing compressor for alternative refrigerants, International Compressor Engineering Conference (1996) 1154.
M. H. Kim, etc., Fundamental process and system design issues in CO2 vapor compression systems, Progress in Energy and Combustion Science 30 (2004) 119-174.
M. H. Kim, C. W. Bullard, A simple approach to performance analysis of alternative refrigerant rolling piston type rotary compressor, Air-conditioning and Refrigeration Center (2001).
M. G. Duggan, etc., Refrigeration compressor performance using calorimeter and flowrater techniques, International Compressor Engineering Conference (1988) 622.
M. Fukuta, etc,. Analysis of leakage flow through clearance on rotor face in vane, International Compressor Engineering Conference (1992) 910.
M. Elashmawy, Theoretical investigation of friction forces between vane tip and cam ring in oil vane pumps, International Journal of Science Technology and Society 2 (2014) 121-128.
L. Yang, etc., Loss efficiency model of single and variable speed compressors using neural networks, International Journal of Refrigeration 32 (2009) 1423-1432.
L. Lv, etc., A novel structure of high efficiency rotary compressor, International Compressor Engineering Conference (2014) 2282.
L. Li, etc., Wrap of cylinder and its effect on main features of rotary vane compressor for automobile air conditioning system, International Journal of Refrigeration 26 (2003) 566-574.
K. Y. Noh, etc., Compressor efficiency with cylinder slenderness ratio of rotary compressor at various compression ratios, International Journal of Refrigeration (2016).
K. T. Ooi, T. N. Wong, A computer simulation of a rotary compressor for household refrigerators, Applied Thermal Engineering 17 (1997) 65-78.
K. T. Ooi, Design optimization of a rolling piston compressor for refrigerators, Applied Thermal Engineering 25 (2005) 813-829.
K. T. Ooi, Assessment of a rotary compressor performance operating at transcritical carbon dioxide cycles, Applied Thermal Engineering 28 (2008) 1160-1167.
K. Sawai, etc., Compressor with turning-paired vane and piston, International Compressor Engineering Conference (2014) 2335.
K. Okada, K. Kuyama, Motion of rolling piston in rotary compressor, International Compressor Engineering Conference (1982) 391.
K. M. Tan, etc., Performance Measurement of Revolving Vane Compressor, International Compressor Engineering Conference (2014) 2301.
K. M. Tan, K. T. Ooi, Experimental study of fixed-vane revolving vane compressor, Applied Thermal Engineering 62 (2014) 207-214.
K. C. Moun, etc., Performance evaluation of rotary compressor with special attention to the accuracy of P-V diagram, International Compressor Engineering Conference (1990) 734.
J. Wu, etc., Numerical analysis of temperature distribution of motor refrigerant in a R32 rotary compressor, Applied Thermal Engineering 95 (2016) 365-373.
J. Wu, etc., Experimental investgation on cold startup characteristics of a rotary compressor in the R290 air-conditioning system under cooling condition, International Journal of Refrigeration 65 (2016) 209-217.
J. S. Yang, etc., A sensitivity study of size parameters in twin type rolling piston compressor, International Journal of Refrigeration 36 (2013) 786-794.
J. S. Fleming, The energy efficiency of refrigerants: An assessment based on thermophysical properties, International Journal of Refrigeration 58 (2015) 235-242.
J. F. Booker, Dynamically loaded journal bearing: Numerical application of the mobility method, Transactions of the ASME (1971).
J. B. Lee, etc., Development of a miniature twin rotary compressor, International Compressor Engineering Conference (2014) 2317.
H. Zhang, etc., Dynamics behaviors of the crankshafts in single cylinder and twin cylinder rotary compressor, International Journal of Refrigeration 47 (2014) 36-45.
H. Yang, etc., Study on leakage via the radial clearance in a novel synchronal rotary refrigeration compressor, International Journal of Refrigeration 34 (2011) 84-93.
H. Shintaku, etc., Experimental and theoretical study of an advanced rotary compressor, International Compressor Engineering Conference (2000) 1459.
H. Platts, Hydrodynamic lubrication of sliding vanes, International Compressor Engineering Conference (1976) 187.
H. Kruse, Experimental investigations on rotary vane compressors, International Compressor Engineering Conference (1980) 318.
H. Hirani, etc., Rapid performance evaluation of journal bearings, Tribology International 30 (1997) 825-834.
H. Hirani, etc., Rapid and globally convergent method for dynamically loaded journal bearing design, Journal of Engineering Tribology (1988).
H. Hirani, etc., Dynamically loaded finite length journal bearing: Analytical method of solution, Transactions of the ASME 121 (1999).
H. Hirani, etc., A hybrid solution scheme for performance evaluation of crankshaft bearings, Journal of Tribology 122 (2000) 733.
G. B. Ribeiro, G. M. D. Gennaro, Compressor calorimeter test of refrigerants R134a and N-13a, Air-conditioning, Heating and Refrigeration Institude (2013).
E. Kureha, M. Muraki, Lubrication state on the sliding part of a multiple vane type compressor, The 3rd International Conference on Design Engineering and Science (2014).
D. D. Schwerzler, J. F. Hamilton, An analytical method for determining effective flow and force areas for refrigeration compressor valving systems, International Compressor Engineering Conference (1972) 5.
D. Cai, etc., Simulation and comparison of leakage characteristics of R290 in rolling piston type rotary compressor, International Journal of Refrigeration 53 (2015) 42-54.
D. C. Ba, etc., Gas dynamics analysis of a rotary compressor based on CFD, Applied Thermal Engineering 99 (2016) 1263-1269.
C. M. N. F. Costa, etc., Considerations about the leakage through the minimal clearance in a rolling piston compressor, International Compressor Engineering Conference (1990) 780.
C. K. Lee, H. N. Lam, A comparison of different generalised modelling approaches for a scroll refrigerant compressor, International Journal of Refrigeration 36 (2013) 1369-1375.
C. H. Baek, ext., Effect of the cylinder volume ratio of a twin rotary compressor on the heating performance of a vapor injection CO2 cycle, Applied Thermal Engineering 67 (2014) 89-96.
C. C. Wang, System performance of R-1234yf refrigerant in air-conditioning and heat pump system - An overview of current status, Applied Thermal Engineering 73 (2014) 1412-1420.
C. Aprea, etc., Determination of the compressor optimal working conditions, Applied Thermal Engineering 29 (2009) 1991-1997.
B. A. Akash, S. A. Said, Assessment of LPG as a possible alternative to R-12 in domestic refrigerators, Energy Conversion and Management 44 (2003) 381-388.
A. T. Prata, etc., Dynamically loaded journal bearings: Finite volume method analysis, International Compressor Engineering Conference (1988) 599.
A. Sethi, etc., Low GWP R22 replacement for air conditioning in high ambient conditions, International Journal of Refrigeration 57 (2015) 26-34.
A. R. M. Sarip, M. N. Musa, Theoretical study of a novel multi vane rotary compressor, International Compressor Engineering Conference (2012) 2094.
A. Picksak, H. Kruse, Mathematical simulation of lubrication conditions in rotary vane, International Compressor Engineering Conference (1986) 546.
A. Burgstaller, etc., Influence of the main parameters of the suction valve on the overall performance of a small hermetic reciprocating compressor, International Compressor Engineering Conference (2008) 1934.
A. A. M. Redhwan, ext., Development of nanorefrigerants for various types of refrigerant based: A comprehensive review on performance, International Communications in Heat and Mass Transfer 76 (2016) 285-293.
'
로터리 압축기의 실린더 형상 변화에 따른 구조해석 및 최적 설계에 관한 연구 = A Study on Structure Analysis and Optimal Design with Cylinder Shape of Rotary Compressor'
의 유사주제(
) 논문