연구동향 분석
박사

항복강도 600MPa급 FCA 용접금속의 저온균열에 미치는 미세조직의 영향 = Effect of Microstructure on Cold Cracking in YS 600MPa Grade FCA Steel Welds

이명진 2016년

논문상세정보
인용/피인용
' 항복강도 600MPa급 FCA 용접금속의 저온균열에 미치는 미세조직의 영향 = Effect of Microstructure on Cold Cracking in YS 600MPa Grade FCA Steel Welds' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 금속세공술 과정과 기본 금속 생산
  • acicular ferrite
  • cold cracking
  • intergranular fracture
  • martensite
  • mechanism
  • microstructure
  • quasi-cleavage fracture
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
265 0

0.0%

' 항복강도 600MPa급 FCA 용접금속의 저온균열에 미치는 미세조직의 영향 = Effect of Microstructure on Cold Cracking in YS 600MPa Grade FCA Steel Welds' 의 참고문헌

  • Y. W. Cho, J. S. Byun and J. H. Shim, Materials Science Forum, 426-432, 1511-1516 (2003).
  • Y. J. Kang, J. J. Jang, J. H. Park and C. H. Lee, Met. Mater. Int., 20, 119 (2014).
  • Y. J. Kang, J. H. Jang, J. H. Park and C. H. Lee, Met. Mater. Int. 20, 119 (2014).
  • Y. D. Park, I. S. Maroef, A. Landau and D. L. Olsen, Weld. J. 81, 27 (2002).
  • Y. C. Lin and K. H. Lee, J Mater. Process. Tech., 63, 797 (1997).
  • W. W. Bose Filho, A. L. M. Carvalho and P. Bowen, Materials Science and Engineering A, 460-461, 436-452 (2007).
  • W. F. Savage, E. F. Nippes and E. S. Szekeres, Welding Journal, 55, 276-284 (1976).
  • T. Koseki, Weld. World, 49, 22-28 (2005).
  • T. Kitada and K. Fukuda, Nippon Kokan Technical Report, 47, 58-64 (1986).
  • T. Kannengiesser, T. Boelinghaus, Weld World, 57(1), 3-37 (2013).
  • T. K. Lee, H. J. Kim, B. Y. Kang and S. K. Hwang, ISIJ Int., 40, 1260 (2000).
  • T. Boniszewski, British Welding Journal, 12(7), 349-362 (1965).
  • T. Boniszewski and F. Watkinson, R. C. Baker and H. F. Tremlett, British Welding Journal, 12(7), 14-36 (1965).
  • T. Boniszewski and F. Watkinson, Metal and Materials, 7(2&3), 90-96&145-151 (1973).
  • S. Zhang, N. Hattori, M. Enomoto and T. Tarui, ISIJ Int., 36, 1301-1309 (1996).
  • S. W. Kang, M. H. Kim, Y. B. Kim, Y. T. Shin and H. W. Lee, J KWJS, 22, 543 (2004).
  • S. Seo, H. J. Kim, and H. S. Ryoo, METALS AND MATERIALS International, 14-4, 515~522 (2008).
  • S. S. Babu, Current Opinion in Solid State and Materials Science, 8, 267–278 (2004).
  • S. S. Babu and S. A. David, ISIJ Int, 42, 1344–1353 (2002).
  • S. Mukhopadhyay and T. K. Pal, Int. J. Adv. Manuf. Tech. 29, 262 (2006).
  • S. Matsui, T. Terasaki and M. Sakaguchi, Journal of Japan Society, 1, 49-55 (1983).
  • S. Liu and J. E. Indacochea, Welding Theory and Practice, Part 3 (1990).
  • S. Liu and D. L. Olson, Welding Journal, 65, 139-149 (1986).
  • S. Liu and D. L. Olson, J. Meter. Eng., 9, 237-251 (1987).
  • S. Kou, Welding metallurgy, JohnWiley and Sons, Nwe York (1987).
  • S. H. Kim, C. Y. Bang. K. S. Bang, Journal of Materials Science, 36, 1197 (2001).
  • S. C. Park, Y. J. Lee, H. J. Yi, G. B. Yu and S. S. Kang, International Journal of Precision Engineering and Manufacturing, 14, 2137-2142 (2013).
  • R. Scott Funderburk, Welding Innovation, XIV, 14 (1997).
  • R. S. Parmar, Welding process and technology. Khanna Publisher, New Delhi, 53-61 (1999).
  • R. Kuebler, M. Pitrun, I Pitrun, Australia Weld J, 45(1), 38-47 (2000).
  • R. J. Pargeter, TWI report No. 461/1992, TWI, Abington Cambridge, UK (1992).
  • R. J. Parageter, TWI Report 1992, 461 (1992).
  • R. A. Ricks, P. R. Howell and G. S. Barritte, J. Mater. Sci., 17, 732 (1982).
  • R. A. Farrar, Z. Zhang, S. R. Bannister and G. S. Barritte, Journal of Materials Science, 28, 1385-1390 (1993).
  • R. A. Farrar, Weld. Met. Fabr. 44, 578 (1976).
  • Q. L. Jiang, Y. J. Li, J. Wang and L. Zhang, Mat. Sci. and Tech., 20, 1565-1569 (2011).
  • P. Nevasmaa and A. Laukkanen, IIW Doc.No.IX-2088-04, Osaka, Japan, 11-16 July (2004).
  • P. H. M. Hart, Welding Journal, 65-1, 14-22 (1986).
  • P. H. M Hart, Weld J, 65, 14 (1986).
  • O. Grong, L. Kolbeinsen, C. van der Eijk and G. Tranell, ISIJ Int., 46, 824-831 (2006).
  • N. J. Petch, Philosophical Magazine 1, 331-337 (1956).
  • N. J. Petch, P. Stables, Nature 169, 842 (1952).
  • M. J. Robins, P. J. Kilgallon, Offshore Shore Technology Report-OTO, Dec, Cranfield University, UK (1999).
  • M. J. Park and H. W. Lee, Korean J. Met. Mater., 52, 983 (2014).
  • M. J. Lee, K. M. Cho, Y. D. Kim and N. H. Kang, Weld world. 59, 647 (2015).
  • M. J. Lee, K. M. Cho and N. H. Kang, Weld world, 59, 647-654 (2015).
  • M. J. Lee and N. H Kang, J KWJS, 32, 22 (2014).
  • M. D. Rowe, T. W. Nelson and J. C. Lippold, Weld J., Feb, 31 (1995).
  • L. Karlsson and H. K. D. H. Bhadeshia, Journal of the Japan Welding Society, 80, 110-119 (2011).
  • L. Devillers et al., Welding Inst., London, Paper 1 (1983).
  • K. Masubuchi, Analysis of welded structures, Perogamon press, (1980).
  • K. Hiraoka, Proc. of the 4th Ultra Steel Workshop, Tsukuba Japan, 40-41 (2007).
  • K. Hiraoka, Proc. of the 4th Ultra Steel Workshop, 40-41 (2000).
  • K. H. Kim, H. J. Kim and H. S. Ryoo, J KWJS, 23, 337 (2005).
  • K. Easterling, Introduction to the physical metallurgy of welding, Butter-worth & Co Ltd (1983).
  • J. Y. Kang, D. H. Kim, S. i. Baik, T. H. Ahn, Y. W. Kim, H. H. Han, K, H. Oh, H. C. Lee and S. H. Han, ISIJ Int, 51, 130 (2011).
  • J. W. Fisher, R. J. Dexter, Weld. J, 73(1), 35-43 (1994).
  • J. S. Seo, J. H. Kim, H. J. Kim and H. S. Ryoo, Journal of KWJS, 25-4, 342-346 (2007).
  • J. S. Seo, J. H. Kim, H. J. Kim and H. S. Ryoo, J KWJS, 82, 342 (2007).
  • J. S. Seo, J. H. Kim, H. J Kim, H. S. Ryoo, J KWJS 25-4, 242–346 (2007).
  • J. S. Seo, H. J. Kim, and H. S. Ryoo, METALS AND MATERIALS International, 14-4, 515~522 (2008).
  • J. S. Seo, H. J. Kim and H. S. Ryoo, Met Mater Int. 14, 515 (2008).
  • J. R. Garland and P. R. Kirkwood, Metal Construction part 2, 7-6, s320 (1975).
  • J. R. Garland and P. R. Kirkwood, Metal Construction part 1, 7-5, s275 (1975).
  • J. M. Gregg and H. K. D. H. Bhadeshia, Acta Mater., 45, 739 (1975).
  • J. M. Dowling, J. M. Corbett and H. W. Kerr, Metallurgical Transactions A, 17, 1611-1623 (1986).
  • J. L. Davidson, S. P. Lynch and A. Majumdar, Melbourne, Australia, 23rd October, 21-34 (1996).
  • J. L. Davidson, Australia Weld J, 43(3), 33-39 (1998).
  • J. H. Tweed and J. F. Knott, Acta Metallurgica, 35, 1401-1414 (1987).
  • ISO 17642-2, (2005).
  • IIW/IIS DOC. 452-74. Weld World 12, 65 (1974).
  • H. Yi, Y. Lee, J. Kim, S. Kang, Journal of Mechanical Science and Technology, 25, 2185-2190 (2011).
  • H. W. Park, J KWJS, 20, 746 (2002).
  • H. W. Lee, S.W. Kang and D.S. Um, Welding Journal, 503-510 (1998).
  • H. W. Lee, S. W. Kang and D. S. Um, Welding Journal, 77, 503-510 (1998).
  • H. W. Lee, Mat Sci and Eng A, 445–446, 328–335 (2007).
  • H. W. Lee, D. J. Lee and S. W. Kang, J KWJS, 26, 351-353 (2008).
  • H. Murata, N. Kato and H, Tamura, J Japn. Weld. Soc., 11, 545 (1993).
  • H. Mabuchi, R. Uemori and M. Fujioka, ISIJ Int., 36, 1406-1412 (1996).
  • H. Lee, S Kang, D. Um, Weld J, 77(12), 503-510 (1998).
  • H. Kim, B. Kang, Journal of KWS, 18-5, 565-572 (2000).
  • H. K. D. H. Bhadeshia, Bainite in Steels, 2nd edn, London, IOM Communications (2001).
  • H. J. Yi, Y. J. Lee, J. Y. Kim and S. S. Kang, Journal of Mech. Sci. and Tech., 25, 2185-2193 (2011).
  • H. J. Yi, Y. J. Lee, J. Y. Kim and S. S. Kang, Journal of Mech. Sci. and Tech., 25, 2185 (2011).
  • H. J. Yi, Y. J. Lee, J. Y. Kim and S. S. Kang, Journal of Mech. Sci. and Tech. 25-9, 2185~2193 (2011).
  • H. J. Kim and B. Y. Kang, J KWJS, 21, 8 (2003).
  • H. Goto, K. I. Miyazawa, K. I. Yamaguchi, S. Ogibayashi and K. Tanaka, ISIJ Int., 34, 414-419 (1994).
  • H. Bhadeshia and R. Honeycombe, Steels, microstructure and properties. Butterworth-Heinemann (2011).
  • G. Palumbo, P. J. King, K. T. Aust, U. Erb, P. C. Lichtenberger, Scripta Metallurgica et Materialia, 25-8, 1775-1780 (1991).
  • G. Krauss, principles of heat treatment of steel, 1st edn, OH, ASM (1980).
  • G. K. Padhy and Y. I. Komizo, Transaction of JWRI, 42, 39 (2013).
  • G. G. Hancook, H. H. Johnson, Trans. TMS-AIME 236, 237 (1980).
  • F. Watkinson, Welding Journal, 58-9, 417-424 (1969).
  • F. J. Barbaro, P. Krauklis and K. E. Easterling, Materials Science and Technology, 5, 1057-1068 (1989).
  • Evans, G. M., The Effect of Manganese on the Microstructure and Properties of Weld Metal Deposits, Welding Journal, 59-8, 67 (1980).
  • D. S. Tayler, G. M. Evans, Metal Construction, 15-8, 438-362 (1983).
  • D. S. Sarma, A. V. Karasev and P. G. Jonson, ISIJ Int. 49, 1063 (2009).
  • D. J. Abson, IIW Doc. No. IX-1687-92 (1992).
  • D. J Abson, A Duncan, R. J. Pageter, IIW Doc. No.1533-88 (1988).
  • D. G. Westlake, Trans. ASM 62, 1000-1006 (1969).
  • D. Brooksbank and K. W. Andrews, J. Iron Steel Inst., 210, 246-255 (1972).
  • C. Wildash, R. C. Cochrane, R. Gee, and D. J. Widgery, Proc. 5th Int. Conf. Trend in Welding Research, Pine Mountain(USA), 745, 50 (1998)
  • C. L. Choi, D. C. Hill, Welding Journal, 5Z, 232s (1978).
  • C. G. Interrante, and G. M. Pressouyre, Current Solutions to Hydrogen Problems in Steels, ASM, Washington DC, 3-16 (1982).
  • C. D. Beachem, Metallurgical transactions 3, 437-451 (1972).
  • C. A. Zapffe, C. E. Sims, Trans. AIME., 145, 225 (1941).
  • B. L. Bramfitt, Metall. Trans., 1, 1987-1995 (1970).
  • B. J. Kim, S. H. Uhm, C. H. Lee, Journal of Engineering Materials and Technology, 127, 204-213 (2005).
  • AWS A 4.3. American Welding Society (1993).
  • ASTM E92, ASTM, Philadelphia, PA, USA (2003).
  • A. Shibata, H. Yonezawa, K. Yabuuchi, S. Morito, T. Furuhara, T. Makia, Mater. Sci. Eng. A, 438–440, 241 (2006).
  • A. Shibata, H. Yonezawa, K. Yabuuchi, S. Morito, T. Furuhara, T. Makia, Mater Sci Eng A, 438 –440, 241–245 (2006).
  • A. S. Tetelman, Fundamental Aspects of stress corrosion cracking, 446-464 (1962).
  • A. R. Troiano, Transactions of the ASM, 52, 151-177 (1980).
  • A. P. Chakravarti, S. R. Balb, Welding Journal, 68-1, 1s (1989).
  • A. Ohta, O. Watanabe, K. Matsuoka, Y. Meada, N. Suzuki and T. Kubo, Weld World, 44, 19 (2000).
  • , , JSSC, 10-熔接金屬の橫割れに關する硏究 生駒 勉 101,40-54 (1975).