연구동향 분석
박사

교류 전동기의 영구자석 온도 추정과 편심 진단

현두수 2016년

논문상세정보
인용/피인용
' 교류 전동기의 영구자석 온도 추정과 편심 진단' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 영구자석 동기 전동기
  • 영구자석의 감자
  • 영구자석의 온도
  • 유도 전동기
  • 전동기 고장 진단
  • 편심
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
60 0

0.0%

' 교류 전동기의 영구자석 온도 추정과 편심 진단' 의 참고문헌

  • 에너지통계 연보
    산업통상자원부 에너지경제연구원, 2014 [2014]
  • 년도 에너지총조사
    지식경제부 에너지경제연구원, 2012 [2011]
  • “인버터를 이용한 교류 전동기의 영구 자석 감자 및 편심 진단,”
    홍종만 박사학위논문, 고려대학교, 서울, 대한민국 [2013]
  • “인버터 구동 유도 전동기의 편심 자동 진단,”
    현두수 석사학위논문, 고려대학교, 서울, 대한민국 [2011]
  • X. Huang, T. G. Habetler, R. G. Harley, and E. J. Wiedenbrug, “Using a surge tester to detect rotor eccentricity faults in induction motors,” IEEE Transaction on Industry Applications, vol. 43, no. 5, pp. 1183-1190, September/October 2007.
  • W.T. Thomson, and A. Barbour, “On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three phase induction motors,” IEEE Transactions on Energy Conversion, vol. 13, no. 4, pp. 347-357, December 1998.
  • W. le Roux, R. G. Harley, and T. G. Habetler, “Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines,” IEEE Transactions on Power Electronics, vol. 22, no. 1, pp. 322-328, January 2007.
  • Testing the rotor of a induction motor by measuring the inductance as a function of shaft position, GET-8065 rev. 1, GE Industrial Control Systems, September 1997.
  • Testing of squirrel cage rotors, Electrical Apparatus Service Association, EASA Tech. Note 23, 2003.
  • T. Wolbank, and P. E. Macheiner, “Monitoring of static an dynamic airgap eccentricity of inverter fed induciton machine drives,” in IEEE IECON, pp. 1504-1509, November 2006.
  • T. Sebastian, “Temperature Effects on Torque Production and Efficiency of PM Motors using NdFeB Magnets,” IEEE Transactions on Industry Applications, vol. 31, no. 2, pp. 353-357, March/April 1995.
  • S.-Y. Jung, and K. Nam, “PMSM Control Based on Edge-Field Hall Sensor Signals through ANF-PLL Processing,” IEEE Transactions on Industrial Electronics, vol. 58, no. 11, pp.5121-5129, November 2011.
  • S. Ruoho, and A. Arkkio, “Partial Demagnetization of Permanent Magnets in Electrical Machines Caused by an Inclined Field,” IEEE Transactions on Magnetics, vol. 44, no. 7, pp. 1773-1778, July 2008.
  • S. Rajagopalan, W. le Roux, T. G. Habetler, and R. G. Harley, “Dynamic Eccentricity and Demagnetized Rotor Magnet Detection in Trapezoidal Flux (Brushless DC) Motors Operating Under Different Load Conditions,” IEEE Transactions on Power Electronics, vol. 22, no. 5, pp. 2061-2069, September 2007.
  • S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, “Detection of Rotor Faults in Brushless DC Motors Operating Under Nonstationary Conditions,” IEEE Transactions on Industry Applications, vol. 42, no. 6, pp. 1464-1477, November/December 2006.
  • S. Nandi, S. Ahmed, and H.A. Toliyat, “Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages,” IEEE Transaction on Energy Conversion, vol. 16, no. 3, pp. 253-260, September 2001.
  • S. Nandi, R.M. Bharadwaj, and H.A. Toliyat, “Performance analysis of a three phase induction motor under mixed eccentricity condition,” IEEE Transaction on Energy Conversion, vol. 17, no. 3, pp. 392-399, September 2002.
  • S. Nandi, H. A. Toliyat, and X. Li, “Condition monitoring and diagnosis of electrical motors,” IEEE Transaction on Energy Conversion, vol. 20, no. 4, pp. 719-729, December 2005.
  • S. Morimoto, M. Sanada, and Y. Takeda, "Sinusoidal current drive system of permanent magnet synchronous motor with low resolution position sensor", in IEEE IAS Annual Meeting, pp. 9-14, 1996.
  • S. J. Chapman, Electric Machinery Fundamentals, 4th edition, McGraw-Hill Education, 2005.
  • R. Spee, and A. K. Wallace, “Remedial Strategies for Brushless DC Drive Failures,” IEEE Transactions on Industry Applications, vol. 26, no. 2, pp. 259-266, March/April 1990.
  • R. R. Schoen, and T. G. Habetler, “Effect of time-varying loads on rotor fault detection in induction machines,” IEEE Transaction on Industry Applications, vol. 31, no. 4, pp. 900- 906, July/August 1995.
  • Premium Efficiency Motor Selection and Application Guide, U.S. Department of Energy, 2014.
  • Paul Waide, and Conrad U. Brunner, Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems, International Energy Agency, 2011.
  • P.F. Albrecht, J.C. Appiarius, R.M. McCoy, E.L. Owen, and D.K. Sharma, “Assessment of the Reliability of Motors in Utility Applications – Updated,” IEEE Transactions on Energy Conversion, vol. EC-1, no. 1, pp. 39-46, March 1986.
  • P. Pillay, and R. Krishnan, “Modeling, Simulation, and Analysis of Permanent-Magnet Motor Drives, Part I: The Permanent-Magnet Synchronous Motor Drive,” IEEE Transactions on Industry Applications, vol. 25, no. 2, pp. 265-273, March/April 1989.
  • P. O'Donnell, “Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part II.” IEEE Transactions on Industry Applications, vol. IA-21, no.4, pp. 865-872, July/August 1985.
  • P. O'Donnell, “Report of Large Motor Reliability Survey of Industrial and Commercial Installations, Part I.” IEEE Transactions on Industry Applications, vol. IA-21, no.4, pp. 853-864, July/August 1985.
  • P. Milanfar, and J. H. Lang, “Monitoring the Thermal Condition of Permanent-Magnet Synchronous Motors,” IEEE Transactions on Aerospace and Electronic Systems, vol. 32, no. 4, pp. 1421-1429, October 1996.
  • P. L. Cochran, Polyphase Induction Motors, Analysis, Design, and Application, Marcel Dekker, 1989.
  • P. Campbell, “The Design and Application of High Energy Rare Earth Permanent Magnets,” in IEEE Electrical Electronics Insulation Conference and Electrical Manufacturing & Coil Winding Conference, pp. 49-57, Rosemont, IL, USA, September 1995.
  • P. Bechard, “Fault zone anlaysis - airgap,” in Motor Reliability Technical Conference, PDMA Corp., pp.37-46, 2004.
  • O.V. Thorsen, and M. Dalva, “Failure Identification and Analysis for High-Voltage Induction Motors in the Petrochemical Industry,” IEEE Transactions on Industry Applications, vol. 35, no. 4, pp. 810-818, July/August 1999.
  • O.V. Thorsen, and M. Dalva, “A Survey of Faults on Induction Motors in Offshore Oil Industry, Petrochemical Industry, Gas Terminals, and Oil Refineries,” IEEE Transactions on Industry Applications, vol. 31, no. 5, pp. 1186-1196, September/October 1995.
  • M.J. Melfi, S.D. Rogers, S. Evon, and B. Martin, “Permanent-Mganet Motors for Energy Savings in Industrial Applications,” IEEE Transactions on Industry Applications, vol. 44, no. 5, pp. 1360-1366, September/October 2008.
  • M. Nakano, H. Kometani, and M. Kawamura, “A Study on Eddy-Current Losses in Rotors of Surface Permanent-Magnet Synchronous Machines,” IEEE Transactions on Industry Applications, vol. 42, no. 2, pp. 429-435, March/April 2006.
  • M. Ganchev, C. Kral, and T. M. Wolbank, “Sensorless Rotor Temperature Estimation of Permanent Magnet Synchronous Motor under Load Conditions,” in Annual Conference on IEEE Industrial Electronics Society, pp. 1999-2004, Montreal, QC, Canada, October 2012.
  • M. Ganchev, C. Kral, and T. M. Wolbank, “Compensation of Speed Dependence in Sensorless Rotor Temperature Estimation for Permanent-Magnet Synchronous Motor,” IEEE Transactions on Industry Applications, vol. 49, no. 6, pp. 2487-2495, November/December 2013.
  • M. Ganchev, C. Kral, H. Oberguggenberger, and T. Wolbank, “Sensorless Rotor Temperature Estimation of Permanent Magnet Synchronous Motor,” in Annual Conference on IEEE Industrial Electronics Society, pp. 2018-2023, Melbourne, VIC, Australia, November 2011.
  • M. Ganchev, B. Kubicek, and H. Kappeler, “Rotor Temperature Monitoring System,” in International Conference on Electrical Machines, pp. 1-5, Rome, Italy, September 2010.
  • M. Fenger, B.A. Lloyd, and W. T. Thomson, “Development of a tool to detect faults in induction motors via current signature analysis,” in IEEE IAS/PCA Cement Industry Technical Conference, pp. 37-46, May 2003.
  • M. Blodt, J. Regnier, and J. Faucher, “Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current wigner distributions,” IEEE Transaction on Industry Applications, vol. 45, no. 6, pp. 1991-2000, Novemebr/December 2009.
  • L. Wu, X. Huang, T. G. Habetler, and R. G. Harley, “Eliminating load oscillation effects for rotor eccentricity detection in closed-loop driveconnected induction motors,” IEEE Transaction on Power Electronics, vol. 22, no. 4, pp. 1543-1551, July 2007.
  • K. Yamazaki, and A. Abe, “Loss Investigation of Interior Permanent-Magnet Motors Considering Carrier Harmonics and Magnet Eddy Currents,” IEEE Transactions on Industry Applications, vol. 45, no. 2, March/April 2009.
  • K. -C. Kim, S. -B. Lim, D. -H. Koo, and J. Lee, “The Shape Design of Permanent Magnet for Permanent Magnet Synchronous Motor Considering Partial Demagnetization,” IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3485-3487, October 2006.
  • J.P. Nozieres, and R. P. de la Bathie, “Hot Worked Nd-Fe-B Permanent Magnets: Effect of Additional Element such as Dy, Si, Ce, Ti, Co and Others,” IEEE Transactions on Magnetics, vol. 25, no. 5, pp. 4117-4119, September 1989.
  • J.-H. Jang, S.-K. Sul, J.-I. Ha, K. Ide, and M. Sawamura, “Sensorless Drive of Surface- Mounted Permanent-Magnet Motor by High-Frequency Signal Injection Based on Magnetic Saliency,” IEEE Transactions on Industry Applications, vol. 39, no. 4, pp. 1031- 1039, July/August 2003.
  • J. R. Hendershot, and T. J. E. Miller, Design of Brushless Permanent-Magnet Machines, Magna Physics Publishing, Oxford Science Publications, 1994.
  • J. R. Cameron, W. T. Thomson, and A. B. Dow, “Vibration and current monitoring for detecting airgap eccentricity in large induction motors,” IEE Proceedings B Electric Power Applications, vol. 133, no. 3, pp. 155-163, May 1986.
  • J. Pyrhonen, T. Jokinen, and V. Hrabovcova, Design of Rotating Electrical Machines, Wiley, 2008.
  • J. M. D. Coey, “Hard Magnetic Materials: A Perspective,” IEEE Transactions on Magnetics, vol. 47, no. 12, pp. 4671-4681, December 2011.
  • J. Hong, S. Park, D. Hyun, T. Kang, S. B. Lee, C. Kral, and A. Haumer, “Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors,” IEEE Transactions on Industry Applications, vol. 48, no. 3, pp. 923-932, May/June 2012.
  • J. Hong, D. Hyun, S. B. Lee, and C. Kral, “Offline Monitoring of Airgap Eccentricity for Inverter-Fed Induction Motors Based on the Differential Inductance,” IEEE Transactions on Industry Applications, vol. 49, no. 6, pp. 2533-2542, November/December 2013.
  • J. Hong, D. Hyun, S. B. Lee, J. -Y. Yoo, and K.-W. Lee, “Automated Monitoring of Magnet Quality for Permanent-Magnet Synchronous Motors at Standstill,” IEEE Transactions on Industry Applications, vol. 46, no. 4, pp. 1397-1405, July/August 2010.
  • J. Fan, C. Zhang, Z. Wang, Y. Dong, C. E. Nino, A. R. Tariq, and E. G. Strangas, “Thermal Analysis of Permanent Magnet Motor for the Electric Vehicle Application Considering Driving Duty Cycle,” IEEE Transactions on Magnetics, vol. 46, no. 6, pp. 2493-2496, June 2010.
  • J. A. Haylock, U. M. Hoefer, and A. G. Jack, “Predicting and Preventing Demagnetisation in Permanent Magnet Motor Drives,” in IET International Conference on Power Electronics, Machines and Drives, pp.474-478, Dublin, Ireland, April 2006.
  • J. -R. R. Ruiz, J. A. Rosero, A. G. Espinosa, and L. Romeral, “Detection of Demagnetization Faults in Permanent-Magnet Synchronous Motors Under Nonstationary Conditions,” IEEE Transactions on Magnetics, vol. 45, no. 7, pp. 2961-2969, July 2009.
  • IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery, IEEE Standard 62.2-2004, June 2005.
  • Hall Effect Sensing and Application, Micro Switch Sensing and Control, Honeywell Inc., [Online] Available: http://sensing.honeywell.com/ last accessed 30 October, 2015.
  • H. W. Penrose, “The Multi-Technology Approach to Motor Diagnostics”, All-Test Pro LLC, [Online] Available: http://www.alltestpro.com/articles-testimonials/ last accessed 18 May, 2015.
  • H. Nakamura, K. Hirota, M. Shimao, T. Minowa, and M. Honshima, “Magnetic Properties of Extremely Small Nd–Fe–B Sintered Magnets,” IEEE Transactions on Magnetics, vol. 41, no. 10, pp. 3844-3846, October 2005.
  • H. A. Toliyat, and G. B. Kliman, Handbook of Electric Motors, Marcel Dekker, 2004.
  • G. Salles, C. Tassoni, G. Grellet, and G. Franceschini, “Monitoring of induction motor load by neural network techniques,” IEEE Transaction on Power Electronics, vol. 15, no. 4, pp. 762-768, July 2000.
  • G. D. Demetriades, H. Z. de la Parra, E. Andersson, and H. Olsson, “A Real-Time Thermal Model of a Permanent-Magnet Synchronous Motor,” IEEE Transactions on Power Electronics, vol. 25, no. 2, pp. 463-474, February 2010.
  • F. Genduso, R. Miceli, C. Rando, and G. R. Galluzzo, “Back EMF Sensorless-Control Algorithm for High-Dynamic Performance PMSM,” IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 2092-2100, June 2010.
  • F. Caricchi, F. G. Capponi, F. Crescimbini, and L. Solero, “Sinusoidal brushless drive with low-cost linear Hall effect position sensors,” in IEEE Power Electronics Specialists Conference(PESC), vol.2, pp. 799-804, June 2001.
  • D. Reigosa, D. Fernandez, H. Yoshida, T. Kato, and F. Briz, “Permanent Magnet Temperature Estimation in PMSMs Using Pulsating High Frequency Current Injection,” in IEEE Energy Conversion Congress and Exposition, pp. 5198-5205, Pittsburgh, PA, USA, September 2014.
  • D. Hyun, S. Lee, J. Hong, and S. B. Lee, “Detection of Airgap Eccentricity for Induction Motors Using the Single-Phase Rotation Test,” IEEE Transactions on Energy Conversion, vol. 27, no. 3, pp. 689-696, September 2012.
  • D. Hyun, J. Hong, S. B. Lee, K. Kim, E. J. Wiedenbrug, M. Teska, S. Nandi, and I. T. Chelvan, “Automated Monitoring of Airgap Eccentricity for Inverter-Fed Induction Motors Under Standstill Conditions,” IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1257-1266, May/June 2011.
  • D. G. Dorrell, W. T. Thomson, and S. Roach, “Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3 phase induction motors,” IEEE Transaction on Industry Applications, vol. 33, no. 1, pp. 24-34, January/February 1997.
  • D. D. Reigosa, F. Briz, P. Garc a, J. M. Guerrero, and M. W. Degner, “Magnet Temperature Estimation in Surface PM Machines Using High-Frequency Signal Injection,” IEEE Transactions on Industry Applications, vol. 46, no. 4, pp. 1468-1475, July/August 2010.
  • D. D. Reigosa, F. Briz, M. W. Degner, P. Garc a, and J. M. Guerrero, Magnet Temperature Estimation in Surface PM Machines During Six-Step Operation,” IEEE Transactions on Industry Applications, vol. 48, no. 6, pp. 2353-2361, November/December 2012.
  • D. C. Hanselman, Brushless Permanent Magnet Motor Design, Magna Physics Publishing, 2006.
  • C. W. Cheng, H. C. Man, and F. T. Cheng, “Magnetic and Corrosion Characteristics of Nd-Fe-B Magnet with Various Surface Coatings,” IEEE Transactions on Magnetics, vol. 33, no. 5, pp. 3910-3912, September 1997.
  • C. Kral, A. Haumer, and S. B. Lee, “A Practical Thermal Model for the Estimation of Permanent Magnet and Stator Winding Temperature,” IEEE Transactions on Power Electronics, vol. 29, no. 1, pp. 455-464, January 2014.
  • B. T. Ertugrul, E. Sincar, Y. Demir, and M. Aydin, “Influence of Sintered Nd-Fe-B Magnet Corrosion on Permanent Magnet Synchronous Motor Performance,” in Annual Conference of the IEEE Industrial Electronics Society, pp. 2935-2940, Vienna, Austria, November 2013.
  • B. Stumberger, G. Stumberger, D. Dolinar, A. Hamler, and M. Trlep, “Evaluation of Saturation and Cross-Magnetization Effects in Interior Permanent-Magnet Synchronous Motor,” IEEE Transactions on Industry Applications, vol. 39, no. 5, pp. 1264-1271, September/October 2003.
  • B. -H. Lee, K. -S. Kim, J. -W. Jung, J. -P. Hong, and Y. -K. Kim, “Temperature Estimation of IPMSM Using Thermal Equivalent Circuit,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 2949-2952, November 2012.
  • A. Specht, O. Wallscheid, J. Bocker, “Determination of Rotor Temperature for an Interior Permanent Magnet Synchronous Machine Using a Precise Flux Observer,” in IEEE International Power Electronics Conference, pp. 1501–1507, Hiroshima, Japan, May 2014.
  • A. Specht, J. Bocker, “Observer for the Rotor Temperature of IPMSM,” in IEEE International Power Electronics and Motion Control Conference, pp. T4-12 - T4-15, Ohrid, Macedonia, September, 2010.
  • A. M. El-Refaie, N. C. Harris, T. M. Jahns, and K. M. Rahman, “Thermal Analysis of Multibarrier Interior PM Synchronous Machine Using Lumped Parameter Model,” IEEE Transactions on Energy Conversion, vol. 19, no. 2, pp. 303-309, June 2004.
  • A. H. Bonnett, and T. Albers, “Squirrel cage rotor options for AC induction motors,” IEEE Transaction on Industry Applications, vol. 37, no. 4, pp. 1197-1209, July/August 2001.
  • A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, “Advances in diagnostics techniques for induction machines,” IEEE Transaction on Industry Electronics, vol. 55, no. 12, pp. 4109-4126, December 2008.
  • A. A. El-Moneima, A. Geberta, F. Schneidera, O. Gutfleischa, and L. Schultza, “Grain Growth Effects on the Corrosion Behavior of Nanocrystalline NdFeB Magnets,” Corrosion Science, vol. 44, no. 5, pp. 1097-1112, May 2002.