연구동향 분석
박사

실험계획법을 이용한 핵연료 저장용기 제작용 저합금강의 최적 절삭조건에 관한 연구 = A Study on the Optimum Cutting Conditions of Production for Low Alloy Steel Fuel Storage Container using the Design of Experiment

안광우 2016년

논문상세정보
인용/피인용
' 실험계획법을 이용한 핵연료 저장용기 제작용 저합금강의 최적 절삭조건에 관한 연구 = A Study on the Optimum Cutting Conditions of Production for Low Alloy Steel Fuel Storage Container using the Design of Experiment' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 유동응력
  • 유한요소 해석
  • 존슨-쿡 모델
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
583 0

0.0%

' 실험계획법을 이용한 핵연료 저장용기 제작용 저합금강의 최적 절삭조건에 관한 연구 = A Study on the Optimum Cutting Conditions of Production for Low Alloy Steel Fuel Storage Container using the Design of Experiment' 의 참고문헌

  • 절삭력 최적화를 이용한 금형가공시 표면조도 및 형상정밀도 비교에 관한 연구
    김동후 이수용 전언찬 한민식 한국 CAD/CAM학회 추계학술발표회 논문집, pp878-881 [2012]
  • 밀링 가공 공정에서 복합실험계획법을 이용한 최적 절삭조건 결정
    권원태 김용선 한국생산제조시스템학회, Vol.20, No.3, pp.232-238 [2011]
  • 경사면 가공 경로에 따른 가공 온도와 볼엔드밀 절삭력 예측에 관한 연구
    박대균 이우현 전언찬 전정도 조명제 한국 CAD/CAM학회 추계학술발표회 논문집, pp931-937 [2011]
  • 9)Tuğrul zel, Yigit Karpat, "Identification of Constitutive Material Model Parameters for High-strain Rate Metal Cutting Conditions Using Evolutionary Computational Algorithms", Materials and Manufacturing Processes, Vol. 22, Issue 5, pp. 659-667, 2007
  • 8)Hwang, Jihong, "Determination of Mechanical Properties of Materials Under Extreme Deformation Conditions Using 2-D Orthogonal Machining", Workshop of Ultra Micro Production Technology, 2013
  • 7)Tuğrul zel, Erol Zeren, "Determination of Work Material Flow Stress and Friction for FEA of Machining Using Orthogonal Cutting Tests", Journal of Materials Processing Technology, Vol. 153–154, pp. 1019–1025, 2004
  • 6)Aviral Shrot, Martin B ker, "Determination of Johnson-Cook Parameter from Machining Simulation", Computational Material Science Vol. 52 pp. 298-304, 2012
  • 54) D. H. Kim, “Determination of flow stress of low-alloy steel using cutting test and numerical analysis”, Univercity of Dong-A, 2013
  • 53) G.H. Kim, S.C. Yang, Y.C. Park, “A Study on the Characteristics on Ultra Precision Machining of Al6061-T651”, Journal of The Korean Society of Manufacturing Process Engineers 4(1), 2005.3, pp. 43-48
  • 52) T.Y. Kim, H.G. Shin, S.J. Lee, H.G. Lee, “A Study on the Cutting Characteristics and Detection of the Abnormal Tool State in Hard Turning”, Journal of the Korean Society of Manufacturing Technology Engineers 14(6), 2005.12, pp. 16-21
  • 51) Y.M. Lee, S.I. Jang, J.W. Jun, H.H. Bae, “Evaluation of Cutting Characteristics Using Multiple Regression Analysis”, Journal of the Korean Society for Precision Engineering 21(10), 2004.10, pp. 20-25
  • 50) W.S. Choi, B.S. Sung, C.W. Kang, H.J. Mun, J.R. Kwon, “Cutting Characteristic of SNCM420H steel for Ship Engine Supply Unit”, Journal of the Korean Society of Manufacturing Technology Engineers 19(5), 2010.10, pp. 631-636
  • 5)F. E. Hauser, J. A. Simmons, and J. E. Dorn, “Strain rate Effects in Wave Propagation”, in Response of Metals to High Velocity Deformation , Metallurgical Society Conference , Vol. 9 , P.G. Shewmon and V.F. Zackay, Ed., Interscience, New York, p.93 , 1961.
  • 49) H.S. Shin, H.Y. Choi, “Evaluation of Cutting Characteristics in Bulk Metallic Glasses”, Transactions of the Korean Society of Mechanical Engineers - A 36(6), 2012.6, pp. 591-598
  • 48) J. U. Jun, J. S. Jung, H. J. Koun, M. K. Ha, “A Study on Cutting Character of Side-rake angle Adjustment at Non-ferrous Metals in Turning English Title of The Paper”, Korean Society Of Precision Engineering Autumn Conference, pp. 929-934
  • 47) Byoung-Moo Cho, Dong-Ju Lee, “A Study on Cutting Characteristics According to Cutting Direction in Ball-End Milling”, Journal of the Korean Society of Manufacturing Technology Engineers 16(5), 2007.10, pp. 191-197
  • 46) L.Z. Chi, J.S. Kwak, M.K. Ha, “Geometric Error Analysis of Surface Grinding by Design of Experiments”, Journal of the Korean Society of Manufacturing Technology Engineers 13(4), 2004.8, 1-8
  • 45) J.S. Kwak, M.K. Ha, “Optimization of Grinding Conditions and Prediction of Surface Roughness Using Taguchi Experimental Design” Journal of the Korean Society for Precision Engineering 21(7), 2004.7, 37-45
  • 44) S.H. Yoo, H.G. Shin, T.Y. Kim, S.H. Oh, S.W. Park, J.T. Kim, “The Evaluation of the Machinability on turning for Ti-6Al-4V ELI Using Design of Experiments”, KSMTE The Korean Society of Manufacturing Technology Engineers, 2013.10, pp. 204-204
  • 43) S.J. Han, J.P.l Choi, S.J. Lee, “Prediction of Chip Forms using Neural Network and Experimental Design Method”, Journal of the Korean Society for Precision Engineering 20(11), 2003.11, pp. 64-70
  • 42) P. Lim, S.Y. Park, G.E. Yang, “A Study on tool life in the high speed machining of small-size end mill by factorial design of experiments and regression model”, Journal of the Korean Society for Precision Engineering 23(2), 2006.2, pp. 73-80
  • 41) Do-Kwan Hong, Chan-Woo Ahn, Hwang-Soon Baek, Seok Chang Choi, Il-Soo Park, “A Study on the Working Condition Effecting on the Maximum Working Temperature and Surface Roughness in Side Wall End Milling Using Design of Experiment”, Journal of The Korean Society of Manufacturing Process Engineers 8(3), 2009.9, pp. 46-53
  • 40) K. J. Lee, K. T. Kim, Y. S. Kim, “Optimal Parameter Design for Al/SiC Composites using Design of Experiments”, Journal of the Korean Society for Power System Engineering 15(5), 2011.10, pp. 72-76
  • 4)H. Kolsky, “An Investigation of the Mechanical Properties of Materials at High Rate of loading”, Proc. Royal Soc. B, Vol 62, pp676, 1949.
  • 39) J.S. Paek, Y.H. Kim, Y.S. Lee, J.H. Lee, “A Study on the Springback of Sheet Metal Forming by Using Taguchi Method”, Society Of Cadcam Engineers Winter Conference, pp. 801-805
  • 38)Lee, T. H, Lim, Y. H., "A Study on Effectiveness of FEM and Analycal Method for Cutting Modeling", KSPE pp. 9-10, 2010
  • 37) M. A. Meyers, D. J. Benson, O. Vohringer, B. K. Kad, Q. Xue and H. H. Fu, "Constitutive Description of Dynamic Deformation: Physically-based Mechanisms", Material Science and Engineering A322, pp. 194-216, 2000
  • 36) Marc Andre Meyers, "Dynamic Behavior of Material", John Wiley & Sons, Inc. 1994
  • 35) Kim, K. T., Baek, U. L., "The Effect of Strain Rate and Temperature on Plastic Deformation of a Metal ", Journal of Korean Society of Mechanical Egineers, Vol. 15, No. 5, pp. 1486 - 1494, 1991
  • 34) Seo, N. S., “切削加工學”, Book of Dong Myeong publishing company, pp. 49 - 52, 2002
  • 33) Yoon, J. W., Kim. H. S., "A Study on the Effectiveness of Finite Element Method in Orthogonal Cutting", Journal of the Korean Society of Machine Tool Engineers, Vol. 19, No. 1, pp. 42-49, 2010
  • 30) Lee, H.W., and Kwon, W. T., "Determination of the Minute Region for RSM to Identify the Optimum Cutting Conditions during Turning on CNC Lathe", Journal of Mechanical Sciencs and Technology, Vol 24, No. 8, pp. 1637-1645., 2010
  • 3)B. Hopkinson, “A method of Measuring the Pressure Produced in the Detonation of Explosives or by the Impact of Bullets”, Phil trans. A, Vol 213, pp437 , 1914.
  • 29) Tsao, C. C., and Hocheng, H., "Evaluation of Thrust Force and Surface Roughness in Drilling Composite Material using Raguchi Analysis and Neural Networks", Journal of materials processing technology, Vol. 203, No. 1, pp. 342-348., 2008
  • 28)Hou, T.H, Su,c.H., andLiu,W.L., “Parameters Optimization of a Nano Particle Wet Milling Process using the Taguci Method Response Surface Method and Genetic Algorithm” Power Technology, Vol.173, No.3, pp.153-162, 2007
  • 27)Kwak, J.S,“Applciation of Taguchi and Prsponse Surface Methodologied for Geometric Error in Surface Grinding Process“ International journal of machine tools and manufacture, Vol.45, No.3,pp.327-334, 2005
  • 25)Hwang, Jihong, "Determination of Mechanical Properties of Materials Under Extreme Deformation Conditions Using 2-D Orthogonal Machining", Workshop of Ultra Micro Production Technology 2013
  • 24)Tuğrul zel, Erol Zeren, "Determination of Work Material Flow Stress and Friction for FEA of Machining Using Orthogonal Cutting Tests", Journal of Materials Processing Technology, Vol. 153–154, pp. 1019–1025, 2004
  • 23)Aviral Shrot, Martin B ker, "Determination of Johnson-Cook Parameter from Machining Simulation", Computational Material Science Vol. 52 pp. 298-304, 2012
  • 22) Chou, Y. C., Kim D.W., Chang Y.S., Cho M.W. and Hea Y. M., "Optimization of High Speed Machining Process using Constrained R-T Characteristic Curve", Proceedings of the ksmte spring conference, pp 100-105, 2003
  • 21)Tuğrul zel, Yigit Karpat, "Identification of Constitutive Material Model Parameters for High-strain Rate Metal Cutting Conditions Using Evolutionary Computational Algorithms", Materials and Manufacturing Processes, Vol. 22, Issue 5, pp. 659-667, 2007
  • 21) F. Ismail, M. A. Elbestawi. “ Generation of Milled Surfaces Including Tool Dynamics and Wear”, ASME J. of Eng. for Ind., Vol. 115, 245-252., 1993
  • 20) M. A. Elbestawi, F . Ismail, K. M. Yuen . “ Surface Topography Characterization in Finish Milling” Int. J . Mach. Tools Manufact , Vol. 34, No. 2, 245- 255. 1994
  • 2) Y. S. Lee, M. H. Choi, "A Study on the Structural Integrity Evaluation of the Dual Purpose Casks for the Spent Fuel Storage and Transpost with HANARO Irradiation Impact Test", research report of MEST, pp15-68
  • 19) K. W. Kim, "Predicting Cutting Forces in Face Milling with the Orthogonal Machining Theory", Journal of KSPE, Vol.19, No.12, pp.150~157, 2002
  • 18) H. Q. Zheng, X. P. Li, Y. S. Wong and A. Y. C. Nee, "Theoretical Modelling and Simulation of Cutting Forces in Face Milling with Cutter Runout", International Journal of Machine Tool and Manufacture, Vol.39, No.12, pp.2003∼2018, 1999
  • 17) X. P. Li, A. Y. C. Nee, Y. S. Wong and H. Q. Zheng, "Theoretical Modelling and Simulation of Milling Forces", Journal of Materials Technology, Vol.89∼90, No.1, pp.266∼272, 1999
  • 16) H. T. Young, P. Mathew and P. L. B. Oxley,"Predicting Cutting Forces in Face Milling", International Journal of Machine Tool and Manufacture, Vol.34, No.6, pp.771∼783, 1994
  • 15) E. J. HYUN, Y. H. JUNG, "Chip Load Prediction forBallEnd Mill", KSPE Spring Conference, pp.1014∼1018, 1999
  • 14) K. Y. LEE, M. C. KANG, J. S. KIM, "The Prediction of Cutting Force and Surface Topography by Dynamic Force Modelin End Milling", Journal of KSPE, Vol.14, No.4, pp.38∼45, 1997
  • 13) S. Y. LEE, Y. M. IM, "Prediction and Experiments of Cutting Forces in End Milling",Journal of KSMTE, Vol.13, No.4, pp.9∼15, 2004
  • 12)M Agmell, A Ahadi, and J-E Stahl, “A Fully Coupled Thermomechanical Two-dimensional Simulation Model for Orthogonal Cutting: Formulation and Simulation“, Journal of Engineering manufacture, 2011
  • 11)Mahmoud Shatla, , Christian Kerk, Taylan Altan, "Process Modeling in Machining. Part I: Determination of Flow Stress Data.", International Journal of Machine Tools and Manufacture, Vol. 41, Issue 10, pp. 1511–1534, 2001
  • 10)Jihoon Hwang, Naksoo Kim, Hyungil Lee, Dongcheol Kim, "Determination of the Flow Stress of Zicaloy-4 under the High Strain-rate Condition Using Slot Milling Test", KSME 12, PD048 pp. 97-98, 2012
  • 1) K.C. Kim, J.I. Suk and H.K. Kwon, “Evaluation of Dynamic Fracture Toughness for the Shipping Cask made of SA350 LF3 steel”, KSPE Autumn Conference, pp192-197