연구동향 분석
박사

Performance Based Evaluation of Concrete for Strength and Durability Considering Curing under Extreme Conditions Produced by Climate Change : 기후변화에 의한 극한조건에서 양생되어진 콘크리트 강도와 내구성의 성능중심평가

Kim, Tae Kyun 2016년

논문상세정보
인용/피인용
' Performance Based Evaluation of Concrete for Strength and Durability Considering Curing under Extreme Conditions Produced by Climate Change : 기후변화에 의한 극한조건에서 양생되어진 콘크리트 강도와 내구성의 성능중심평가' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 토목 공학
  • Performance Based Evaluation
  • Satisfaction Curve
  • carbonationresistance
  • chloride diffusion coefficient
  • climate change
  • compressive strength
  • freeze and thaw resistance
  • relative dynamic elastic modulus
  • splitting tensile strength
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
1,509 0

0.0%

' Performance Based Evaluation of Concrete for Strength and Durability Considering Curing under Extreme Conditions Produced by Climate Change : 기후변화에 의한 극한조건에서 양생되어진 콘크리트 강도와 내구성의 성능중심평가' 의 참고문헌

  • Villagr n Zaccardi, Y.A., B rtora, A. and Di Maio, A.A. (2013). “Temperature and humidity influences on the on-site active marine corrosion of reinforced concrete elements.” Materials and Structures, Vol. 46, No. 9, pp. 1527-1535.
  • Vijai, K., Kumutha, R. and Vishnuram, B. G. (2010). “Effect of types of curing on strength of geopolymer concrete.” International Journal of the Physical Sciences, Vol. 5 No. 9, pp. 1419-1423.
  • The Mathworks Inc. (2002), "Matlab Manual", Version 6.5
  • Stoker, T.F., Qin, D., Plattner, G-K., Tignor, M. Allen, S.K., Boschung, J., Xia, Y., Bex, V., and Midgley, P.M. (eds), (2013), "The Physical Science Basis. Contributions of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change", IPCC, Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA.
  • Singhal, A. and Kiremidjian, A.S. (1998), "Bayesian Updating of Fragilities with Application to RC Frames", Journal of Structural Engineering, vol. 124, no. 8, pp. 922-929.
  • Singhal, A. and Kiremidjian, A.S. (1996), "Method for Probabilistic Evaluation of Seismic Structural Damage", Journal of Structural Engineering, vol. 122, no. 12, pp. 1459-1467.
  • Singhal, A. and Kiremidjian, A.S. (1996), "Method for Earthquake Motion Damage Relationships with Application to Reinforced Concrete Frame", NCEER-97-0008 Technical Report, National Center for Earthquake Engineering Research(NCEER), Richmond, CA, USA, No. 119.
  • Shinozuka, M., Feng, M.Q., Lee, J.H. and Naganuma, T. (2000), "Statistical Analysis of Fragility Curves", Journal of Engineering and Mechanic, vol. 126, no. 12, pp. 1224-1231.
  • Shinozuka, M., Feng, M.Q., Kim, H., Uzawa, T. and Ueda, T. (2001), "Statistical Analysis of Fragility Curves, Technical Report", Multidisciplinary Center for Earthquake Engineering, Research(MCEER), Buffalo, NY, USA.
  • Popovics, S., and Ujhelyi, J. (2008). "Contribution to the concrete strength versus water-cement ratio relationship." Journal of Materials in Civil Engineering, Vol. 20 No. 7, pp. 459-463.
  • Pietro, L., Klaas, B., Ippei, M. (2001). “Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete”, Cement and Concrete Research, Vol. 31, No 12, PP 1867-1872.
  • Phan, H.D., Kim, J.H.J., Yi, N.H., You, Y.J., and Kim, J.W. (2012), "Strength Targeted PBMD of HSC based on One-Parameter Bayesian Probabilistic Method", Journal of Advanced Concrete Technology, Vol. 10, No. 4, pp. 137-150.
  • Phan, H.D., Kim, J.H.J., Jeong, H.S., and Kim, B.Y. (2007), "Bayesian Updating of Satisfaction Curve with Application to Concrete Material", Proceedings Journal of KSCE, pp. 353-356 (In Korean)
  • Phan, H.D. (2010), "Development and Evaluation of Performance Based Mixture Design Method for Concrete Mix Proportion Design", Dissertation, pp. 70-85.
  • Pelisser, F., Neto, A. B. D. S. S., La Rovere, H. L. and de Andrade Pinto, R. C. (2010). “Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking.” Construction and Building Materials, Vol. 24, No. 11, pp. 2171-2176.
  • Park, H.W., Song, H.W., Back, J.M., Woo, J.T., and Nam, J.W. (2003). “An Experimental Study on Durability Evaluation of Nano Composite Hybrid Polymer Type Coatings Applied Concrete.” Proceedings Journal of the Korea Concrete Institute, Vol. 15, No. 1, pp. 687-692. (In Korean)
  • Padron. I., and Zollo. R.F., (1990). “Effect of Synthetic Fibers on Volume Stability and Cracking of Portland Cement Concrete and Mortar.” ACI Material Journal, Vol. 87, No. 4, pp. 327-332.
  • Pachauri, P.K., Meyer, L.A. (eds), (2014), "Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change", IPCC, Synthesis Report, Geneva, Switzerland.
  • Ortiz, J., Aguado, A., Agull , L. and Garc a, T. (2005). “Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions.”, Cement and Concrete Research, Vol. 35, No. 10, pp. 1970-1979.
  • Najm, H., and Balaguru P. (2002). “Effect of Large-Diameter Polymeric Fibers on Shrinkage Cracking of Cement Composites.” ACI Material Journal, Vol. 99, No. 4, pp. 345-351.
  • Myong, S.J. (2009), "Assessing Vulnerability to Climate Change of the Physical Infrasructure in Korea and Developing Adaptation Strategies", Korea Environment Institute.
  • Moon, H.Y., Kim, H.S. and Choi, D.S. (2003), "The Characteristic Capillary Pore and Choloride Diffusivity by Electrical Difference into Various Concrete", Journal of the Korea Society of Civil Engineers, Vol. 3, No. 5A, pp. 969-976. (In Korean)
  • Mindess, S., Young, J.F., and Darwin, D. (2003). "Concrete", second edition, Pearson Education, Upper Saddle River, NJ, USA.
  • Microsoft Fortran. (1994), Microsoft Developer Studio
  • Mehta, P.K., and Paulo, J.M.M. (2006). "CONCRETE(Microstructure, Properties, and Materials)", 3rd edition, McGrawHill, Columbus, OH, USA.
  • Mao, L., Mitsuki, I. and Ippei, M. (2015). “Mechanism of change in splitting tensile strength of concrete during heating or drying up to 90 C.” Journal of Advanced Cocrete Technology, Vol. 13 No. 9, pp. 94-102.
  • Lee, K.S. (2012). “Deflection Prediction of Fiber Reinforced Concrete Beam Using Fracture Energy.” Dissertation, pp. 26. (In Korean)
  • Lee, D.G., Kim, M.Y., Yang, E.I., Yi, S.T., and Han, S.H. (2006). “Comparison of High-Durability Materials for Prevention of Corrosion in Marine Concrete Structures.” Proceedings Journal of the Korea Concrete Institute, Vol. 18, No. 2, pp. 581-584. (In Korean)
  • Lee, C.Y., Lee, I.D., Kim, K.W. and Bae, S.Y. (1998), "Resistance of Freeze-Thaw and Strength Development of Recycled Concrete", Journal of the Korea Concrete Institute, Vol. 10, No. 4, pp. 163-169. (In Korean)
  • Lee, C.Y., Kim, H.S., Kim, J.C., Cheong, H.M. and Ahn, T.S. (2008), "Comparison of Test Methods for Evaluation of Chloride Diffusion Coefficient in Concrete", Proceedings Journal of the Korea Concrete Institute, Vol. 20, No. 1, pp. 581-584. (In Korean)
  • Lee, B.D., Kim, H.J. and Kang, H.J. (2008), "Affecting Analysis of Air Content on the Freeze-Thaw Durability of Concrete", Proceedings Journal of the Korea Concrete Institute, Vol. 20, No. 1, pp. 565-568. (In Korean)
  • Kwon, S.J., Park, S.S. and Nam, S.H. (2007), "A Suggestion for Carbonation Prediction Using Domestic Field Survey Data of Carbonation", Korea Institute for Structure Maintenance and Inspection, KSMI, Vol. 11, No. 5, pp. 81~88. (In Korean)
  • Kronl f, A., Leivo, M. and Sipari, P. (1995). “Experimental study on the basic phenomena of shrinkage and cracking of fresh mortar.” Cement and Concrete Research, Vol. 25 No. 8, pp. 1747-1754.
  • Korea Standard (KS) (2014), KS F 2403 Standard test method for making and curing concrete specimens, Korea Standards Association (In Korean).
  • Korea Standard (KS) (2013), KS F 2456 Standard test method for resistance of concrete to rapid freezing and thawing, Korea Standards Association (In Korean).
  • Korea Standard (KS) (2013), KS F 2437 Standard test method for dynamic modulus of elasticity, rigidity and dynamic Poisson`s ratio of concrete specimens by resonance vibration, Korea Standards Association (In Korean).
  • Korea Standard (KS) (2010), KS F 2584 Standard test method for accelerated carbonation of concrete, Korea Standards Association (In Korean).
  • Korea Standard (KS) (2010), KS F 2405 Method of Test for Compressive Strength of Concrete, Korea Standards Association (In Korean).
  • Korea Standard (KS) (2006), KS F 2423 Method of Test for Splitting Tensile Strength of Concrete, Korea Standards Association (In Korean).
  • Kim, T.S., Jung, S.H., Choi, Y.C. and Song, H.W. (2009), "An Experimental Study on Relation between Chloride Diffusivity and Microstructural Characteristics for GGBS Concrete", Journal of the Korea Concrete Institute, Vol. 21, No. 5, pp. 639-647. (In Korean)
  • Kim, T.K., Choi, S.J., Kim, J.H.J., and Kim, B.Y. (2015), "Performance Based Evaluation of Concrete Strength under Various Curing Conditions to Investigate Climate Change Effects", Sustainability of MDPI, Vol. 7, pp. 10052-10077.
  • Kim, T. K., Choi, S. J., Shim, H. B., Ahn, T. S. and Kim, J.H.J. (2013), "Satisfaction Curve Performance Based Design Method Evaluation of Concrete Specimen Subjected to Climate Change", Proceedings Journal of the Korea Concrete Institute, Vol. 25, No.1, pp. 131-132. (In Korean)
  • Kim, R.H., Kim, G.Y., Lee, B.K., Shin, K.S. and Song, G.Y. (2015), "Effects of Micropores on the Freezing-Thawing Resistance of High Volume Slag Concrete", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 19, No. 4, pp. 67-74. (In Korean)
  • Kim, J.H.J., Yi, N.H., Phan, D.H., Kim, S.B. and Lee, K.W. (2010)　 "Development of Performance Based Resistance Capacity Evaluation Method for RC Compression Member under Vehicle Impact Load", Journal of the Korea Concrete Institute, Vol. 22, No. 4, pp. 535-546. (In Korean)
  • Kim, J.H.J., Phan, H.D., Yi, N.H., Kim, S.B., and Jeong, H.S. (2011), "Application of the One Parameter Bayesian Method as the PBMD for Concrete Mix Proportion Design", Magazine of Concrete Research, Vol. 63, No. 1, pp. 31-47.
  • Kim, J.H.J., Phan, D.H., Oh, I.S. and Lee, K.S. (2010), "Development of Performance Based Mix Design Method Using Single Parameter Bayesian Method", Journal of the Korea Concrete Institute, Vol. 22, No. 4, pp. 499-510. (In Korean)
  • Kim, J.H.J., Phan, D.H., Kim, B.Y., Choi, J.W., Han, D.S. (2012), “Development of Satisfaction Curves to Evaluate Concrete Mix Design Performance using a Bayesian Probabilistic Method”, Construction and Building Materials. Vol. 27, No. 1, pp. 578-584.
  • Kim, J.H.J., Phan, D. H., Lee, K. S., Yi, N.H. and Kim, S. B. (2010), "Development of PBD Method for Concrete Mix Proportion Design Using Bayesian Probabilistic Method", Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 171-177. (In Korean)
  • Kim, J.H., Oh, K.C. and Park, S.B. (2008), "A study on carbonation velocity for concrete structures", Korea Institute for Structure Maintenance and Inspection, KSMI, Vol. 12, No. 2, pp. 163~170. (In Korean)
  • Kang, W.S. (2004), The Impacts and Measures of Climate Change on Construction Industry, Construction Economy Research Institute of Korea. (In Korean)
  • KMA, Korea Meteorological Administration (In Korean)
  • KCI (2005) Performance Based Design - KCI Report, Seoul, Korea Concrete Institute(KCI). (In Korean)
  • Jung, J.D. (1992). “Present Status of Researches on Carbonation of Concrete.” Journal of the Korea Concrete Institute, Vol. 4, No. 1. pp. 17-24. (In Korean)
  • Jung, H.J. and Kim, G.S. (2010), "A Long-term Durability Prediction for RC Structures Exposed to Carbonation Using Probabilistic Approach", Korea Institute for Structure Maintenance and Inspection, KSMI, Vol. 14, No. 5, pp. 119-127. (In Korean)
  • Jun, H.Y., Kim, T.K., Lee, S.W. and Kim, J.H.J. (2011), "Application of Performance Based Mixture Design (PBMD) for Self Compacting Concrete", Proceedings Journal of the Korea Concrete Institute, Vol. 23, No.1, pp. 571-572. (In Korean)
  • Jiang, J. and Yuan, Y. (2013). “Relationship of moisture content with temperature and relative humidity in concrete.” Magazine of Concrete Research, Vol. 65, No. 11, pp. 685-692.
  • Jeong, J. H. and Zollinger, D. G. (2005). “Environmental effects on the behavior of jointed plain concrete pavements.” Journal of Transportation Engineering, Vol. 131 No. 2, pp. 140-148.
  • Holt, E. and Leivo, M. (2004). “Cracking risks associated with early age shrinkage.” Cement and Concrete Composites, Vol. 26, No. 5, pp. 521-530.
  • Ho, D. W. S., Cui, Q. Y. and Ritchie, D. J. (1989). “The influence of humidity and curing time on the quality of concrete.”, Cement and Concrete Research, Vol. 19, No. 3, pp. 457-464.
  • Gibson, E. J. (1982), Working with the performance Approach in building, CIB state of the Art report.
  • Felekoglu, B., Turkel, S., and Baradan, B. (2007). “Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete.” Building and Environment, Vol. 42, No. 4, pp. 1795-1802.
  • Emilio, B.A., Frank, S., Mark, G.S., and Xiaoming, W. (2013). “Influence of global warming on durability of corroding RC structures: A probabilistic approach.” Engineering Structures, Vol. 51, pp. 259-266.
  • Choi, Y.S., Won, M.S., Yi, S.T. and Yang, E.I. (2012), "Characteristics of Pore Structure and Chloride Penetration Resistance of Concrete Exposed to Freezing-Thawing", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 16, No. 6, pp. 73-81. (In Korean)
  • Choi, S., Lee, K.M., Jung, S.H., and Kim, J.H. (2009). “A Study on the Carbonation Characteristics of Fly Ash Concrete by Accelerated Carbonation Test.” Journal of the Korea Concrete Institute, Vol. 21, No. 4, pp. 449-455. (In Korean)
  • Choi, D.S. and Choi, J.J. (2009), "Experimental Study on the Time-dependent Property of Chloride Diffusivity of Concrete", Journal of the Korea Society of Civil Engineers, Vol. 29, No. 4A, pp. 365-371. (In Korean)
  • Chen, Z.T., Li, M.G., Yang, Y.Z., and Liu, Q., (2014). “Restrained shrinkage behavior of concrete under different environmental conditions.” Advanced Materials Research, Vol. 941/944, No. 2, pp. 835-841.
  • CIB. (2005), Performance Based Building - Report of EC 5th Framework, Rotterdam, International Council for Research and Innovation in Building and Construction
  • CIB. (1997), Performance Based Building Codes - Report TG11, Rotterdam, International Council for Research and Innovation in Building and Construction.
  • CIB. (1993), Some Examples of The Application of The Performance Concept in Building, Rotterdam, International Council for Research and Innovation in Building and Construction.
  • CIB. (1988), Performance Requirements in Buildings, Rotterdam, International Council for Research and Innovation in Building and Construction.
  • CIB. (1982), Working with The Performance Concept in Building - Report W50, Rotterdam, International Council for Research and Innovation in Building and Construction.
  • Bushlaibi, A. H. and Alshamsi, A. M. (2002). “Efficiency of curing on partially exposed high-strength concrete in hot climate.”, Cement and Concrete Research, Vol. 32, No. 6, pp. 949-953.
  • Box, G.E.P. and Tiao, G.C. (1973), Bayesian Inference in Statistical Analysis, New York, John Wiley & Son.
  • Bakhareva, T Sanjayana, J.G., Chengb, Y.-B. (1999). “Effect of elevated temperature curing on properties of alkali-activated slag concrete”, Cement and Concrete Research, Vol. 29, No 10, PP 1619-1625.
  • Arribas, I., Vegas, I., San-Jose, J.T., and Manso, J.M. (2014). “Durability studies on steelmaking slag concretes.” Materials & Design, Vol. 63, pp. 168-176.
  • Ang, A.H.S. and Tang, W.H. (1984), Probability Concept in Engineering Planning and Design, New York, John Wiley & Son.
  • Alqam, M., and Alkam, M.K. (2014). “Temperature and moisture distribution inside a circular concrete column during the early stages of hydration.” Canadian journal of civil engineering, Vol. 41, No. 6, pp. 556-568.
  • Almusallam, A. A. (2001). “Effect of environmental conditions on the properties of fresh and hardened concrete.”, Cement and Concrete Composites, Vol. 23, No. 4, pp. 353-361.
  • Aldea, C. M., Young, F., Wang, K. and Shah, S. P. (2000). “Effects of curing conditions on properties of concrete using slag replacement.”, Cement and Concrete Research, Vol. 30, No. 3, pp. 465-472.
  • Al-Fadhala, M. and Hover, K. C. (2001). “Rapid evaporation from freshly cast concrete and the Gulf environment.”, Construction and Building Materials, Vol. 15 No. 1, pp. 1-7.