연구동향 분석
박사

A STUDY ON SMALL SCALE MECHANICAL BEHAVIOR FOR DEFORMATION ANALYSIS OF DUPLEX STAINLESS STEEL : 2상 스테인리스의 변형 해석을 위한 미소 스케일 기계적 거동에 대한 연구

김용민 2015년

논문상세정보
인용/피인용
' A STUDY ON SMALL SCALE MECHANICAL BEHAVIOR FOR DEFORMATION ANALYSIS OF DUPLEX STAINLESS STEEL : 2상 스테인리스의 변형 해석을 위한 미소 스케일 기계적 거동에 대한 연구' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • carbon coat patterning method
  • deformation analysis
  • digital image correlation (dic)
  • dislocation nucleation energy (dne)
  • duplex stainless steel (dss)
  • elasto-plastic transition stress
  • electron backscatter diffraction (ebsd)
  • grain average misorientation (gam)
  • hertzian contact theory
  • in-situ ebsd
  • in-situ sem
  • kernel average misorientation (kam)
  • local strain
  • misorientation
  • nanoindentation
  • neutron diffraction
  • orientational stability
  • pop-in
  • quantitative strain analysis
  • scanning electron microscope (sem)
  • speckle patterning method
  • texture
  • time of flight (tof) analysis
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
298 0

0.0%

' A STUDY ON SMALL SCALE MECHANICAL BEHAVIOR FOR DEFORMATION ANALYSIS OF DUPLEX STAINLESS STEEL : 2상 스테인리스의 변형 해석을 위한 미소 스케일 기계적 거동에 대한 연구' 의 참고문헌

  • [1] R.A. Lula, J.G. Parr, Stainless steel, American Society for Metals, 1986.
  • Z.P. Lu, T. Shoji, F.J. Meng, H. Xue, Y.B. Qiu, Y. Takeda, K. Negishi,Corros Sci, 53 (2011) 1916-1932.
  • Z.J. Wang, Y. Liu, J Mater Process Tech, 210 (2010) 1536-1544.
  • Y.S. Han, S.H. Hong, Mat Sci Eng a-Struct, 266 (1999) 276-284.
  • Y.D. Wang, R. Lin Peng, X.L. Wang, R.L. McGreevy, Acta Mater, 50(2002) 1717-1734.
  • Y.D. Wang, H. Tian, A.D. Stoica, X.L. Wang, P.K. Liaw, J.W. Richardson, Nat Mater, 2 (2003) 101-106.
  • Y. Zhou, K.W. Neale, L.S. Toth, International Journal of Plasticity, 9(1993) 961-978.
  • Y. Zhang, T.D. Topping, E.J. Lavernia, S.R. Nutt, Metallurgical andMaterials Transactions A: Physical Metallurgy and Materials Science, 45(2014) 47-54.
  • Y. Yamamoto, M.P. Brady, Z.P. Lu, P.J. Maziasz, C.T. Liu, B.A. Pint,K.L. More, H.M. Meyer, E.A. Payzant, Science, 316 (2007) 433-436.
  • Y. Tomota, P. Lukas, S. Harjo, J.H. Park, N. Tsuchida, D. Neov, ActaMater, 51 (2003) 819-830.
  • Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai,Y. Morii, Acta Mater, 52 (2004) 5737-5745.
  • Y. Maehara, Y. Ohmori, Metall Trans A, 18 (1987) 663-672.
  • Y. Maehara, T Iron Steel I Jpn, 27 (1987) 705-712.
  • Y. Maehara, Metall Trans A, 22 (1991) 1083-1091.
  • X.L. Cai, J. Feng, W.S. Owen, Metallurgical Transactions A, 16 (1985)1405-1415.
  • X. Zhang, A. Misra, H. Wang, M. Nastasi, J.D. Embury, T.E. Mitchell,R.G. Hoagland, J.P. Hirth, Appl Phys Lett, 84 (2004) 1096-1098.
  • W.P. Davey, Phys Rev, 25 (1925) 753-761.
  • W.H. Peters, W.F. Ranson, Optical Engineering, 21 (1982) 427-431.
  • W.C. Oliver, G.M. Pharr, J Mater Res, 7 (1992) 1564-1583.
  • W.C. Oliver, G.M. Pharr, J Mater Res, 19 (2004) 3-20.
  • W. Zieli?ski, W. ?wiatnicki, M. Barstch, U. Messerschmidt, MaterialsChemistry and Physics, 81 (2003) 476-479.
  • V.G. Gavriljuk, H. Berns, C. Escher, N.I. Glavatskaya, A. Sozinov, Y.N. Petrov, Mat Sci Eng a-Struct, 271 (1999) 14-21.
  • V. Gavriljuk, H. Berns, High Nitrogen Steels: Structure, Properties,Manufacture, Applications, Springer Berlin Heidelberg, 2013.
  • U.K. Mudali, B. Raj, High Nitrogen Steels and Stainless Steels:Manufacturing, Properties and Applications, Alpha Science International,2004.
  • T.H. de Keijser, J.I. Langford, E.J. Mittemeijer, A.B.P. Vogels, Journalof Applied Crystallography, 15 (1982) 308-314.
  • T.H. Lee, H.Y. Ha, J.Y. Kang, B. Hwang, W. Woo, E. Shin, Scripta Mater,67 (2012) 141-144.
  • T.H. Lee, E. Shin, C.S. Oh, H.Y. Ha, S.J. Kim, Acta Mater, 58 (2010)3173-3186.
  • T.H. Courtney, Mechanical Behavior of Materials: Second Edition,Waveland Press, 2005.
  • T.H. Ahn, C.S. Oh, K. Lee, E.P. George, H.N. Han, J Mater Res, 27(2012) 39-44.
  • T.G. Nieh, D.R. Lesuer, C.K. Syn, Mat Sci Eng a-Struct, 202 (1995) 43-51.
  • T.E. Maitland, Ethnic Dis, 17 (2007) 313-319.
  • T. de Keijser, E.J. Mittemeijer, H.C.F. Rozendaal, Journal of AppliedCrystallography, 16 (1983) 309-316.
  • T. Ohmura, K. Tsuzaki, J Phys D Appl Phys, 41 (2008).
  • T. Maitland, S. Sitzman, Scanning Microscopy for NanotechnologyTechniques and Applications, (2007) 41-75.
  • S.R. McNeill, M.A. Sutton, W.J. Wolters, W.H. Peters, Image VisComput, 1 (1983) 1333-1339.
  • S.M. Teus, V.N. Shivanyuk, B.D. Shanina, V.G. Gavriljuk, Phys StatusSolidi A, 204 (2007) 4249-4258.
  • S.I. Wright, M.M. Nowell, D.P. Field, Microscopy and Microanalysis, 17(2011) 316-329.
  • S. Yoneyama, A. Kitagawa, S. Iwata, K. Tani, H. Kikuta, ExperimentalTechniques, 31 (2007) 34-40.
  • S. Shim, H. Bei, E.P. George, G.M. Pharr, Scripta Mater, 59 (2008)1095-1098.
  • S. Pathak, S. R. Kalidindi, Mat Sci Eng R, 91 (2015) 1-36.
  • S. Lin, H. Ledbetter, Mat Sci Eng a-Struct, 167 (1993) 81-85.
  • S. Harjo, Y. Tomota, P. Lukas, D. Neov, M. Vrana, P. Mikula, M. Ono,Acta Mater, 49 (2001) 2471-2479.
  • S. Harjo, Y. Tomota, M. Ono, Acta Mater, 47 (1998) 353-362.
  • S. Frechard, F. Martin, C. Clement, J. Cousty, Materials Science andEngineering A, 418 (2006) 312-319.
  • S. Bugat, J. Besson, A.F. Gourgues, F. N'Guyen, A. Pineau, Mat Sci Enga-Struct, 317 (2001) 32-36.
  • S. Aubry, K. Kang, S. Ryu, W. Cai, Scripta Mater, 64 (2011) 1043-1046.
  • R.P. Reed, R.E. Schramm, J Appl Phys, 45 (1974) 4705-4711.
  • R.L. Peng, G. Chai, N. Jia, Y.D. Wang, S. Johansson, Fatigue andFracture of Engineering Materials and Structures, 31 (2008) 892-901.
  • R.C. Gibson, H.W. Hayden, J.H. Brophy, Asm Trans Q, 61 (1968) 85-&.
  • R.C. Gibson, H.W. Hayden, J.H. Brophy, Asm Trans Q, 60 (1967) 565-&.
  • R.A. Schwarzer, D.P. Field, B.L. Adams, M. Kumar, A.J. Schwartz,Electron Backscatter Diffraction in Materials Science, (2009) 1-20.
  • R. Yoda, T. Yokomaku, N. Tsuji, Materials Characterization, 61 (2010)913-922.
  • R. Magdowski, F. Vaillant, C. Amzallag, M.O. Speidel, Proc. of the 8thIntl. Symp. on Environmental Degradation of Materials in Nuclear PowerSystems-water Reactors, (1997) 333-338.
  • R. M'Saoubi, L. Ryde, Materials Science and Engineering A, 405 (2005)339-349.
  • R. Badji, T. Chauveau, B. Bacroix, Mat Sci Eng a-Struct, 575 (2013) 94-103.
  • P.J. Jacques, Q. Furnemont, F. Lani, T. Pardoen, F. Delannay, ActaMater, 55 (2007) 3681-3693.
  • P.J. Buchanan, V. Randle, P.E.J. Flewitt, Scripta Mater, 37 (1997) 1511-471518.
  • P. Zhou, K.E. Goodson, Optical Engineering, 40 (2001) 1613-1620.
  • P. Scardi, M. Leoni, R. Delhez, Journal of Applied Crystallography, 37(2004) 381-390.
  • P. Hedstrom, U. Lienert, J. Almer, M. Oden, Scripta Mater, 56 (2007)213-216.
  • P. Hedstrom, U. Lienert, J. Almer, M. Oden, Mater Lett, 62 (2008) 338-41340.
  • P. Evrard, A. El Bartali, V. Aubin, C. Rey, S. Degallaix, D. Kondo,International Journal of Solids and Structures, 47 (2010) 1979-1986.
  • P. Doumalin, M. Bornert, Interferometry in Speckle Light, Theory andApplications, (2000) 67-74.
  • P. Dawson, D. Boyce, S. MacEwen, R. Rogge, Metallurgical andMaterials Transactions A: Physical Metallurgy and Materials Science, 31(2000) 1543-1555.
  • O. Muransky, P. Sittner, J. Zrnik, E.C. Oliver, Acta Mater, 56 (2008)3367-3379.
  • N. Rupin, Deformation a Chaud de Materiaux Biphases: ModerationsTheoriques et Confrontations Experimentales, (2007).
  • N. Ridley, Mater Sci Tech Ser, 6 (1990) 1145-1156.
  • N. Jia, R.L. Peng, G.C. Chai, S. Johansson, Y.D. Wang, Mat Sci Eng a-Struct, 491 (2008) 425-433.
  • N. Jia, R.L. Peng, D.W. Brown, B. Clausen, Y.D. Wang, Metall MaterTrans A, 39A (2008) 3134-3140.
  • N. Jia, R. Lin Peng, Y.D. Wang, S. Johansson, P.K. Liaw, Acta Mater, 56(2008) 782-793.
  • M.P. Miller, J.V. Bernier, J.S. Park, A. Kazimirov, Review of ScientificInstruments, 76 (2005) 1-11.
  • M.A. Tschopp, B.B. Bartha, W.J. Porter, P.T. Murray, S.B. Fairchild,Metallurgical and Materials Transactions A: Physical Metallurgy andMaterials Science, 40 (2009) 2363-2368.
  • M. Mineur, P. Villechaise, J. Mendez, Mat Sci Eng a-Struct, 286 (2000)257-268.
  • M. Kamaya, T. Kitamura, International Journal of Fracture, 124 (2003)201-213.
  • M. Kamaya, Materials Characterization, 60 (2009) 125-132.
  • M. Kamaya, A.J. Wilkinson, J.M. Titchmarsh, Nuclear Engineering andDesign, 235 (2005) 713-725.
  • M. Kamaya, A.J. Wilkinson, J.M. Titchmarsh, Acta Materialia, 54 (2006)151539-548.
  • M. Kamaya, A.J. Wilkinson, J.M. Titchmarsh, Acta Mater, 54 (2006)539-548.
  • M. Bornert, F. Vales, H. Gharbi, D. Nguyen Minh, Strain, 46 (2010) 33-46.
  • L.E. Hernandez-Castillo, Determination of micro-scale strain distributionin hot-worked steel microstructures, (2005).
  • L. Weber, P.J. Uggowitzer, Mat Sci Eng a-Struct, 242 (1998) 222-229.
  • L. Duprez, B.C. De Cooman, N. Akdut, Zeitschrift fuer50Metallkunde/Materials Research and Advanced Techniques, 93 (2002) 236-243.
  • L. Allais, M. Bornert, T. Bretheau, D. Caldemaison, Acta Metallurgica EtMaterialia, 42 (1994) 3865-3880.
  • K.Z. Baba-Kishi, Journal of Materials Science, 37 (2002) 1715-1746.
  • K.K. Park, S.T. Oh, S.M. Baeck, D.I. Kim, J.H. Han, H.N. Han, S.H. Park, C.G. Lee, S.J. Kim, K.H. Oh, in: Materials Science Forum, 2002, pp. 571-576.
  • K.H. Lo, C.H. Shek, J.K.L. Lai, Mat Sci Eng R, 65 (2009) 39-104.
  • K. Tsuzaki, X.X. Huang, T. Maki, Acta Mater, 44 (1996) 4491-4499.
  • K. Mino, R. Imamura, H. Koiwai, C. Fukuoka, Advanced EngineeringMaterials, 3 (2001) 922-924.
  • K. Masayuki, Ultramicroscopy, 111 (2011) 1189-1199.
  • K. Lee, S.J. Park, Y.S. Choi, S.J. Kim, T.H. Lee, K.H. Oh, H.N. Han,Scripta Mater, 69 (2013) 618-621.
  • K. Fujiyama, K. Mori, D. Kaneko, H. Kimachi, T. Saito, R. Ishii, T. Hino,International Journal of Pressure Vessels and Piping, 86 (2009) 570-577.
  • J.Y. Kang, B. Bacroix, H. Regle, K.H. Oh, H.C. Lee, Acta Materialia, 55(2007) 4935-4946.
  • J.Y. Kang, B. Bacroix, H. Regle, K.H. Oh, H.C. Lee, Acta Mater, 55(2007) 4935-4946.
  • J.W.L. Pang, T.M. Holden, T.E. Mason, Acta Mater, 46 (1998) 1503-461518.
  • J.W. Simmons, Mat Sci Eng a-Struct, 207 (1996) 159-169.
  • J.V. Bernier, M.P. Miller, Journal of Applied Crystallography, 39 (2006)358-368.
  • J.R. Rice, R. Thomson, Philos Mag, 29 (1974) 73-97.
  • J.R. Morris, H. Bei, G.M. Pharr, E.P. George, Phys Rev Lett, 106 (2011)165502.
  • J.Q. Zhao, P. Zeng, L.P. Lei, Y. Ma, Optics and Lasers in Engineering,50 (2012) 473-490.
  • J.P. Hirth, J. Lothe, Theory of Dislocations, Krieger Publishing Company,1982.
  • J.O. Nilsson, Mater Sci Tech Ser, 8 (1992) 685-700.
  • J.M. Cabrera, A. Mateo, L. Llanes, J.M. Prado, M. Anglada, J MaterProcess Tech, 143 (2003) 321-325.
  • J.L. Song, P.S. Bate, Acta Mater, 45 (1997) 2747-2757.
  • J.L. Song, P.L. Blackwell, Mater Sci Tech Ser, 15 (1999) 1285-1292.
  • J.J. Sanchez-Hanton, R.C. Thomson, Materials Science and EngineeringA, 460-461 (2007) 261-267.
  • J.J. Petrovic, A.K. Vasudevan, Mater Sci Eng, 34 (1978) 53-59.
  • J.J. Moverare, M. Oden, Metall Mater Trans A, 33 (2002) 57-71.
  • J.C. Glez, J. Driver, Journal of Applied Crystallography, 34 (2001) 280-288.
  • J.A. Jimenez, G. Frommeyer, M. Carsi, O.A. Ruano, Mat Sci Eng a-Struct, 307 (2001) 134-142.
  • J.A. Jimenez, F. Carreno, O.A. Ruano, M. Carsi, Mater Sci Tech Ser, 15(1999) 127-131.
  • J. Li, K.J. Van Vliet, T. Zhu, S. Yip, S. Suresh, Nature, 418 (2002) 307-310.
  • J. Kang, Y. Ososkov, J.D. Embury, D.S. Wilkinson, Scripta Materialia,56 (2007) 999-1002.
  • J. Kang, Y. Ososkov, J.D. Embury, D.S. Wilkinson, Scripta Mater, 56(2007) 999-1002.
  • J. Beddoes, J.G. Parr, Introduction to Stainless Steels, ASM International,1999.
  • I.A. Yakubtsov, A. Ariapour, D.D. Perovic, Acta Mater, 47 (1999) 1271-1279.
  • I. Karaman, H. Sehitoglu, H.J. Maier, Y.I. Chumlyakov, Acta Mater, 4944(2001) 3919-3933.
  • Humphrie.Cw, N. Ridley, Journal of Materials Science, 9 (1974) 1429-1435.
  • H.W. Hayden, R.C. Gibson, J.H. Brophy, Sci Am, 220 (1969) 28-&.
  • H.W. Hayden, P.D. Goodell, S. Floreen, Metall Trans, 3 (1972) 833-&.
  • H.M. Ledbetter, M.W. Austin, Mater Sci Eng, 70 (1985) 143-149.
  • H.J. Chang, H.N. Han, M.C. Fivel, in: Key Engineering Materials,2007, pp. 925-930.
  • H. Unckel, J. Inst. Met., 61 (1937).
  • H. Na, S. Nambu, M. Ojima, J. Inoue, T. Koseki, Scripta Materialia, 69(2013) 793-796.
  • H. Miyamoto, T. Mimaki, S. Hashimoto, Mat Sci Eng a-Struct, 319(2001) 779-783.
  • H. Ghadbeigi, C. Pinna, S. Celotto, J.R. Yates, Materials Science and51Engineering A, 527 (2010) 5026-5032.
  • H. Bei, Y.F. Gao, S. Shim, E.P. George, G.M. Pharr, Phys Rev B, 77(2008).
  • H. Bei, E.P. George, J.L. Hay, G.M. Pharr, Phys Rev Lett, 95 (2005).
  • G.M. Pharr, W.C. Oliver, F.R. Brotzen, J Mater Res, 7 (1992) 613-617.
  • G.M. Pharr, Mat Sci Eng a-Struct, 253 (1998) 151-159.
  • G.K. Williamson, R.E. Smallman, Philos Mag, 1 (1956) 34-46.
  • G.I. Raab, Materials Science and Engineering A, 410-411 (2005) 230-233.
  • G.E. Bacon, Neutron diffraction, 3d ed., Clarendon Press, Oxford Eng.,1975.
  • G. Martin, D. Caldemaison, M. Bornert, C. Pinna, Y. Brechet, M. Veron,J.D. Mithieux, T. Pardoen, Experimental Mechanics, 53 (2013) 205-215.
  • G. Martin, D. Caldemaison, M. Bornert, C. Pinna, Y. Brechet, M. Veron,153J.D. Mithieux, T. Pardoen, Experimental Mechanics, 53 (2013) 205-215.
  • G. E. Dieter, “Mechanical Metallurgy” McGraw-Hill (1986)
  • F.J. Humphreys, Journal of Materials Science, 36 (2001) 3833-3854.
  • F.J. Humphreys, J. Mater. Sci., 36 (2001) 2833-3854.
  • F.E. Al Jouni, Hot deformation of two phase stainless steels, (1983).
  • F. Montheillet, M. Cohen, J.J. Jonas, Acta Metallurgica, 32 (1984) 2077-2089.
  • F. Dupoiron, J.P. Audouard, Scand J Metall, 25 (1996) 95-102.
  • E.M. Lehockey, Y. Lin, O.E. Lepik, Electron Backscatter Diffraction inMaterials Science, (2000) 247-264.
  • E. Soppa, P. Doumalin, P. Binkele, T. Wiesendanger, M. Bornert, S. Schmauder, Computational Materials Science, 21 (2001) 261-275.
  • E. Heripre, M. Dexet, J. Crepin, L. Gelebart, A. Roos, M. Bornert, D. Caldemaison, International Journal of Plasticity, 23 (2007) 1512-1539.
  • D.P. Field, K.R. Magid, I.N. Mastorakos, J.N. Florando, D.H. Lassila,J.W. Morris, Philos Mag, 90 (2010) 1451-1464.
  • D.N. LEE, TEXTURE AND RELATED PHENOMENA, The KoreanInstitute of Metals and Materials, 2006.
  • D.N. Githinji, S.M. Northover, P.J. Bouchard, M.A. Rist, Metall MaterTrans A, 44A (2013) 4150-4167.
  • D.J. Child, G.D. West, R.C. Thomson, Acta Mater, 59 (2011) 4825-4834.
  • D.G. Carr, M.I. Ripley, D.W. Brown, S.C. Vogel, T.M. Holden, Journalof Nuclear Materials, 359 (2006) 202-207.
  • D. PulinoSagradi, A.M.M. Nazar, J.J. Ammann, R.E. Medrano, ActaMater, 45 (1997) 4663-4666.
  • D. Peckner, I.M. Bernstein, Handbook of Stainless Steels, McGraw-Hill,1977.
  • D. Kempf, V. Vignal, G. Cailletaud, R. Oltra, J.C. Weeber, E. Finot,Philos Mag, 87 (2007) 1379-1399.
  • D. Jorge-Badiola, A. Iza-Mendia, I. Gutierrez, Mat Sci Eng a-Struct, 39445(2005) 445-454.
  • D. Dye, H.J. Stone, R.C. Reed, Acta Mater, 49 (2001) 1271-1283.
  • D. Balzar, J Res Natl Inst Stan, 98 (1993) 321-353.
  • C.A. Schuh, J.K. Mason, A.C. Lund, Nat Mater, 4 (2005) 617-621.
  • C.A. H, Dislocations and Plastic Flow in Crystals, Clarendon Press, 1953.
  • C. Pinna, J.H. Beynon, C.M. Sellars, M. Bornert, Proceedings of the Int. Conf. on Mathematical Modelling in Metal Processing and Manufacturing-COM 2000, (2000).
  • C. Liu, J. Yuen, A. Torralba, IEEE Transactions on Pattern Analysis andMachine Intelligence, 33 (2011) 978-994.
  • C. Fukuoka, K. Morishima, H. Yoshizawa, K. Mino, Scripta Mater, 46(2002) 61-66.
  • C. Begau, A. Hartmaier, E.P. George, G.M. Pharr, Acta Mater, 59 (2011)934-942.
  • C. Badulescu, M. Grediac, J.D. Mathias, Measurement Science andTechnology, 20 (2009).
  • B. Pan, P. Cheng, B. Xu, in: Proceedings of SPIE - The InternationalSociety for Optical Engineering, 2005, pp. 544-551.
  • B. Pan, K. Li, W. Tong, Experimental Mechanics, 53 (2013) 1277-1289.
  • B. Pan, Experimental Mechanics, 51 (2011) 1223-1235.
  • B. Pan, A. Asundi, H. Xie, J. Gao, Optics and Lasers in Engineering, 47(2009) 865-874.
  • B. Clausen, T. Lorentzen, T. Leffers, Acta Mater, 46 (1998) 3087-3098.
  • B. Clausen, T. Lorentzen, M.A.M. Bourke, M.R. Daymond, Mat Sci Enga-Struct, 259 (1999) 17-24.
  • B. Ahn, H.I. Koo, N.I. Cho, in: 2014 Asia-Pacific Signal andInformation Processing Association Annual Summit and Conference, APSIPA2014, 2014.
  • A.W. Hull, Phys Rev, 10 (1917) 661-696.
  • A.J. Wilkinson, P.B. Hirsch, Micron, 28 (1997) 279-308.
  • A.J. Wilkinson, D.J. Dingley, Acta Metallurgica Et Materialia, 39 (1991)3047-3055.
  • A.J. Schwartz, M. Kumar, B.L. Adams, Electron Backscatter Diffractionin Materials Science, (2000).
  • A. Soula, D. Locq, D. Boivin, Y. Renollet, P. Caron, Y. Brechet,Journal of Materials Science, 45 (2010) 5649-5659.
  • A. Saez-Maderuelo, L. Castro, G. De Diego, Journal of NuclearMaterials, 416 (2011) 75-79.
  • A. Mateo, L. Llanes, M. Anglada, A. Redjaimia, G. Metauer, Journal ofMaterials Science, 32 (1997) 4533-4540.
  • A. Gouldstone, H.J. Koh, K.Y. Zeng, A.E. Giannakopoulos, S. Suresh,Acta Mater, 48 (2000) 2277-2295.
  • A. Girones, P. Villechaise, A. Mateo, M. Anglada, J. Mendez, MaterialsScience and Engineering A, 387-389 (2004) 516-521.
  • A. Girones, P. Villechaise, A. Mateo, M. Anglada, J. Mendez, Mat SciEng a-Struct, 387 (2004) 516-521.
  • A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, Scripta Mater, 42 (2000)319-325.
  • A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, Phil Mag Lett, 80 (2000)711-718.
  • A. Belyakov, T. Sakai, H. Miura, Mater T Jim, 41 (2000) 476-484.
  • A. Belyakov, H. Miura, T. Sakai, Mat Sci Eng a-Struct, 255 (1998) 139-147.
  • A. Baczmanski, C. Braham, Acta Mater, 52 (2004) 1133-1142.
  • A. Arsenlis, D.M. Parks, Acta Mater, 47 (1999) 1597-1611.