연구동향 분석
박사

BLDC 전동기의 권선 단락과 영구자석의 불가역 감자 고장의 동적 특성 분석을 위한 모델링

김경태 2015년

논문상세정보
인용/피인용
' BLDC 전동기의 권선 단락과 영구자석의 불가역 감자 고장의 동적 특성 분석을 위한 모델링' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • bldc 전동기
  • demagnetization
  • dynamic analysis
  • fault detection
  • fault diagnosis
  • turn fault
  • 고장 진단
  • 고장검출
  • 권선 절연 파괴
  • 불가역 감자
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
302 0

0.0%

' BLDC 전동기의 권선 단락과 영구자석의 불가역 감자 고장의 동적 특성 분석을 위한 모델링' 의 참고문헌

  • 차세대 자동차의 2020 비전과 전략
    조철 산업연구원, 2007 [2020]
  • 전자정보센터, “국내/외 최근 가전동향”
    전자부품연구원 [2005]
  • 글로벌 전기자동차, “하이브리드차 개발동향과 시장전망”
    데이코 산업연구소, 2010 [2010]
  • “하이브리드 자동차의 모든 것(2)”
    A&D 컨설턴트 [2010]
  • “전원 신호분석 기술에 의한 회전기기 진단”
    정재천 인터비젼 [2008]
  • “전동기의 보수점검 및 고장진단”
    이종춘 성안당 [2010]
  • “자동차용 모터(Electric motors) 기장과 기술동향”
    A&D 컨설턴트 [2008]
  • “모터의 새 시대 활짝, 전동차량이 진화의 견인차”
    Nikkei Eletronics Koreaedition, Nov [2010]
  • “가전제품의 동향과 금속재료의 전개”
    이홍원 고경력과학기술인 (RESEAT) [2005]
  • “가전에서 시작된 모터 혁명, 세탁기에서 전동차량으로 확대”
    Nikkei EletronicsKorea edition, May [2010]
  • “Recent advances in modeling and onlinedetection of stator interturn faults in electrical motors,”
    Corrigan, T. Gandhi, A. Parsa, L. IEEE Trans.Ind. Elc., Vol. 58, No. 5, pp 1564-1575, May 참고문헌 [2011]
  • “Online condition monitoring ofinduction motors,”
    Kohler, J. L. Sottile, J. Trutt, F. C. IEEE Trans. Ind. Appl., Vol. 38, No. 6, pp.1627-1632, Nov./Dec. 참고문헌 [2002]
  • “A novel cogging torquereduction method for interior-type permanent-magnet motor,”
    G. H. Kang G. T. Kim J. Hur Y. D. Son IEEETrans. Ind. Appl., Vol. 45, pp. 161?167, Jan./Feb. 참고문헌 [2009]
  • “A Stator turn fault detection method and a fault-tolerantoperating strategy for interior PM synchronous motor drives in참고문헌safety-critical applications”
    Y. K. Lee Ph.D. dissertation Georgia Inst. Technology,Atlanta, Aug [2007]
  • Z. Q. Zhu and D. Howe, “Electrical Machines and Drives for Electric,Hybrid and Fuel Cell Vehicles,” Proceedings of the IEEE, Vol. 95, No.4, pp. 746-765, Apr. 2007.
  • Y. S. Lee, K. T. Kim and J. Hur "Finite-Element Analysis of theDemagnetization of IPM-type BLDC Motor with Stator Turn Fault", IEEETrans Magn., Vol. 50, No. 2, Feb. 2014.
  • Y. S. Jeong, S. K. Sul, S. E. Schulz, and N. R. Patel, “Fault detectionand fault-tolerant control of interior permanent-magnet motor drivesystem for electric vehicle,” IEEE Trans. Ind. App., Vol.41, No.1, pp46-51, Jan./Feb. 2005.
  • Y. K. Lee and T. G. Habetler, “Modeling and analysis of stator turnfaults in interior PM synchronous motor drives,” submitted for reviewin IEEE Trans. Energy Conversion.
  • Y. Da, X. Shi, and M. Krishnamurthy, “A new approach to faultdiagnostics for permanent magnet synchronous machines usingelectromagnetic signature analysis,” IEEE Trans. Power Elec., Vol. 28,No. 8, pp. 4104-4112, Aug. 2013.
  • X. Xi, C. Changming, and Z. Meng, “Magnet demagnetizationobservation for permanent magnet synchronous motor,” presented at2011 Int. Conf. Elect. Mach. Syst. (ICEMS), Wuhan, 2011.
  • W. le. Roux, R. G. Harley, and T. G. Habetler, “Converter controleffects on condition monitoring of rotor faults in permanent magnetsynchronous machines,” IEEE Trans. Ind. App., Vol. 36, No. 5,pp.1318-1329, Sep./Oct. 2000.
  • W. N. Fu and S. L. Ho, “Dynamic demagnetization computation ofpermanent magnet motors using finite element method with normalmagnetization curves,” IEEE Trans. Appl. Supercond., Vol. 20, pp.851?855, June 2010.
  • W. Lu, M. Liu, Y. Luo, and Y. Liu, “Influencing factors on thedemagnetization of line-start permanent magnet synchronous motorduring its starting algorithm,” presented at 2011 Int. Conf. Elect. Mach.Syst. (ICEMS), Beijing, 2011.
  • T. H. Kim, H. W. Lee, and S. S. Kwak, “The internal fault analysis ofbrushless DC motors based on the winding function theory,” IEEETrans. Magn., Vol. 45, pp. 2090?2091, May. 2009.
  • S. Nandi, H. A. Toliyat, and X. Li, “Condition monitoring and faultdiagnosis of electrical motors?A review,” IEEE Trans. Ener. Conv., Vol.20, No. 4, Dec. 2005.
  • S. B. Lee, R. M. Tallam, and T. G. Habetler, “A robust, on-line turnfault detection technique for induction machines based on monitoringthe sequence component impedance matrix,” IEEE Trans. Power Elec.,Vol. 18, No. 3, pp. 865-872, May 2003.
  • S. B. Lee and T. G. Habetler, “An online stator winding resistanceestimation technique for temperature monitoring of line-connectedinduction machines,” IEEE Trans. Ind. App., Vol. 39, No. 3, pp.685-694, May./Jun. 2003.
  • P. Ostojic, A. Banerjee, D.C. Patel and et al., “Advanced MotorMonitoring and Diagnostics” IEEE Trans. Ind. App., Vol. 50, No. 5, pp.3120-2127, Sep./Oct. 2014.
  • P. Neti and S. Nandi, “Stator interturn fault detection of synchronousmachines using field current and rotor search-coil voltage signatureanalysis,” IEEE Trans. Ind. Appl., Vol. 45, No. 3, pp, 911-920, Jun.2009.
  • P. J. Tavner, “Cross-magnetisation effects in electrical machines,” IEEEProc. Electr. Power Appl., Vol. 151, No. 3, pp. 249-259, May. 2004.
  • M. Y. Kia, M. Khedri, H. R. Najafi and et al., “Hybrid modelling ofdoubly fed induction generators with inter-turn stator fault and itsdetection method using wavelet analysis” IEEE Trans. Generation,Tran.&Dist., IET, Vol. 7, No. 9, pp. 982-990, Sep. 2013.
  • M. Takemoto, A. Chiba, and T. Fukao, “A method of determining theadvanced angle of square-wave currents in a bearingless switchedreluctance motor,” IEEE Trans. Ind, Appl., Vol. 37, pp. 1702?1709,Nov./Dec. 2001.
  • M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, “Failuremechanism of the interturn insulation of low voltage electric machinesfed by pulse-controlled inverters,” IEEE Elec. Insul. Mag., Vol. 12, No.5, pp. 9-16, Sept./Oct. 1996.
  • M. Eftekhari, M. Moallem, S. Sadri and et al., “Online Detection ofInduction Motor's Stator Winding Short-Circuit Faults” IEEE Trans.Sys. Jour., Vol. 8, No. 4, pp. 1272-1282, Dec. 2014.
  • M. A. Cruz and J. M. Cardoso, “Diagnosis of stator inter-turn shortcircuits in DTC induction motor drives,” IEEE Trans Ind. Appl., Vol.40, No. 5, Sep./Oct. 2004.
  • K. Yamazaki and Y. Seto, “Iron loss analysis of interior permanentmagnet synchronous motors-variation of main loss factors due todriving condition,” IEEE Trans. Ind. App., Vol. 42, No. 4, pp.1045-1052, Jul./Aug. 2006.
  • K. T. Kim, S. T. Lee and J. Hur "Diagnosis Technique Using a DetectionCoil in BLDC Motors with Inter-Turn Faults", IEEE Trans Magn., Vol.50, No. 2, Feb. 2014.
  • K. H. Kim, B. G. Gu and I. S. Jung, “Online fault-detecting scheme ofan inverter-fed permanent magnet synchronous motor under statorwinding shorted turn and inverter switch open” IEEE Trans. ElectricPower App., IET, Vol. 5, No. 6, pp. 529-539, Jul. 2011.
  • J. R. Ruiz, J. A. Rosero, A. G. Espinosa, and L. Romeral, “Detection ofdemagnetization faults in permanent-magnet synchronous motorsunder non-stationary conditions,” IEEE Trans. Magn., Vol. 45, pp.2961?2969, Jul. 2009.
  • J. M. Miller and J. R. Hendershot, “Design of BlushlessPermanent-Magnet Motors,” Oxford Science, 1994.
  • J. Hur, “Characteristic analysis of interior permanent magnetsynchronous motor in electro-hydraulic power steering system,” IEEETrans. Ind. Elec., Vol. 55, No. 6, pp. 2316-2322, Jun. 2008.
  • J. Hur, J. W. Reu, B. W. Kim, and G. H. Kang, “Vibration reduction ofIPM-type BLDC motor using negative third harmonic eliminationmethod of air-gap flux density,” IEEE Trans. Ind. Appl., Vol. 47, pp.1300?1309, May. 2011.
  • J. Hur "Comparison of the FaultCharacteristics of IPM-type and SPM-type BLDC Motors underInter-Turn Fault Conditions Using Winding Function Theory", IEEETrans on Ind. App., Vol. 50, No. 2, pp. 986-994, Mar./Apr
    J. K. Park K. T. Kim 참고문헌 [2014]
  • J. A. Padilla, M. Sumner and C. Gerada, “Winding condition monitoringschemefor a permanent magnet machine using high-frequencyinjection” IEEE Trans. Electric Power App., IET, Vol. 5, No. 1, pp.89-99, Jan. 2011.
  • H. W. Penrose, “Electric Motor Diagnostics,” Success by Design.
  • H. Henao, C. Demian and G. A. Capolino, “A frequency-domaindetection of stator winding faults in induction machines using anexternal flux sensor” IEEE Trans. Ind. Appl., Vol. 39, No. 5, pp.1272-1279, Sep./Oct. 2003.
  • G. Pellegrino, P. Guglielmi, A. Vagati, and F. Villata, “Core losses andtorque ripple in IPM machines: dedicated modeling and designtradeoff,” IEEE Trans. Ind. Appl., Vol. 46, pp. 2381?2391, Nov. 2010.
  • G. J. Li, S. Hloui, J. Ojeda and et al., “Excitation Winding Short-Circuitsin Hybrid Excitation Permanent Magnet Motor” IEEE Trans. EnergyConv., Vol. 29, No. 3, pp. 567-575, Sep. 2014.
  • G. H. Kang, J. Hur, H. Nam, J. P. Hong, and G. T. Kim, “Analysis ofirreversible magnet demagnetization in line-start motors based on thefinite-element method,” IEEE Trans. Magn., Vol. 39, pp. 1488?1491,May 2003.
  • G. B. Kliman, W. J. Premerland, R. A. Koegl, and D. Hoeweler, “A newapproach to on-line turn fault detection in AC motors,” in Conf. Rec.IEEE IAS, San Diego, CA, Vol. 1, pp. 687-693, Oct. 1996.
  • F. Meinguet, E. Semail, X. Kestelyn and et al., “Change-detectionalgorithm for short-circuit fault detection in closed-loop AC drives,”IEEE Trans. Electric Power Appl., IET, Vol. 8, No. 5, pp. 165-177, May2014.
  • F. Briz, M. Degner, A. Zamarron, and J. Guerrero, “Online statorwinding fault diagnosis in inverter-fed AC machines usinghigh-frequency signal injection,” IEEE Trans. Ind. Appl., Vol. 39, No. 4,pp. 1109-1117, Jul./Aug. 2003.
  • E. Wiedenbrug, “Measurement Analysis and Efficiency Estimation ofThree Phase Induction Machine using Instantaneous ElectricalQuantities,” a Dissertation submitted to Oregon State University, Sep.1998.
  • D. Zarko, D. Ban, and T. A. Lipo, “Analytical calculation of magneticfield distribution in the slotted air gap of a surface permanent-magnetmotor using complex relative air-gap permeance,” IEEE Trans. Magn.,Vol. 42, pp. 1828?1837, Jul.. 2006.
  • D. Shah, S. Nandi, and P. Neti, “Stator-interturn-fault detection ofdoubly fed induction generators using rotor-current andsearch-coil-voltage signature analysis,” IEEE Trans. Ind. Appl., Vol. 45,No. 5, pp. 1831-1842, Oct. 2009.
  • B. M. Ebrahimi and J. Faiz, “Feature extraction for short-circuit faultdetection in permanent-magnet synchronous motors usingstator-current monitoring,” IEEE Trans. Power Elec., Vol. 25, No. 10,Oct. 2010.
  • B. Lu, T. G. Habetler, and R. G. Harley, “A Survey ofEfficiency-Estimation Method for In-Service Induction Motors,” IEEETrans. Ind. Appl., Vol. 42, No. 4, Jul./Aug. 2006.
  • A. Bonnett and Yung, C., “Increased efficiency versus increasedreliability” IEEE Trans. Ind. Appl. Mag., Vol. 14, No. 1, pp. 29-36,Jan./Feb. 2008.