연구동향 분석
박사

다축 구동기구의 위치결정오차 평가 = A study on positioning error evaluation of a multi-axes driving device

이민호 2015년

논문상세정보
    • 저자 이민호
    • 형태사항 26 cm: 삽도: xi, 137 p.
    • 일반주기 권두 국문요지, 권말 Abstract 수록, 지도교수: 조남규, 부록 수록, 참고문헌: p. 111-122
    • 학위논문사항 한양대학교 대학원, 기계설계·메카트로닉스공학과, 2015. 8, 학위논문(박사)-
    • 발행지 서울
    • 언어 kor
    • 출판년 2015
    • 발행사항 한양대학교 대학원
    • 주제어 기계공학
    유사주제 논문( 32)
인용/피인용
' 다축 구동기구의 위치결정오차 평가 = A study on positioning error evaluation of a multi-axes driving device' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 기계공학
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
32 0

0.0%

' 다축 구동기구의 위치결정오차 평가 = A study on positioning error evaluation of a multi-axes driving device' 의 참고문헌

  • keyence co.,. http://www.keyence.com/
  • Z. Zhang, Q. Feng, Z. Gao, C. Kuang, C. Fei, Z. Li, et al., "A new laser displacement sensorbased on triangulation for gauge real-time measurement," Optics and Laser Technology, 40, 252-255, 2008.
  • Z. Y. Gao, J. C. Hu, Y. Zhu, and G. H. Duan, "A new 6-degree-of-freedom measurement methodof X-Y stages based on additional information," Precision Engineering-Journal of the InternationalSocieties for Precision Engineering and Nanotechnology, 37, 606-620, 2013.
  • Y. S. Zhai, Q. B. Feng, and B. Zhang, "A simple roll measurement method based on arectangular-prism," Optics and Laser Technology, 44, 839-843, 2012.
  • Y. Qin, "Micro-forming and miniature manufacturing systems - development needs andperspectives," Journal of Materials Processing Technology, 177, 8-18, 2006.
  • X. Mao, B. Li, H. Shi, H. Liu, X. Li, and P. Li, "Error measurement and assemble errorcorrection of a 3D-step-gauge," Frontiers of Mechanical Engineering in China, 2, 388-393, 2007.
  • Werth inc., http://www.werthinc.com/us/
  • W. Wang, S. H. Kweon, C. S. Hwang, N. C. Kang, Y. S. Kim, and S. H. Yang, "Developmentof an optical measuring system for integrated geometric errors of a three-axis miniaturized machinetool," International Journal of Advanced Manufacturing Technology, 43, 701-709, 2009.
  • W. T. Estler, S. D. Phillips, B. Borchardt, T. Hopp, C. Witzgall, M. Levenson, et al., "Errorcompensation for CMM touch trigger probes," Precision Engineering-Journal of the AmericanSociety for Precision Engineering, 19, 85-97, 1996.
  • W. S. Park and H. S. Cho, "Measurement of fine 6-degrees-of-freedom displacement of rigidbodies through splitting a laser beam: experimental investigation," Optical Engineering, 41, 860-871, 2002.
  • W. S. Park and H. Cho, "Neural network computing for interpretation of novel sensor signalsfor six-degree-of-freedom motions of objects," Measurement Science & Technology, 15, 328-336,2004.
  • W. P. van Vliet and P. H. J. Schellekens, "Development of a fast mechanical probe for coordinatemeasuring machines," Precision Engineering-Journal of the American Society for PrecisionEngineering, 22, 141-152, 1998.
  • W. K. Park, D. M. Lee and W. H. Hong, "A Study on Basic Research Trends of Ultra-PrecisionMachining Technology in Korea," Korean Society of Manufacturing Technology Engineers, 20, 86-95, 2011.
  • W. Jywe, T. H. Hsu, and C. H. Liu, "Non-bar, an optical calibration system for five-axis CNCmachine tools," International Journal of Machine Tools & Manufacture, 59, 16-23, 2012.
  • W. J. Shin and N. G. Cho, "A Study on the Error Compensation of Three-DOF TranslationalParallel Manipulator," Journal of the Korean Society of Manufacturing Technology Engineers, 13,44-52, 2004.
  • T. T. Liao and P. D. Lin, "Analysis of optical elements with flat boundary surfaces," AppliedOptics, 42, 1191-1202, 2003.
  • T. S. Pan, J. Y. Lee, S. W. Wu, H. L. Hsieh and C. C. Hsu, "Double corner cube method forenhancing the sensitivity of straightness measurement," in SICE Annual Conference (SICE), 2012Proceedings of, 2012, pp. 1010-1013.120
  • T. Oiwa and T. Tanaka, "Miniaturized three-dimensional touch trigger probe using optical fibrebundle," Measurement Science & Technology, 16, 1574-1581, 2005.118
  • T. Oiwa and H. Nishitani, "Three-dimensional touch probe using three fibre optic displacementsensors," Measurement Science & Technology, 15, 84-90, 2004.
  • T. Morris, "A new slant on diagonal laser testing," Laser Metrology and Machine PerformanceV, 29-40, 2001.113
  • T. Liebrich, B. Bringmann, and W. Knapp, "Calibration of a 3D-ball plate," PrecisionEngineering-Journal of the International Societies for Precision Engineering and Nanotechnology,33, 1-6, 2009.115
  • T. Liebrich and W. Knapp, "Improvements and experimental validation of a 3D-probing systemfor micro-components," Cirp Annals-Manufacturing Technology, 61, 475-478, 2012.
  • T. H. Hsieh, W. Y. Jywe, S. L. Chen, C. H. Liu, and H. L. Huang, "Note: Development of a highresolution six-degrees-of-freedom optical vibrometer for precision stage," Review of ScientificInstruments, 82, 2011.
  • T. Erkan, R. Mayer, and A. Wozniak, "Surface probing simulator for the evaluation of CMMprobe radius correction software," International Journal of Advanced Manufacturing Technology,55, 307-315, 2011.
  • S.-R. Park, T.-K. Hoang, and S.-H. Yang, "A new optical measurement system for determiningthe geometrical errors of rotary axis of a 5-axis miniaturized machine tool," Journal of MechanicalScience and Technology, 24, 175-179, 2010.
  • S.-R. Liang and A. C. Lin, "Probe-radius compensation for 3D data points in reverseengineering," Computers in Industry, 48, 241-251, 2002.
  • S. W. Lee, R. Mayor, and J. Ni, "Development of a six-degree-of-freedom geometric errormeasurement system for a meso-scale machine tool," Journal of Manufacturing Science andEngineering-Transactions of the Asme, 127, 857-865, 2005.121
  • S. Ibaraki, T. Hata, and A. Matsubara, "A new formulation of laser step-diagonal measurementtwo-dimensional case," Precision Engineering-Journal of the International Societies for PrecisionEngineering and Nanotechnology, 33, 56-64, 2009.
  • S. Ibaraki and T. Hata, "A new formulation of laser step diagonal measurement-Threedimensionalcase," Precision Engineering-Journal of the International Societies for PrecisionEngineering and Nanotechnology, 34, 516-525, 2010.
  • S. H. Yang, K. H. Kim, and Y. K. Park, "Measurement of spindle thermal errors in machine toolusing hemispherical ball bar test," International Journal of Machine Tools & Manufacture, 44, 333-340, 2004.
  • S. Chatterjee, "An assessment of quasi-static and operational errors in NC machine tools,"Journal of Manufacturing Systems, 16, 59-68, 1997.
  • Renishaw, http://www.renishaw.com117
  • R. T. Lee and F. J. Shiou, "Calculation of the unit normal vector using the cross-curve movingmask method for probe radius compensation of a freeform surface measurement," Measurement, 43,469-478, 2010.
  • R. Ramesh, M. A. Mannan, and A. N. Poo, "Error compensation in machine tools - a review PartI: geometric, cutting-force induced and fixture-dependent errors," International Journal of MachineTools & Manufacture, 40, 1235-1256, 2000.
  • Q. Liang, D. Zhang, Y. Wang, and Y. Ge, "Development of a touch probe based on fivedimensionalforce/torque transducer for coordinate measuring machine (CMM)," Robot. Comput.-Integr. Manuf., 28, 238-244, 2012.
  • Q. B. Feng, B. Zhang, and C. F. Kuang, "Four degree-of-freedom geometric errormeasurement system with common-path compensation for laser beam drift," International Journalof Precision Engineering and Manufacturing, 9, 26-31, 2008.
  • Q. B. Feng, B. Zhang, and C. F. Kuang, "A straightness measurement system using a singlemodefiber-coupled laser module," Optics and Laser Technology, 36, 279-283, 2004.
  • Q. B. Feng, B. Zhang, C. X. Cui, C. F. Kuang, Y. S. Zhai, and F. L. You, "Development of asimple system for simultaneously measuring 6DOF geometric motion errors of a linear guide,"Optics Express, 21, 25805-25819, 2013.
  • P. Huang, Y. Li, H. Wei, L. Ren, and S. Zhao, "Five-degrees-of-freedom measurement systembased on a monolithic prism and phase-sensitive detection technique," Appl Opt, 52, 6607-6615,2013.122
  • P. D. Lin, W. Jywe, and C. J. Chen, "General method for determining the sensor readings ofmotion measurement systems by using skew-ray tracing method," Optik, 120, 257-264, 2009.
  • P. D. Lin and C. K. Sung, "Matrix-based paraxial skew ray-tracing in 3D systems with noncoplanaroptical axis," Optik, 117, 329-340, 2006.
  • P. D. Lin and C. H. Lu, "Analysis and design of optical systems by use of sensitivity analysisof skew ray tracing," Applied Optics, 43, 796-807, 2004.
  • P. A. Cauchick-Miguel and T. G. King, "Factors which influence CMM touch trigger probeperformance," International Journal of Machine Tools & Manufacture, 38, 363-374, 1998.
  • N. Ferreira, T. Krah, K. Kniel, S. Buttgenbach, and F. Hartig, "Universal characterizationmethod for 3D tactile probing systems," 2013, pp. 875945-875945-875910.
  • M. Xiushui, Q. Xiaochao, L. Guihua, and Z. Weihong, "Modeling and simulation of CMMsprobe trigger pre-travel error," in Intelligent Systems and Knowledge Engineering (ISKE), 2010International Conference on, 2010, pp. 528-532.
  • M. Lee, J. J. Park, and N. G. Cho, "Positioning error correction using virtual coordinate systemfor mMTs," Journal of Mechanical Science and Technology, 27, 3861-3868, 2013.
  • M. Lee and N. G. Cho, "Probing-error compensation using 5 degree of freedom force/momentsensor for coordinate measuring machine," Measurement Science & Technology, 24, 2013.
  • M. G. Kim, D. H. Lee, and N. G. Cho, "A force sensor with five degrees of freedom usingoptical intensity modulation for usage in a magnetic resonance field," Measurement Science &Technology, 24, 2013.119
  • M. Dobosz and A. Wo?niak, "Metrological feasibilities of CMM touch trigger probes: Part II:Experimental verification of the 3D theoretical model of probe pretravel," Measurement, 34, 287-299, 2003.
  • M. Dobosz and A. Wo?niak, "CMM touch trigger probes testing using a reference axis,"Precision Engineering, 29, 281-289, 2005.
  • M. A. V. Chapman, "Limitations of laser diagonal measurements," Precision Engineering, 27,401-406, 2003.
  • L. Dong Hyeok, K. Min Gyu, and C. Nahm Gyoo, "Development of Multi-Degree of FreedomCarbon Fiber Plate Force/Torque Sensor," Journal of the Korean Society for Precision Engineering,29, 170-177, 2012.
  • K. Kwon, J. J. Park, and N. Cho, "A highly sensitive multi-dimensional motion measurementsystem using a spherical reflector," Measurement Science & Technology, 17, 2421-2429, 2006.
  • K. Kim, Y. Sun, R. M. Voyles, and B. J. Nelson, "Calibration of multi-axis MEMS force sensorsusing the shape-from-motion method," Ieee Sensors Journal, 7, 344-351, 2007.
  • K. I. Lee, J. C. Lee, and S. H. Yang, "The optimal design of a measurement system to measurethe geometric errors of linear axes," International Journal of Advanced Manufacturing Technology,66, 141-149, 2013.
  • K. H. Kwon, J. J. Park, I. G. Lee, N. G. Cho and H. I. Yang, "Precision Evaluation Method forthe Positioning Error of Three-DOF Parallel Mechanism using Coordinate Measuring Machine(CMM)," Journal of the Korean Society for Precision Engineering, 21, 99-109, 2004.
  • K. G. Ahn and D. W. Cho, "An analysis of the volumetric error uncertainty of a three-axismachine tool by beta distribution," International Journal of Machine Tools & Manufacture, 40, 2235-2248, 2000.
  • K. C. Fan, M. J. Chen, and W. M. Huang, "A six-degree-of-freedom measurement system forthe motion accuracy of linear stages," International Journal of Machine Tools & Manufacture, 38,155-164, 1998.
  • K. C. Fan and Y. Zhao, "A laser straightness measurement system using optical fiber andmodulation techniques," International Journal of Machine Tools & Manufacture, 40, 2073-2081,2000.
  • K. C. Fan and M. J. Chen, "A 6-degree-of-freedom measurement system for the accuracy of XYstages," Precision Engineering-Journal of the American Society for Precision Engineering, 24,15-23, 2000.
  • J.J. Park, K. Kwon, and N. Cho, "Development of a coordinate measuring machine (CMM)touch probe using a multi-axis force sensor," Measurement Science and Technology, 17, 2380, 2006.
  • J. M. Lai, J. S. Liao, and W. H. Chieng, "Modeling and analysis of nonlinear guideway fordouble-ball bar (DBB) measurement and diagnosis," International Journal of Machine Tools &Manufacture, 37, 687-707, 1997.
  • J. Janeczko, B. Griffin, and C. Wang, "Laser vector measurement technique for thedetermination and compensation of volumetric position errors. Part II: Experimental verification,"Review of Scientific Instruments, 71, 3938-3941, 2000.
  • J. J. Park, H. Eom, N. G. Cho, "An Uncertainty Analysis of a Compensation Method for thePositioning Error of Three-DOF Manipulator," Journal of the Korean Society for PrecisionEngineering, 23, 51-58, 2006.116
  • J. Hwang, C. H. Park, W. Gao, and S. W. Kim, "A three-probe system for measuring theparallelism and straightness of a pair of rails for ultra-precision guideways," International Journalof Machine Tools & Manufacture, 47, 1053-1058, 2007.
  • J. H. Lee, Y. Liu, and S. H. Yang, "Accuracy improvement of miniaturized machine tool:Geometric error modeling and compensation," International Journal of Machine Tools &Manufacture, 46, 1508-1516, 2006.
  • J. H. Lee, S. R. Park, S. H. Yang, and Y. S. Kim, "Fabrication of a V-groove on the optical fiberconnector using a miniaturized machine tool," Journal of Materials Processing Technology, 155?156, 1716-1722, 2004.112
  • J. H. Lee and S. H. Yang, "Measurement of geometric errors in a miniaturized machine toolusing capacitance sensors," Journal of Materials Processing Technology, 164, 1402-1409, 2005.
  • J. F. Cuttino, D. E. Schinstock, and M. J. Prather, "Three-dimensional metrology frame forprecision applications," Precision Engineering-Journal of the American Society for PrecisionEngineering, 23, 103-112, 1999.
  • J. A. Soons, "Analysis of the Step-Diagonal Test," presented at the 7th International Conferenceand Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, LAMDAMAP2005, 2005.
  • ISO 230-6, Test code for machine tools ? Part 6: Determination of positioning accuracy onbody and face diagonals (Diagonal displacement tests), ISO, 2002.
  • ISO 230-4, Test code for machine tools ? Part 4: Circular tests for numerically controlledmachine tools, ISO, 2005.114
  • ISO 230-2, Test Code for Machine Tools-part 2: Determination of Accuracy and Repeatabilityof Positioning Numerically Controlled Axes, ISO, 2006.
  • ISO 230-1, Test Code for Machine Tools-part 1: Geometric Accuracy of Machines Operatingunder No-load or Finishing Conditions, ISO, 1996.
  • H. T. Zhang, J. G. Yang, Y. Zhang, J. H. Shen, and C. Wang, "Measurement and compensationfor volumetric positioning errors of CNC machine tools considering thermal effect," InternationalJournal of Advanced Manufacturing Technology, 55, 275-283, 2011.
  • H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine,"Geometric error measurement and compensation of machines-An update," Cirp Annals-Manufacturing Technology, 57, 660-675, 2008.
  • H. Schwenke, F. Waldele, C. Weiskirch, and H. Kunzmann, "Opto-tactile sensor for 2D and 3Dmeasurement of small structures on coordinate measuring machines," Cirp Annals-ManufacturingTechnology, 50, 361-364, 2001.
  • H. Murakami, N. Kawagoishi, E. Kondo, and A. Kodama, "Optical technique to measure fivedegree-of-freedom error motions for a high-speed microspindle," International Journal of PrecisionEngineering and Manufacturing, 11, 845-850, 2010.
  • H. J. Pahk, Y. S. Kim, and J. H. Moon, "A new technique for volumetric error assessment ofCNC machine tools incorporating ball bar measurement and 3D volumetric error model,"International Journal of Machine Tools & Manufacture, 37, 1583-1596, 1997.
  • H. Haitjema, W. O. Pril, and P. H. J. Schellekens, "Development of a silicon-based nanoprobesystem for 3-D measurements," Cirp Annals-Manufacturing Technology, 50, 365-368, 2001.
  • G. Zhang, R. Ouyang, B. Lu, R. Hocken, R. Veale, and A. Donmez, "A Displacement Methodfor Machine Geometry Calibration," CIRP Annals - Manufacturing Technology, 37, 515-518, 1988.
  • G. X. Zhang and Y. F. Zang, "A Method for Machine Geometry Calibration Using 1-D BallArray," CIRP Annals - Manufacturing Technology, 40, 519-522, 1991.
  • G. N. Peggs, A. J. Lewis, and S. Oldfield, "Design for a Compact High-Accuracy CMM," CIRPAnnals - Manufacturing Technology, 48, 417-420, 1999.
  • G. L. Dai, S. Butefisch, F. Pohlenz, and H. U. Danzebrink, "A high precision micro/nano CMMusing piezoresistive tactile probes," Measurement Science & Technology, 20, 2009.
  • G. H. J. Florussen, F. L. M. Delbressine, and P. H. J. Schellekens, "Assessing thermally inducederrors of machine tools by 3D length measurements," Cirp Annals-Manufacturing Technology, 52,333-336, 2003.
  • G. H. J. Florussen, F. L. M. Delbressine, M. J. G. van de Molengraft, and P. H. J. Schellekens,"Assessing geometrical errors of multi-axis machines by three-dimensional length measurements,"Measurement, 30, 241-255, 2001.
  • G. Chen, J. Yuan, and J. Ni, "A displacement measurement approach for machine geometricerror assessment," International Journal of Machine Tools and Manufacture, 41, 149-161, 2001.
  • F. Meli and A. Kung, "AFM investigation on surface damage caused by mechanical probingwith small ruby spheres," Measurement Science & Technology, 18, 496-502, 2007.
  • F. L. You, B. Zhang, and Q. B. Feng, "A novel laser straightness measurement method withbeam bend compensation," Optik, 122, 1530-1534, 2011.
  • E. Trapet, J.-J. Aguilar Martin, J.-A. Yague, H. Spaan, and V. Zeleny, "Self-centering probeswith parallel kinematics to verify machine-tools," Precision Engineering, 30, 165-179, 2006.
  • D. H. Lee, S. Y. Baek and N. G. Cho, "Six-degree-of-freedom Manipulator DisplacementMeasurement using Stereo Vision," Journal of the Korean Society for Precision Engineering, 32,191-198, 2015.
  • D. A. Axinte, S. A. Shukor, and A. T. Bozdana, "An analysis of the functional capability of anin-house developed miniature 4-axis machine tool," International Journal of Machine Tools &Manufacture, 50, 191-203, 2010.
  • Carl Zeiss Group, http://www.zeiss.com
  • C. Wang, "Laser vector measurement technique for the determination and compensation ofvolumetric positioning errors. Part I: Basic theory," Review of Scientific Instruments, 71, 3933-3937,2000.
  • C. Wang and G. Liotto, "A theoretical analysis of 4 body diagonal displacement measurementand sequential step diagonal measurement," in Proceedings of the LAMDAMAP 2003 Conference,Huddersfield, England, 2003.
  • C. R. Steinmetz, "Submicron Position Measurement and Control on Precision Machine-Toolswith Laser Interferometry," Precision Engineering-Journal of the American Society for PrecisionEngineering, 12, 12-24, 1990.
  • C. M. Oddo, P. Valdastri, L. Beccai, S. Roccella, M. C. Carrozza, and P. Dario, "Investigationon calibration methods for multi-axis, linear and redundant force sensors," Measurement Science &Technology, 18, 623-631, 2007.
  • C. H. Liu, W. Y. Jywe, C. C. Hsu, and T. H. Hsu, "Development of a laser-based high-precisionsix-degrees-of-freedom motion errors measuring system for linear stage," Review of ScientificInstruments, 76, 2005.
  • C. H. Liu, J. H. Chen, and Y. F. Teng, "Development of a straightness measurement andcompensation system with multiple right-angle reflectors and a lead zirconate titanate-basedcompensation stage," Review of Scientific Instruments, 80, 2009.
  • C. F. Kuang, Q. B. Feng, B. Zhang, B. Liu, S. Q. Chen, and Z. F. Zhang, "A four-degree-offreedomlaser measurement system (FDMS) using a single-mode fiber-coupled laser module,"Sensors and Actuators a-Physical, 125, 100-108, 2005.
  • C. F. Kuang, E. Hong, and J. Ni, "A high-precision five-degree-of-freedom measurementsystem based on laser collimator and interferometry techniques," Review of Scientific Instruments,78, 2007.
  • C. F. Kuang, E. Hong, Q. B. Feng, B. Zhang, and Z. F. Zhang, "A novel method to enhance thesensitivity for two-degrees-of-freedom straightness measurement," Measurement Science &Technology, 18, 3795-3800, 2007.
  • C. Chou, L. Y. Chou, C. K. Peng, Y. C. Huang, and K. C. Fan, "CCD-based CMM geometricalerror measurement using Fourier phase shift algorithm," International Journal of Machine Tools &Manufacture, 37, 579-590, 1997.
  • C. Brecher, P. Utsch, R. Klar, and C. Wenzel, "Compact design for high precision machine tools,"International Journal of Machine Tools & Manufacture, 50, 328-334, 2010.
  • B. S. Kim, S. K. Ro, and J. K. Park, "Development of a 3-axis Desktop Milling Machine and aCNC System Using Advanced Modern Control Algorithms," International Journal of PrecisionEngineering and Manufacturing, 11, 39-47, 2010.
  • B. Muralikrishnan, J. A. Stone, and J. R. Stoup, "Fiber deflection probe for small holemetrology," Precision Engineering-Journal of the International Societies for Precision Engineeringand Nanotechnology, 30, 154-164, 2006.
  • B. Bringmann and A. Kung, "A measuring artefact for true 3D machine testing and calibration,"Cirp Annals-Manufacturing Technology, 54, 471-474, 2005.
  • A. Wozniak and M. Dobosz, "Metrological feasibilities of CMM touch trigger probes. Part I:3D theoretical model of probe pretravel," Measurement, 34, 273-286, 2003.
  • A. Wozniak and M. Dobosz, "Influence of measured objects parameters on CMM touch triggerprobe accuracy of probing," Precision Engineering-Journal of the International Societies forPrecision Engineering and Nanotechnology, 29, 290-297, 2005.
  • A. Weckenmann, G. Peggs, and J. Hoffmann, "Probing systems for dimensional micro- andnano-metrology," Measurement Science & Technology, 17, 504-509, 2006.
  • A. Tibrewala, A. Phataralaoha, and S. Buttgenbach, "Development, fabrication andcharacterization of a 3D tactile sensor," Journal of Micromechanics and Microengineering, 19, 2009.
  • A. Rak and A. Wo?niak, "Probe radius correction methods - review and comparison of existingmethods," Journal of Automation Mobile Robotics and Intelligent Systems, Vol. 3, No. 4, 169-171,2009.
  • A. Honegger, S. G. Kapoor, and R. E. Devor, "A hybrid methodology for kinematic calibrationof micro/meso-scale machine tools (mMTs)," Journal of Manufacturing Science and Engineering-Transactions of the Asme, 128, 513-522, 2006.