'
Novel Dual-Stator Spoke-Type Permanent Magnet Vernier Machines for the Improvement of Torque Density and Power Factor' 의 주제별 논문영향력
논문영향력 요약
주제
permanent magnet
power factor
torque density
vernier machine
동일주제 총논문수
논문피인용 총횟수
주제별 논문영향력의 평균
96
0
0.0%
주제별 논문영향력
논문영향력
주제
주제별 논문수
주제별 피인용횟수
주제별 논문영향력
주제어
permanent magnet
62
0
0.0%
power factor
25
0
0.0%
torque density
8
0
0.0%
vernier machine
1
0
0.0%
계
96
0
0.0%
* 다른 주제어 보유 논문에서 피인용된 횟수
0
'
Novel Dual-Stator Spoke-Type Permanent Magnet Vernier Machines for the Improvement of Torque Density and Power Factor' 의 참고문헌
石崎彰, 柴田幸也, 渡邉勝之, and 斎藤和夫, “Low speed high torque drive system applying vernier motor torque,” 電気学会論文誌. D, 平成3年.
Z. Q. Zhu and D. Howe, “Instantaneous magnetic field distribution in brushless permanent magnet DC motors. III. Effect of stator slotting,” IEEE Trans. Magn., vol. 29, no. 1, pp.143-151, Jan. 1993.
Y. S. Park, S. M. Jang, J. H. Choi, J. Y. Choi, and D. J. You, “Characteristic analysis on axial flux permanent magnet synchronous generator considering wind turbine characteristics according to wind speed for small-scale power application,” IEEE Trans. Magn., vol. 48, no. 11, pp. 2937-2940, Nov. 2012.
Y. M. You, H. Lin, and B. I. Kwon, “Optimal design of a distributed winding type axial flux permanent magnet synchronous generator,” Journal of Electrical Engineering & Technology, vol. 7, no. 1, pp. 69-74, 2012.
Y. Kataoka, M. Takayama, Y. Matsushima, and Y. Anazawa, “Investigation of magnetic pole combination in a surface permanent magnet type vernier motor,” Journal of magnetic society of Japan, 2013.
Y. Kano, K. Tonogi, T. Kosaka, and N. Matsui, “Torque-maximizing design of double-stator, axial-flux, PM machines using simple non-linear magnetic analysis,” in Proc. IEEE/IAS 42th Annual Meeting Industry Application Conf., pp. 875-881, Sep. 2007.
X. Yang, D. Patterson, J. Hudgins, and J. Colton, “FEA estimation and experimental validation of solid rotor and magnet eddy current loss in single-sided axial flux permanent magnet machines,” in Proc. ECCE, Denver, CO, Sep. 2013.
T. A. Lipo, Introduction to AC machine design, (book) University of Wisconsin-WEMPEC, 3rd ed., pp. 95-101, 2007.
S. Taibi, A. Tounzi and F. Piriou, “Study of a stator current excited vernier reluctance machine,” IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 823-831, Dec. 2006.
S. Niu, S. L. Ho, W. N. Fu, and L. L. Wang, “Quantitative comparison of novel vernier permanent magnet machines,” IEEE Trans. Magn., vol. 46, no. 6, pp. 2032-2035, Jun. 2010.
S. M. Jang, M. M. Koo, Y. S. Park, J. Y. Choi, and S. H. Lee, “Characteristic analysis on the influence of misaligned rotor position of double-sided axial flux permanent magnet machine and experimental verification,” IEEE Trans. Magn., vol. 48, no. 11, pp. 2941-2944, Nov. 2012.
S. L. Ho, Shuangxia Niu and W. N. Fu, “Design and comparison of vernier permanent magnet machines,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3280-3283, Oct. 2011.
S. A. Gholamian, “Evaluation of power density for three phase double-sided axial flux slotted PM generator,” in Proc. IJCSEA, vol. 1, no. 6, Dec. 2011.
R. Qu, D. Li and J. Wang, “Relationship between magnetic gears and vernier machines,” in Proc. ICEMS, Bejing, pp. 1–6, 2011.
P. S. Shin, S. H. Woo, Y. L. Zhang, and C. S. Koh, “An application of Latin Hypercube Sampling strategy for cogging torque reduction of large-scale permanent magnet motor,” IEEE Trans. Magn., vol. 44, no. 11, pp. 4421-4424, Nov. 2008.
P. Bolognesi, O. Bruno, and L. Taponecco, “A switched reluctance machine for high-torque low-speed applications,” in Proc. of EPE, Dresden, 2005.
N. N. Zhao, Z. Q. Zhu, and W. G. Liu, “Comparison of rotor eddy current losses in permanent magnet motor and generator,” in Proc. ICEMS, Beijing, Aug. 2011.
M. Takano and S. Shimomura, “Improvement of torque density of variable reluctance vernier machine for hybrid electric vehicle,” in Proc. ECCE, Denver, 2013.
M. R. Harris, G. H. Pajooman, and S. M. Abu Sharkh, “The problem of power factor in VRPM (transverse-flux) machines,” in Proc. of ICEMD, no. 444, pp. 386-390, Sep. 1997.
M. M. Koo, J. Y. Choi, Y. S. Park, and S. M. Jang, “Influence of rotor overhang variation on generating performance of axial flux permanent magnet machine based on 3-D analytical method,” IEEE Trans. Magn., vol. 50, no. 11, Nov. 2014.
M. Lin, H. Li, X. Li, X. Zhao, and Z. Q. Zhu, “A novel axial field flux-switching permanent magnet wind power generator,” IEEE Trans. Magn., vol. 47, no. 10, pp. 4457-4460, Oct. 2011.
M. L. Mohd Jamil, Z. Z. Zolkapli, A. Jidin, S. M. Al-Habshi, and M. N. Othman, “Electromagnetic performance of high-torque and low-speed PM brushless machines,” in Proc. PEOCO, Langkawi, 2014.
M. G. Sim es and P. J. Vieira, “A high-torque low-speed multiphase brushless machine - a perspective application for electric vehicles,” IEEE Trans. Ind. Electron. vol. 49, no. 5, pp.1154-1164, Oct. 2002.
M. A. Mueller and N. J. Baker, “Modelling the performance of the vernier hybrid machine,” in Proc. EPA, vol. 150, no. 6, pp. 647-654, Nov. 2003.
L. N. Jian, K. T. Chau, and J. Z. Jiang, “A magnetic-geared outer-rotor permanent-magnet brushless machine for wind power generation,” IEEE Trans. Ind. Appl., vol. 45, no. 3, pp. 954-962, 2009.
L. Lebensztajn, C. A. R. Marretto, M. C. Costa, and J. L. Coulomb, “Kriging: a useful tool for electromagnetic device optimization,” IEEE Trans. Magn., vol. 40, no. 2, pp. 1196-1199, Mar. 2004.
L. Jian, K. T. Chau, and J. Z. Jiang, “A magnetic-geared outer-rotor permanent-magnet brushless machine for wind power generation,” IEEE Trans. Ind. Appl., vol. 45, no. 3 pp. 954-962, 2009.
K. Y. Hwang, L. Hai, S. H. Rhyu, and B. I. Kwon, “A study on the novel coefficient modeling for a skewed permanent magnet and overhang structure for optimal design of brushless DC motor,” IEEE Trans. Magn., vol. 48, no. 5, pp. 1918-1923, May 2012.
K. C. Kim, D. H. Koo, and J. Lee, “The study on the overhang coefficient for permanent magnet machine by experimental design method,” IEEE Trans. Magn., vol. 43, no. 6, pp. 2483-2485, Jun. 2007.
K. Atallah, S. Calverley, R. Clark, J. Rens, and D. Howe, “A new PM machine topology for low-speed, high-torque drives,” in Proc. ICEM, Vilamoura, 2008.
K. Atallah and D. Howe, “A novel high-performance magnetic gear,” IEEE Trans. Magn., vol. 37, no. 4, pp: 2844-2846, 2001.
J. S. D. Garcia, M. V. Ferreira da luz, J. P. A. Bastos, and N. Sadowski, “Transverse Flux Machines: What for,” IEEE Multidisciplinary Engineering Education Magazine, Vol. 2, No. 1, March 2007.
J. M. Crider and S. D. Sudhoff, “An inner rotor flux-modulated permanent magnet synchronous machine for low-speed high-torque applications,” IEEE Trans. Energy Convers., no. 99, pp.1-8, April. 2015.
J. Li, K. T. Chau, and W. L. Li, “Harmonic analysis and comparison of permanent magnet vernier and magnetic-geared machines,” IEEE Trans. Magn., vol. 47, no. 10, pp. 3649-3652, Oct. 2011.
J. Li, K. T. Chau, J. Z. Jiang, C. H. Liu and W. L. Li, “A new efficient permanent-magnet vernier machine for wind power generation,” IEEE Trans. Magn., vol. 46, no. 6, pp. 1475-1478, Jun. 2010.
J. Li and Y. H. Choi, “Modeling and analysis of fractional slot axial flux permanent magnet machine considering overhang effect,” in Proc. CEFC, Chicago, IL, 2010.
J. B. Kim, K. Y. Hwang, and B. I. Kwon, “Optimization of two-phase in-wheel IPMSM for wide speed range by using the Kriging model based on Latin Hypercube Sampling,” IEEE Trans. Magn., vol. 47, no. 5, pp. 1078-1081, May 2011.
I. B, Orlik, Transverse Flux Generators – Principle and Operation Behaviour. IALB, University Bremen.
F. Zhao, T. A. Lipo, and B. I. Kwon, “Dual-stator interior permanent magnet vernier machine having torque density and power factor improvement,” Electric Power Components and Systems, vol.42, no.15, pp. 1717-1726, Oct. 2014.
F. Zhao, T. A. Lipo, and B. I. Kwon, “A novel two-phase permanent magnet synchronous motor modeling for torque ripple minimization,” IEEE Trans. Magn., vol. 49, no. 5, pp. 2355-2358, May, 2013.
F. Zhao, T. A. Lipo, and B. I. Kwon, “A novel dual-stator axial-flux spoke-type permanent magnet vernier machine for direct drive applications,” IEEE Trans. Magn., vol. 50, no. 11, Nov. 2014.
F. Zhao, T. A. Lipo and B. I. Kwon, “Magnet flux focusing design of double stator permanent magnet vernier machine,” in Proc. COMPUMAG, Hungary, July 2013.
E. Spooner, P. Taver, M.A. Mueeler, P. R. M. Brooking and N. J. Baker, “Vernier hybrid machines for compact drive applications,” in Proc. PEMD, April 2004.
E. Spooner and L. Haydock, “Vernier hybrid machines,” in Proc. EPA, vol. 150, no. 6, pp. 655-662, Nov. 2003.
D. S. Weile and E. Michielssen, “Genetic algorithm optimization applied to electromagnetics: A review,” IEEE Trans. Antennas Propag., vol. 45, no. 3, pp. 343-353, Mar. 1997.
D. Li and R. Qu. “Sinusoidal back-EMF of vernier permanent magnet machines,” in Proc. ICEMS, Sapporo, pp. 1-6, 2012.
D. K. Woo, D. K. Lim, H. K. Yeo, J. S. Ro, and H. K. Jung, “A 2-D finite-element analysis for a permanent magnet synchronous motor taking an overhang effect into consideration,” IEEE Trans. Magn., vol. 49, no. 8, pp. 4894-4899, Aug. 2013.
D. J. Evans and Z. Q. Zhu, “Novel partitioned stator switched flux permanent magnet machines,” IEEE Trans. Magn., vol. 51, no. 1, July, 2014.
D. Fukai and S. Shimomura, “Integrated radial and dual axial-flux variable-reluctance vernier machine,” in Proc. IECON, Dallas, 2014.
C. H. Lee, “Vernier motor and its design,” IEEE Trans. Power App. Syst., vol. 82, no. 66, pp. 343-349, 1963.
C. Bianchini, F. Immovilli, E. Lorenzani, A. Bellini, and L. Felici, “Axial flux permanent magnet machine design and optimization using multi-layer 2-D simulation,” in Proc. IECON, Vienna, Austria, pp. 2620-2625, 2013.
B. T. Kim and T. A. Lipo, “Operation and design principles of a PM vernier motor,” in Proc. ECCE, Denver, 2013.
B. Heller and V. Hamata, Harmonic field effects in induction machines, (book) Amsterdam-Oxford-NewYork: Elsevier scientific publishing company, 1977.
Ansoft Maxwell Manual- Training Books, Ansys, 2011. [51] T. Yamaguchi, et al., “3-D finite-element analysis of skewed squirrel-cage induction motor,” IEEE Trans. Magn., vol. 40, no. 2, pp. 969–972, Mar. 2004.
A. Toba and T. A. Lipo, “Novel dual-excitation permanent magnet vernier machine,” in Proc. Conf. Rec. IEEE 34th IAS Annual Meeting, pp. 2539-2544, 1999.
A. Toba and T. A. Lipo, “Generic torque-maximizing design methodology of surface permanent–magnet vernier machine,” IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1539-1546, Nov. /Dec. 2000.
A. Parviainen, M. Niemela, J. Pyrhonen, and J. Mantere, “Performance comparison between low-speed axial-flux and radial-flux permanent magnet machines including mechanical constraints,” in Proc. IEE Int. Conf. Electrical Machines and Drives, pp. 1695-1702, May 2005.
A. Egea,G. Almandoz, J. Poza, and A. Gonzalez, “Axial-Flux-Machine Modeling With the Combination of FEM-2-D and Analytical Tools,” IEEE Trans. Ind. Appl., vol. 48, no. 4, pp. 1318- 1326, Jul./Aug., 2012.
'
Novel Dual-Stator Spoke-Type Permanent Magnet Vernier Machines for the Improvement of Torque Density and Power Factor'
의 유사주제(
) 논문