연구동향 분석
박사

Effect of the coronal wall thickness of dental implant on the screw joint stability in internal implant-abutment connection : 내부연결 원추형 임플란트 벽두께가 연결부 안정성에 미치는 영향

이지혜 2015년

논문상세정보
인용/피인용
' Effect of the coronal wall thickness of dental implant on the screw joint stability in internal implant-abutment connection : 내부연결 원추형 임플란트 벽두께가 연결부 안정성에 미치는 영향' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • axial displacement
  • elastic limit
  • implant diameter
  • implant wall thickness
  • internal conical connection
  • removal torque loss
  • wedge effect
  • yield strength
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
45 0

0.0%

' Effect of the coronal wall thickness of dental implant on the screw joint stability in internal implant-abutment connection : 내부연결 원추형 임플란트 벽두께가 연결부 안정성에 미치는 영향' 의 참고문헌

  • van Steenberghe D. A retrospective multicenter evaluation of the survival rate of osseointegrated fixtures supporting fixed partial prostheses in the treatment of partial edentulism. J Prosthet Dent 1989;61:217-23.
  • Zinsli B, Sagesser T, Mericske E, Mericske-Stern R. Clinical evaluation of small-diameter ITI implants: a prospective study. Int J Oral Maxillofac Implants 2004;19:92-9.
  • Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto Study. Part II: The prosthetic results. J Prosthet Dent 1990;64:53-61.
  • Zabler S, Rack T, Rack A, Nelson K. Fatigue induced deformation of taper connection in dental titanium implants. Int J Mat Res 2012;103:207-16.
  • Yang J, Wang K, Liu G, Wang D. Fracture resistance of inter-joined zirconia abutment of dental implant system with injection molding technique. Clin Oral Implants Res 2012.
  • Yamanishi Y, Yamaguchi S, Imazato S, Nakano T, Yatani H. Influences of implant neck design and implant-abutment joint type on peri-implant bone stress and abutment micromovement: three-dimensional finite element analysis. Dent Mater 2012;28:1126-33.
  • Wennstr m JL, Ekestubbe A, Gr ndahl K, Karlsson S, Lindhe J. Implantsupported single-tooth restorations: a 5-year prospective study. J Clin Periodontol 2005;32:567-74.
  • Virdee P, Bishop K. A review of the aetiology and management of fractured dental implants and a case report. Br Dent J 2007;203:461-6.
  • Tripodi D, Vantaggiato G, Scarano A, Perrotti V, Piattelli A, Iezzi G, D'Ercole S. An in vitro investigation concerning the bacterial leakage at implants with internal hexagon and Morse taper implant-abutment connections. Implant Dent 2012;21:335-9.
  • Tosun T, Karabuda C, Cuhadaroglu C. Evaluation of sleep bruxism by polysomnographic analysis in patients with dental implants. Int J Oral Maxillofac Implants 2003;18:286-92.
  • Tonella BP, Pellizzer EP, Ferraco R, Falcon-Antenucci RM, Carvalho PS, Goiato MC. Photoelastic analysis of cemented or screwed implant-supported prostheses with different prosthetic connections. J Oral Implantol 2011;37:401-10.
  • Theoharidou A, Petridis HP, Tzannas K, Garefis P. Abutment screw loosening in single-implant restorations: a systematic review. Int J Oral Maxillofac Implants 2008;23:681-90.
  • Sumi T, Braian M, Shimada A, Shibata N, Takeshita K, Vandeweghe S, Coelho PG, Wennerberg A, Jimbo R. Characteristics of implant-CAD/CAM abutment connections of two different internal connection systems. J Oral Rehabil 2012;39:391-8.
  • Steinemann SG. Titanium--the material of choice? Periodontol 2000 1998;17:7-21.
  • Shin HM, Huh JB, Yun MJ, Jeon YC, Chang BM, Jeong CM. Influence of the implant-abutment connection design and diameter on the screw joint stability. J Adv Prosthodont 2014;6:126-32.
  • Shemtov-Yona K, Rittel D, Machtei EE, Levin L. Effect of dental implant diameter on fatigue performance. Part II: failure analysis. Clin Implant Dent Relat Res 2014;16:178-84.
  • Shemtov-Yona K, Rittel D, Levin L, Machtei EE. Effect of dental implant diameter on fatigue performance. Part I: mechanical behavior. Clin Implant Dent Relat Res 2014;16:172-7.
  • Seetoh YL, Tan KB, Chua EK, Quek HC, Nicholls JI. Load fatigue performance of conical implant-abutment connections. Int J Oral Maxillofac Implants 2011;26:797-806.
  • Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res 2000;11:156-8.
  • Rodrigues Neto DJ, Cerutti-Kopplin D, do Valle AL, Pereira JR. A method of assessing the effectiveness of the friction fit interface by measuring reverse torque. J Prosthet Dent 2014;112:839-42.
  • Ricciardi Coppede A, de Mattos Mda G, Rodrigues RC, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study. Clin Oral Implants Res 2009;20:624-32.
  • Rangert B, Krogh PH, Langer B, Van Roekel N. Bending overload and implant fracture: a retrospective clinical analysis. Int J Oral Maxillofac Implants 1995;10:326-34.
  • Rack T, Zabler S, Rack A, Riesemeier H, Nelson K. An in vitro pilot study of abutment stability during loading in new and fatigue-loaded conical dental implants using synchrotron-based radiography. Int J Oral Maxillofac Implants 2013;28:44-50.
  • Quek HC, Tan KB, Nicholls JI. Load fatigue performance of four implantabutment interface designs: effect of torque level and implant system. Int J Oral Maxillofac Implants 2008;23:253-62.
  • Polizzi G, Fabbro S, Furri M, Herrmann I, Squarzoni S. Clinical application of narrow Br nemark System implants for single-tooth restorations. Int J Oral Maxillofac Implants 1999;14:496-503.
  • Pintinha M, Camarini ET, Sabio S, Pereira JR. Effect of mechanical loading on the removal torque of different types of tapered connection abutments for dental implants. J Prosthet Dent 2013;110:383-8.
  • Piermatti J, Yousef H, Luke A, Mahevich R, Weiner S. An in vitro analysis of implant screw torque loss with external hex and internal connection implant systems. Implant Dent 2006;15:427-35.
  • Piattelli A, Scarano A, Piattelli M, Vaia E, Matarasso S. Hollow implants retrieved for fracture: a light and scanning electron microscope analysis of 4 cases. J Periodontol 1998;69:185-9.
  • Petrie CS, Williams JL. Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest. A three-dimensional finite-element analysis. Clin Oral Implants Res 2005;16:486-94.
  • Pessoa RS, Muraru L, Junior EM, Vaz LG, Sloten JV, Duyck J, Jaecques SV. Influence of implant connection type on the biomechanical environment of immediately placed implants - CT-based nonlinear, three-dimensional finite element analysis. Clin Implant Dent Relat Res 2010;12:219-34.
  • Palmer RM, Howe LC, Palmer PJ, Wilson R. A prospective clinical trial of single Astra Tech 4.0 or 5.0 diameter implants used to support two-unit cantilever bridges: results after 3 years. Clin Oral Implants Res 2012;23:35- 40.
  • P rez MA. Life prediction of different commercial dental implants as influence by uncertainties in their fatigue material properties and loading conditions. Comput Methods Programs Biomed 2012;108:1277-86.
  • Nystrom FE, Barlam DM, Klenbonov BM. Machine Elements: Life and design: CRC Press; 2007.
  • Norton MR. Understanding the intimate relationship between biomechanics and optimal clinical performance: application of implant design. Compend Contin Educ Dent 2002;23:21-5.
  • Norton MR. Assessment of cold welding properties of the internal conical interface of two commercially available implant systems. J Prosthet Dent 1999;81:159-66.
  • Norton MR. An in vitro evaluation of the strength of a 1-piece and 2-piece conical abutment joint in implant design. Clin Oral Implants Res 2000;11:458-64.
  • Nedir R, Bischof M, Szmukler-Moncler S, Belser UC, Samson J. Prosthetic complications with dental implants: from an up-to-8-year experience in private practice. Int J Oral Maxillofac Implants 2006;21:919-28.
  • Nagasawa S, Hayano K, Niino T, Yamakura K, Yoshida T, Mizoguchi T, Terashima N, Tamura K, Ito M, Yagasaki H, Kubota O, Yoshimura M. Nonlinear stress analysis of titanium implants by finite element method. Dent Mater J 2008;27:633-9.
  • Naert I, Quirynen M, van Steenberghe D, Darius P. A six-year prosthodontic study of 509 consecutively inserted implants for the treatment of partial edentulism. J Prosthet Dent 1992;67:236-45.
  • Messler RW. Joining of materials and structures: from pragmatic process to enabling technology: Butterworth-Heinemann; 2004.
  • Merz BR, Hunenbart S, Belser UC. Mechanics of the implant-abutment connection: an 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-26.
  • McGlumphy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am, 1998, 42 : 71-89
  • McCracken M. Dental implant materials: commercially pure titanium and titanium alloys. J Prosthodont 1999;8:40-3.
  • Martin WC, Woody RD, Miller BH, Miller AW. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32.
  • Manzoor B, Suleiman M, Palmer RM. The effects of simulated bone loss on the implant-abutment assembly and likelihood of fracture: an in vitro study. Int J Oral Maxillofac Implants 2013;28:729-38.
  • Maeda Y, Satoh T, Sogo M. In vitro differences of stress concentrations for internal and external hex implant-abutment connections: a short communication. J Oral Rehabil 2006;33:75-8.
  • Lemons JE, Dietsh-Misch F. Biomaterials for dental implants. Contemporary Implant Dentistry. Missouri: Mosby; 1999.
  • Lee JS, Lee JS. Effect of various abutment systems on the removal torque and the abutment settling in the conical connection implant systems. J Korean Acad Prosthodont 2012;50:92-8.
  • Lee JH, Kim DG, Park CJ, Cho LR. Axial displacements in external and internal implant-abutment connection. Clin Oral Implants Res 2014;25:e83-9.
  • Lee FK, Tan KB, Nicholls JI. Critical bending moment of four implantabutment interface designs. Int J Oral Maxillofac Implants 2010;25:744-51.
  • Lee CK, Karl M, Kelly JR. Evaluation of test protocol variables for dental implant fatigue research. Dent Mater 2009;25:1419-25.
  • Koutouzis T, Wallet S, Calderon N, Lundgren T. Bacterial colonization of the implant-abutment interface using an in vitro dynamic loading model. J Periodontol 2011;82:613-8.
  • Klotz MW, Taylor TD, Goldberg AJ. Wear at the titanium-zirconia implantabutment interface: a pilot study. Int J Oral Maxillofac Implants 2011;26:970-5.
  • Kim KS, Lim YJ, Kim MJ, Kwon HB, Yang JH, Lee JB, Yim SH. Variation in the total lengths of abutment/implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection. Clin Oral Implants Res 2011;22:834-9.
  • Kim KS, Han JS, Lim YJ. Settling of abutments into implants and changes in removal torque in five different implant-abutment connections. Part 1: Cyclic loading. Int J Oral Maxillofac Implants 2014;29:1079-84.
  • Khraisat A, Stegaroiu R, Nomura S, Miyakawa O. Fatigue resistance of two implant/abutment joint designs. J Prosthet Dent 2002;88:604-10.
  • Khraisat A, Abu-Hammad O, Al-Kayed AM, Dar-Odeh N. Stability of the implant/abutment joint in a single-tooth external-hexagon implant system: clinical and mechanical review. Clin Implant Dent Relat Res 2004;6:222-9.
  • Kano SC, Binon P, Bonfante G, Curtis DA. Effect of casting procedures on screw loosening in UCLA-type abutments. J Prosthodont 2006;15:77-81.
  • Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-9.
  • Jimbo R, Halldin A, Janda M, Wennerberg A, Vandeweghe S. Vertical fracture and marginal bone loss of internal-connection implants: a finite element analysis. Int J Oral Maxillofac Implants 2013;28:e171-6.
  • Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Br nemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants 1991;6:270-6.
  • J rn D, Kohorst P, Besdo S, R cker M, Stiesch M, Borchers L. Influence of lubricant on screw preload and stresses in a finite element model for a dental implant. J Prosthet Dent 2014;112:340-8.
  • International Organization for Standardization. ISO standards handbook. Gen ve, Switzerland: International Organization for Standardization. p. v.
  • Hsu YT, Fu JH, Al-Hezaimi K, Wang HL. Biomechanical implant treatment complications: a systematic review of clinical studies of implants with at least 1 year of functional loading. Int J Oral Maxillofac Implants 2012;27:894-904.
  • Ha CY, Lim YJ, Kim MJ, Choi JH. The influence of abutment angulation on screw loosening of implants in the anterior maxilla. Int J Oral Maxillofac Implants 2011;26:45-55.
  • Guan H, van Staden R, Loo YC, Johnson N, Ivanovski S, Meredith N. Evaluation of multiple implant-bone parameters on stress characteristics in the mandible under traumatic loading conditions. Int J Oral Maxillofac Implants 2010;25:461-72.
  • Gotfredsen K. A 5-year prospective study of single-tooth replacements supported by the Astra Tech implant: a pilot study. Clin Implant Dent Relat Res 2004;6:1-8.
  • Goodacre CJ, Kan JY, Rungcharassaeng K. Clinical complications of osseointegrated implants. J Prosthet Dent 1999;81:537-52.
  • Gehrke SA, de Araujo Pereira F. Changes in the abutment-implant interface in morse taper implant connections after mechanical cycling: a pilot study. Int J Oral Maxillofac Implants 2014;29:791-7.
  • Gealh WC, Mazzo V, Barbi F, Camarini ET. Osseointegrated implant fracture: causes and treatment. J Oral Implantol 2011;37:499-503.
  • Gargallo Albiol J, Satorres-Nieto M, Puyuelo Capablo JL, Sanchez Garces MA, Pi Urgell J, Gay Escoda C. Endosseous dental implant fractures: an analysis of 21 cases. Med Oral Patol Oral Cir Bucal 2008;13:e124-8.
  • Frost HM. Skeletal structural adaptations to mechanical usage (SATMU): 2. Redefining Wolff's law: the remodeling problem. Anat Rec 1990;226:414-22.
  • Frost HM. Perspectives: bone's mechanical usage windows. Bone Miner 1992;19:257-71.
  • Frost HM. A 2003 update of bone physiology and Wolff's Law for clinicians. Angle Orthod 2004;74:3-15.
  • Flanagan D, Phillips J, Connor M, Dyer T, Kazerounian K. Hoop Stress and the Conical Connection. J Oral Implantol 2013.
  • Ferrario VF, Sforza C, Serrao G, Dellavia C, Tartaglia GM. Single tooth bite forces in healthy young adults. J Oral Rehabil 2004;31:18-22.
  • Eckert SE, Meraw SJ, Cal E, Ow RK. Analysis of incidence and associated factors with fractured implants: a retrospective study. Int J Oral Maxillofac Implants 2000;15:662-7.
  • Dittmer S, Dittmer MP, Kohorst P, Jendras M, Borchers L, Stiesch M. Effect of implant-abutment connection design on load bearing capacity and failure mode of implants. J Prosthodont 2011;20:510-6.
  • Ding X, Zhu XH, Zhang XH, Liao SH, Zhang L, Chen H. [Three dimension finite element analysis of anisotropic mandible with dental implants effect on implant-bone interface]. Zhonghua Kou Qiang Yi Xue Za Zhi 2009;44:41-5.
  • Dibart S, Warbington M, Su MF, Skobe Z. In vitro evaluation of the implantabutment bacterial seal: the locking taper system. Int J Oral Maxillofac Implants 2005;20:732-7.
  • DiPede L, Alhashim A, Vaidyanathan TK, Flinton R. Fracture resistance of soft tissue level implants after cyclic loading and external modification. J Prosthet Dent 2013;109:30-6.
  • Degidi M, Piattelli A, Carinci F. Clinical outcome of narrow diameter implants: a retrospective study of 510 implants. J Periodontol 2008;79:49-54.
  • Davarpanah M, Martinez H, Tecucianu JF, Celletti R, Lazzara R. Smalldiameter implants: indications and contraindications. J Esthet Dent 2000;12:186-94.
  • Copped AR, Bersani E, de Mattos Mda G, Rodrigues RC, Sartori IA, Ribeiro RF. Fracture resistance of the implant-abutment connection in implants with internal hex and internal conical connections under oblique compressive loading: an in vitro study. Int J Prosthodont 2009;22:283-6.
  • Conrad HJ, Schulte JK, Vallee MC. Fractures related to occlusal overload with single posterior implants: a clinical report. J Prosthet Dent 2008;99:251- 6.
  • Cho SY, Cho LR. A 3-dimensional finite element analysis on the stress distribution of internal implant-adutment connection [Thesis]: Gangneung- Wonju national university; 2014.
  • Chao EY. A composite fixation principle for modular segmental defect replacement (SDR) prostheses. Orthop Clin North Am 1989;20:439-53.
  • Chan HL, Oh WS, Ong HS, Fu JH, Steigmann M, Sierraalta M, Wang HL. Impact of implantoplasty on strength of the implant-abutment complex. Int J Oral Maxillofac Implants 2013;28:1530-5.
  • Cha HS, Kim YS, Jeon JH, Lee JH. Cumulative survival rate and complication rates of single-tooth implant; focused on the coronal fracture of fixture in the internal connection implant. J Oral Rehabil 2013;40:595-602.
  • Carr AB, Brunski JB, Hurley E. Effects of fabrication, finishing, and polishing procedures on preload in prostheses using conventional "gold' and plastic cylinders. Int J Oral Maxillofac Implants 1996;11:589-98.
  • Capodiferro S, Favia G, Scivetti M, De Frenza G, Grassi R. Clinical management and microscopic characterisation of fatigue-induced failure of a dental implant. Case report. Head Face Med 2006;2:18.
  • Byrne D, Jacobs S, O'Connell B, Houston F, Claffey N. Preloads generated with repeated tightening in three types of screws used in dental implant assemblies. J Prosthodont 2006;15:164-71.
  • Burguete RL, Johns RB, King T, Patterson EA. Tightening characteristics for screwed joints in osseointegrated dental implants. J Prosthet Dent 1994;71:592-9.
  • Budynas RG, Nisbett JK. Shigley's mechanical engineering design. 9th ed. New York: McGraw-Hill; 2011.
  • Bozkaya D, M ft S. Mechanics of the tapered interference fit in dental implants. J Biomech 2003;36:1649-58.
  • Blevins FT, Deng X, Torzilli PA, Dines D, Warren RF. Dissociation of modular humeral head components: a biomechanical and implant retrieval study. J Shoulder Elbow Surg 1997;6:113-24.
  • Binon PP. Implants and components: entering the new millennium. Int J Oral Maxillofac Implants 2000;15:76-94.
  • Binon PP. Evaluation of machining accuracy and consistency of selected implants, standard abutments, and laboratory analogs. Int J Prosthodont 1995;8:162-78.
  • Binon PP, McHugh MJ. The effect of eliminating implant/abutmentrotational misfit on screw joint stability. Int J Prosthodont 1996;9:511-9.
  • Bernardes SR, da Gloria Chiarello de Mattos M, Hobkirk J, Ribeiro RF. Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences. Int J Oral Maxillofac Implants 2014;29:89-96.
  • Balshi TJ. An analysis and management of fractured implants: a clinical report. Int J Oral Maxillofac Implants 1996;11:660-6.
  • Baixe S, Fauxpoint G, Arntz Y, Etienne O. Microgap between zirconia abutments and titanium implants. Int J Oral Maxillofac Implants 2010;25:455-60.
  • Anitua E, Tapia R, Luzuriaga F, Orive G. Influence of implant length, diameter, and geometry on stress distribution: a finite element analysis. Int J Periodontics Restorative Dent 2010;30:89-95.
  • Andersson B, Glauser R, Maglione M, Taylor A. Ceramic implant abutments for short-span FPDs: a prospective 5-year multicenter study. Int J Prosthodont 2003;16:640-6.
  • Almeida EO, Freitas Junior AC, Bonfante EA, Rocha EP, Silva NR, Coelho PG. Effect of microthread presence and restoration design (screw versus cemented) in dental implant reliability and failure modes. Clin Oral Implants Res 2013;24:191-6.
  • Ahlberg JP, Kovero OA, Hurmerinta KA, Zepa I, Nissinen MJ, Kononen MH. Maximal bite force and its association with signs and symptoms of TMD, occlusion, and body mass index in a cohort of young adults. Cranio 2003;21:248-52.
  • Aguirrebeitia J, Muftu S, Abasolo M, Vallejo J. Experimental study of the removal force in tapered implant-abutment interfaces: a pilot study. J Prosthet Dent 2014;111:293-300.
  • Aguirrebeitia J, Abasolo M, Vallejo J, Ansola R. Dental implants with conical implant-abutment interface: influence of the conical angle difference on the mechanical behavior of the implant. Int J Oral Maxillofac Implants 2013;28:e72-82.
  • Adell R. Clinical results of osseointegrated implants supporting fixed prostheses in edentulous jaws. J Prosthet Dent 1983;50:251-4.
  • Adell R, Lekholm U, Rockler B, Br nemark PI. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 1981;10:387-416.
  • Adell R, Eriksson B, Lekholm U, Br nemark PI, Jemt T. Long-term followup study of osseointegrated implants in the treatment of totally edentulous jaws. Int J Oral Maxillofac Implants 1990;5:347-59.
  • Acocella A, Bertolai R, Sacco R. Modified insertion technique for immediate implant placement into fresh extraction socket in the first maxillary molar sites: a 3-year prospective study. Implant Dent 2010;19:220-8.
  • ?1. Norton MR. An in vitro evaluation of the strength of an internal conical interface compared to a butt joint interface in implant design. Clin Oral Implants Res 1997;8:290-8.