박사

공동주택의 바닥충격음 영향요인 분석 = Analysis of Influence Factors of

문대호 2015년
' 공동주택의 바닥충격음 영향요인 분석 = Analysis of Influence Factors of' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • bang machine
  • fft
  • floor impact noise
  • impact sound pressure level
  • 구조시스템
  • 뜬바닥구조
  • 바닥구조
  • 바닥마감재
  • 바닥충격음
  • 뱅머신
  • 시스템해석
  • 신호처리
  • 옥타브
  • 완충재
  • 유한요소
  • 음향모드
  • 임팩트볼
  • 주파수 분석
  • 주파수 응답함수
  • 중량 충격원
  • 천장구조
  • 충격력
  • 태핑머신
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
342 0

0.0%

' 공동주택의 바닥충격음 영향요인 분석 = Analysis of Influence Factors of' 의 참고문헌

  • 공동주택 층간소음 실태조사,
    국립환경과학원, 환경기반연구부, 생활환경연구과, and 한. 산학협력단 [2011]
  • 공동주택 중량바닥충격음저감을 위한 기술개발 방향설정 연구,
    한국토지주택공사-토지주택연구원 [2013]
  • 건설교통부
    공동주택 바닥충격음 차단구조 인정 및 관리기준, ed [2014]
  • Y. G. Oh, M. K. Joo, J. Y. Park, H. G. Kim, and K. S. Yang, "Deviationof Heavy-Weight Floor Impact Sound Levels According toMeasurement Positions," The Journal of the Acoustical Society ofKorea vol. 25, pp. 49-55, 2006.
  • S. Y. Yang, D. H. Lee, B. K. Hong, H. Y. Sond, and J. W. Lee,"Comparison between the Dynamic Properties and Noise IsolationPerformances," Proceedings of the KSNVE Annual SpringConference, 2005.
  • S. H. Lee, G. C. Jeong, and J. Y. Chung, "Vibration Isolation Effect ofFloor Impact Sound by Ceiling Structure," Proceedings of theKSNVE Annual Fall Conference, 2004.
  • S. H. Kim, J. H. Kim, and H. K. Lee, "Prediction of the Exciting Forceof Machine and the Vibration Response of Floor Using TransferFunction Method," Transactions of the Korean Society for Noise andVibration Engineering, vol. 2, pp. 273-280, 1992.
  • P. M. Morese and K. U. Ingard, Theoretical Acoustic: PrincetonUniversity Press, 1968.
  • N. G. Ki and S. W. Kim, "A Study on the Improvement Floor ImpactReferences471Sound Insulation by Ceiling Structure in Apartment Houses,"Proceedings of the KSNVE Annual Spring Conference, 2007.
  • N. G. Gi, J. Y. Jung, M. J. Song, and S. W. Kim, "A Study on the FloorImpact Sound Insulation Characteristics of Floor Coverings,"Transactions of the Korean Society for Noise and VibrationEngineering, vol. 23, pp. 645-648, 2003.
  • M. K. Jeong, S. S. Lee, Y. K. Kim, S. K. Ahn, and S. Y. Lee,"Estimation of Dynamic Load of the Utility in Building by TpaMethod," Transactions of the Korean Society for Noise and VibrationEngineering, vol. 19, pp. 773-780, 2009.
  • M. G. Ju, M. H. Han, and Y. G. Oh, "Deviation of Sound PressureLevel in Receiving Room According to the Heavy-Weight FloorImpact Sources and It"S Positions," Journal of the Korea institute ofEcological Architecture and Environment, vol. 9, 2009.
  • K. W. Kim, J. S. Kang, S. E. Lee, and K. S. Yang, "Evaluation of FloorImpact Sound Performance According to the Installation of Ceilingand Wall," Transactions of the Korean Society for Noise and VibrationEngineering, vol. 15, pp. 465-473, 2005.
  • K. W. Kim, J. O. Yeon, and K. S. Yang, "Floor Impact SoundReduction Properties of Flooring Mats," Proceedings of the KSNVEAnnual Fall Conference, 2013.
  • K. W. Kim, J. O. Yeon, and K. S. Yang, "Correspondence Research onLong-Term Compressive Creep of Resilient Materials and Iso 20392,"Transactions of the Korean Society for Noise and VibrationEngineering, vol. 22, pp. 1250-1256, 2012.
  • K. W. Kim, H. J. Choi, K. S. Yang, and S. E. Lee, "An Analysis of theInfluence Factors of Floor Impact Sound Levels," Proceedings of theKSNVE Annual Spring Conference, 2003.
  • K. W. Kim, G. S. Choi, Y. S. Jeong, and K. S. Yang, "Impact PowerCharacteristics as Behavior of Real Impact Source(Child),"Transactions of the Korean Society for Noise and VibrationEngineering, vol. 15, pp. 542-549, 2005.
  • K. W. Kim, G. C. Jeong, and J. Y. Sohn, "Evaluation of the DynamicStiffness and Heavy-Weight Floor Impact Sound Reduction byComposition of Resilient Materials," Transactions of the KoreanSociety for Noise and Vibration Engineering, vol. 18, pp. 247-254,2008.
  • K. W. Kim, G. C. Jeong, and J. Y. Sohn, "Correlation betweenDynamic Stiffness of Resilient Materials and Lightweight FloorImpact Sound Reduction Level," Transactions of the Korean SocietyReferences472for Noise and Vibration Engineering, vol. 18, pp. 886-895, 2008.
  • K. W. Kim, G. C. Jeong, K. S. Yang, and J. Y. Sohn, "Correlationbetween Dynamic Stiffness of Resilient Materials and HeavyweightImpact Sound Reduction Level," Building and Environment, vol. 44,pp. 1589-1600, 2009.
  • K. H. Kim, H. J. Choi, and Y. G. Kim, "Evaluation of Ceiling StructureInfluencing to the Floor Impact Sound," Proceedings of the KSNVEAnnual Fall Conference, 2011.
  • J. Y. Park, G. C. Jeong, and J. B. Im, "A Study of Correlation betweenDynamic Stiffness and Loading Time," Proceedings of the KSNVEAnnual Spring Conference, 2009.
  • J. Y. Jung, S. H. Lee, G. C. Jeong, Y. G. Oh, and M. G. Ju, "A Studyon the Effect by Receiving Points as Measuring Floor Impact Sound,"Proceedings of the KSNVE Annual Spring Conference, 2005.
  • J. Y. Jeon, P. J. Lee, J. H. Jeong, and J. h. Park, "Comparison ofStandard Floor Impact Sources with a Human Impact Source,"Transactions of the Korean Society for Noise and VibrationEngineering, vol. 16, pp. 789-796, 2006.
  • J. Y. Chung, S. W. Lee, J. B. Im, and G. C. Jeong, "Research AboutCorrelation of Slab Vibration Mode and Heavy-Weight Floor ImpactSound " Proceedings of the KSNVE Annual Spring Conference, 2008.
  • J. Y. Chung, J. B. Im, and S. C. Lee, "Comparison of Certified FloorSystem for Impact Sound," Proceedings of the KSNVE Annual SpringConference, 2012.
  • J. W. S. Rayleigh, The Theory of Sound, 2d ed. London,: Macmillanand co., limited, 1937.
  • J. O. Yeon, K. W. Kim, H. J. Choi, K. S. Yang, and K. H. Kim,"Experiment Evaluation for the Heavy-Weight Impact Sound of DryDouble-Floor System - Effect of Rubber Hardness and CeilingStructure -," Transactions of the Korean Society for Noise andVibration Engineering, vol. 23, pp. 34-40, 2013.
  • J. H. Jeong, J. U. Kim, and W. J. Yang, "Sound Field Corection on theMeasurement of Heavy/Soft Impact Sound " Proceedings of theReferences470KSNVE Annual fall Conference, 2012.
  • J. H. Jeong, B. K. Lee, J. O. Yeon, and J. Y. Jeon, "Floor Impact SoundPressure Level Characteristics by the Change of Reverberation Timein Mock-up Test Rooms," Transactions of the Korean Society forNoise and Vibration Engineering, vol. 24, pp. 339-347, 2014.
  • J. H. Jeong, B. K. Lee, J. O. Yeon, and J. Y. Jeon, "Floor Impact SoundPressure Level Characteristics by the Change of Reverberation Timein Mock-up Test Rooms," Transactions of the Korean Society forNoise and Vibration Engineering, vol. 23, pp. 274-281, 2013.
  • J. H. Jeong, "Heavy/Soft Impact Sound in Small Space," Proceedingsof the KSNVE Annual Spring Conference, 2014.
  • J. H. Jeong and J. Y. Jeon, "Floor Impact Noise Measurement andEvaluation Method Using Impact Ball," Transactions of the KoreanReferences469Society for Noise and Vibration Engineering, vol. 15, pp. 1160-1168,2005.
  • J. B. Im, J. Y. Chung, K. W. Kim, and G. C. Jeong, "A Study onDynamic Stiffness of Multi-Layered Damping Materials,"Proceedings of the KSNVE Annual Fall Conference, 2007.
  • I. H. Kim and K. D. Lee, "A Study on the Characteristics of Heavy-Weight Floor Impact Sound in Apartment Houses of the Flat Plate,"Proceedings of the KSNVE Annual Fall Conference, 2009.
  • H. W. Chung, N. G. Gi, M. J. Song, and S. W. Kim, "A Study on theFloor Impact Sound Insulation Characteristics Due to theImprovement of Ceiling Structures ? Focused on the SoundAbsorbing and Snsulation Materials," Journal of the ArchitecturalInstitute of Korea, vol. 17, 2001.
  • H. S. Kim, S. W. Joo, and P. H. Jin, "Analysis of Correlation betweenthe Vibration Transmissions and the Dynamic Characteristics forFloor Impact Sound Insulation Materials through Model Test,"Proceedings of the KSNVE Annual Spring Conference, 2006.
  • H. S. Kim, P. H. Jin, S. W. Joo, and S. W. Jung, "A Study on theDynamic Properties by Loading Time of Floor Impact NoiseInsulation Materials," Proceedings of the KSNVE Annual FallConference, 2005.
  • H. K. Park, K. M. Kin, and S. W. Kim, "Verification of Effectivenessof the Standard Floor Impact Source by Comparing with LivingImpact Sources," Transactions of the Korean Society for Noise andVibration Engineering, vol. 23, pp. 1117-1126, 2013.
  • H. K. Park and S. W. Kim, "Comparison and Analysis ofMeasurement Method of Floor Impact Sound in Apartment withBalcony Remodeling," Journal of the Architectural Institute of Korea,vol. 25, 2009.
  • H. G. P. Dae Ho Mun, Jae Seung Hwang, "Prediction of Concrete SlabAcceleration and Floor Impact Noise Using Frequency ResponseFunction," Transactions of the Korean Society for Noise and VibrationEngineering, vol. 24, pp. 483-492, 2014.
  • H. C. Kim, Y. G. Kim, S. S. Kim, H. L. Lee, and H. H. Cho,"Evaluation of Floor Impact Sound by Floor Coverings in StandardTest Building," Proceedings of the KSNVE Annual Fall Conference,2008.
  • G. G. Song, H. K. Park, T. G. Lee, J. S. Kim, and S. W. Kim, "AnExperimental Study on the Reduction of Lightweight Impact Soundby Floor Coverings in Apartment," Proceedings of the KSNVEAnnual Fall Conference, 2008.
  • G. G. Song, C. S. Lee, and E. S. Choi, "Floor Impact Sound Reductionof Floor Coverings," Proceedings of the KSNVE Annual FallConference, 2013.
  • D. H. Mun, H. G. Park, J. S. Hwang, and G. H. Hong, "An Analysisof Characteristics of Floor Dynamic Properties and Bang-MachineImpact Force on Floating Floor Using System Analysis,"Transactions of the Korean Society for Noise and VibrationEngineering, vol. 24, pp. 390-398, 2014.