연구동향 분석
박사

중량 콘크리트 전단벽의 휨 및 전단 설계모델

문주현 2015년

논문상세정보
인용/피인용
' 중량 콘크리트 전단벽의 휨 및 전단 설계모델' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • 전단 설계
  • 전단벽
  • 중량 콘크리트
  • 휨 설계
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
45 0

0.0%

' 중량 콘크리트 전단벽의 휨 및 전단 설계모델' 의 참고문헌

  • 한국콘크리트학회,최신콘크리트 공학,기문당
    서울,pp [2011]
  • 한국도로교통협회,도로교설계기준
    한국도로교통협회,2012 [2012]
  • 한국공업표준협회,KS기준안,한국공업표준협회
    서울,pp [2013]
  • 철근콘크리트 내력벽의 내진성능,한양대학교,건축공학과
    고강도 윤현도 박사학위논문,,302pp [1994]
  • 벽식구조 아파트 건물의 전단벽에 대한 반응수정계수 평가,한양대 학교,건축공학과
    오영훈 박사학위논문,,291pp [1998]
  • 반복하중을 받는 철근콘크리트 전단벽의 대각보강에 따른 구조성능 평가,경일대학교,건축공학과
    박문수 석사학위논문,,95pp [1998]
  • 반복하중을 받는 철근콘크리트 저형 전단벽의 이력거동,한양대학 교,건축공학과
    최창식 박사학위논문,,284pp [1991]
  • 반복하중을 받는 철근콘크리트 슬리트형 전단벽의 거동 특성에 관 한 실험적 연구,경일대학교,건축공학과
    안준석 석사학위논문,,95pp [1998]
  • 나선철근 배근된 전단벽 단부의 내진성능 연구,서울대학교 건축학 과
    김록배 석사학위논문,,88pp [2002]
  • 고강도 콘크리트 내력벽체의 단부보강에 관한 실험적 연구,건국대 학교,건축공학과
    김명준 박사학위논문,,83pp [1998]
  • “장방형 철근 콘크리트 전단벽의 연성보강
    강수민 박홍근 ”한국콘크리트 학회 논문집,V.14,No.4,,pp.530-539 [2002]
  • “원전용 중량콘크리트의 배합설계 및 역학적 특성,”
    문주현 양근혁 한국건 축시공학회지,V.12,No.3,,pp.9-14 [2012]
  • “단부 횡보강된 구조벽의 모멘트-곡률 관계,”
    강수민 박홍근 한국콘크리트 학회 논문집,V.15,No.2,,pp.323-334 [2003]
  • Zhang,L.X.B.,and Hsu,T.T.C.,“Behaviorand Analysis of100 MPa Concrete Member Membrane Elements,” Journal of Strucutral Engineering,ASCE,V.124,No.1,1998,pp.24-34.
  • Yang,K.H.,“FlexuralBehviourofRC Columns using Wire Ropesas LateralReinforcement,” Magazine ofConcrete Research,V.64,No.3, 2012,pp.269-281.
  • Yang,K.H.,and Ashour,A.F.,“Strut-and-TieModelBased on Crack BandTheoryforDeepBeams,”JournalofStrucuralEngineering,ASCE, V.137,No.10,2011,pp.1030-1038.
  • Yang,K.H.,Mun,J.S.,and Lee,H.,“Workability and Mechanical Properties ofHeavyweightMagnetite Concrete”,ACIMaterials Journal, V.111,No.3,2014,pp.273-282.
  • Yang,K.H.,Mun,J.H.,Cho,M.S.,and Kang,T.H.?K.,“Stress-Strain ModelforVariousUnconfinedConcretesinCompression,”ACIStructural Journal,V.111,No.4,2014,pp.819-826.
  • Yang,K.H.,DevelopmentofPerformance-Based Design Guidelinefor High-Density Concrete Walls,Technical Report (2nd year),Kyonggi University,2013,115pp.
  • Wood,S.L.,“Shearstrengthoflow-risereinforcedconcretewalls,”ACI StructuralJournal,V.87,No.1,1990,pp.99-107.
  • Watson, S., Zahn, F.A., and Park, R., “Confining Reinforced for Concrete Columns”,JournalofStructuralEngineering,ASCE,V.120, No.6,1994,pp.1798-1824.
  • Wallace,J.W.,“Seismic Design ofRC StructuralWalls.PartI:New CodeFormat.”JournalofStructuralEngineering,ASCE,V.121,No.1, 1995,pp.75-87.
  • Wallace,J.W.,“Behavior and Design of High-Strength RC Walls,” High-Strength Concretein SeismicRegions,ACISpecialPublication,V. 176,1998,pp.259-279.
  • Wallace,J.W.,andThomsenIV.J.H.,“SeismicDesign ofRC Structural Walls.PartII:Application,”JournalofStructuralEngineering,ASCE,V. 121,No.1,1995,pp.88-101.
  • Wallace,J.W.,and OrakcalK.“ACI318-99 Provisions for Seismic Design ofStructuralWalls,”ACIStructuralJournal,V.99,No.4,2002, pp.499-508.
  • Wallace,J.W.,and Moehle,J.P.,“Ductility and Detailing Requirements ofBearing WallBuildings,” JournalofStructuralEngineering,V.118, No.6,1992,pp.1625-1644.
  • Van Gysel, A., and Taerwe, L., “Analytical Formulation of the CompleteStress-StrainCurveforHighStrengthConcrete,”Materialsand Structures,V.29,1996,pp.529-533.
  • Thomsen,IV.J.H,and Wallace,J.H.,Displacement-Based Design of RC Structural Walls: An Experimental Investigation of Walls with Rectangular and T-Shaped Cross Sections, Technical Report NSF-BCS-9112962, Department of Civil Engineering, 2005, Clarkson University,USA.
  • Thomsen IV,J.H.,and Wallace,J.H.,“Displacement-Based Design of SlenderReinforced Concrete StructuralWalls-ExperimentalVerification,” Journal ofStructural Engineering, ASCE, V.130,No.4,2004,pp. 618-630.
  • Tasnimi,A.A.,“MathematicalModelforCompleteStress-Strain Curve Prediction of Normal, Lightweight, and High-Strength Concretes,” MagazineofConcreteResearch,V.56,No.1,2004,pp.23-34.
  • Tan,K.H.,Kong,F.K.,Teng,S.,and Weng,L.W.,“EffectofWeb Reinforcementon High-Strength Concrete Deep Beams,”ACIStructural Journal,V.94,No.5,1997,pp.572-582.
  • Sim,J.I.,Yang,K.H.,Lee,E.T.,andYi,S.T.,“EffectofAggregateand Specimen Sizeson LightweightConcreteFractureEnergy,”Materialsin CivilEngineering,ASCE,V.26,No.5,2014,pp.845-854.
  • Siao,W.B.,“Strut-and TieModelforShearBehaviorin Deep Beams and PileCapsFailing in DiagonalSplitting,”ACIStructuralJournal,V. 90,No.4,1993,pp.356-363.
  • Siao, W.B., “Shear Strength of Short Reinforced Concrete Walls, Corbels,and Deep Beams,”ACIStructuralJournal,V.91,No.2,1994, pp.123-132.
  • Shiu,K.N.,Daniel,J.I.,Aristizasbal-Ochoa,J.D.,Fiorato,A.E.,and Corley,W.G.,EarthquakeResistantStructuralWalls-TestsofWallsWith and Without Openings, Report to National Science Foundation, Construction Technology Laboratories, Portland Cement Association, Skokie,III.,1981,120pp.
  • SheikhS.A.,andKhoury,S.S.,“A Performance-BasedApproachforthe Design ofConfining Steelin Tied Columns,”ACIStructuralJournal,V. 94,No.4,1997,pp.421-431.
  • Sheikh,S.A.,and Khoury,S.S.,“Confined Concrete Columns with Stubs”,ACIStructuralJournal,V.90,No.4,1993,pp.414∼431.
  • Sheikh S.A.,and Shah, D.V.,and Khoury, S.S.,“Confinement of High-Strength ConcreteColumns,”ACIStructuralJournal,V.91,No.1, 1994,pp.100-111.
  • Sch fer, K., Strut-and-Tie Models for the Design of Structural Concrete,NotesofWorkshop,DepartmentofCivilEngineering,National ChengKungUniversity,Tainan,Taiwan,1996.
  • Sawyer,H.A.,“Design ofConcrete Frames forTwo Failure Stages,” Proceedings ofthe InternationalSymposium on FlexuralMechanics of ReinforcedConcrete,ASCE-ACI,MI,1964,pp.408-431.
  • Razvi,S.,and Saatcioglu,M.,“ConfinementModelforHigh-Strength Concrete,”JournalofStructuralEngineering,ASCE,V.125,No.3,1999, pp.281～289.
  • Pilakoutas, K., and Elnashai, A., “Cyclic Behavior of Reinforced ConcreteCantileverWalls,PartI:ExperimentalResults,”ACIStructural Journal,V.92,No.3,1995,pp.271-281.
  • Paulay,T.,and Uzumeri,S.M.,“A CriticalReview ofthe Seismic Design Provisions for Ductile Shear Walls for the Canadian Code,” CanadianJournalofCivilEngineering,V.2,No.4,1975,pp.592-601.
  • Paulay,T.,Priestley,M.J.N.,and Singe,A.J.,“Ductility in Earthquake Resisting Squat Shear walls,” ACI Journal,V.79,No.4,1982,pp. 257-269.
  • Paulay, T., and Priestley, M.J.N., “Stability of Ductile Structural Walls,”ACIStructuralJournal,V.90,No.4,1993,pp.385-392.
  • Paulay, T., and Priestley, M.J.N., Seismic Design of Reinforced Concrete and Masonry Buildings,John Wiley & Sons,Inc.,New York, 1992,768pp.
  • Park, R., “Evaluation of Ductility of Structures and Structural Assemblages from Laboratory Testing,” Bulletin ofthe New Zealand Natural.SocietyforEarthquakeEngineering,V.22,No.3,pp.155-166.
  • Park, R., and Paulay, T., Reinforced Concrete Structures, Wiley IntersciencePublication,New Jersey,USA,1975,769pp.
  • Panagiotakos,T.B.,and Fardis,M.N.,“Deformations of Reinforced ConcreteMembersatYielding andUltimate,”ACIStructuralJournal,V. 98,No.2,2001,pp.135-148.
  • Oesterle,R.G.,Fiorato,A.E.,Johal,L.S.,Carpenter,J.E.,Russell,H.G., and Corley, W.G., Earthquake Resistant Structural Walls-Tests of Isolated Walls, Report to National Science Foundation,Construction Technology Laboratories,Portland CementAssociation,Skokie,III.,1976, 315pp.
  • Oesterle,R.G.,Aristizasbal-Ochoa,J.D.,Fiorato,A.E.,Russell,H.G.,and Corley,W.G.,Earthquake ResistantStructuralWalls-Tests ofIsolated Walls-Phase II,Report to NationalScience Foundation,Construction Technology Laboratories,Portland CementAssociation,Skokie,III.,1979, 325pp.
  • Noguchi,T.,Tomosawa,F.,Nemati,K.M.,Chiaia,B.M.,and Fantilli, A.P., “A Practical Equation for Elastic Modulus of Concrete,” ACI StructuralJournal,V.106,No.5,2009,pp.690-696.
  • Matamoros,A.B.,and Wong,K.H.,“Design ofSimply Supported Deep BeamsUsingStrut-and-TieModels,”ACIStructuralJournal,V.100,No. 6,2003,pp.704-712.
  • Massone,L.M.,andWallace,J.W.,RC WallShear-FlexureInteraction: Analyticaland ExperimentalResponses,UCLA-SGEL-2009/2,Structural & Geotechnical Engineering Laboratory, Department of Civil & Environmental Engineering,University of California-Los Angeles,Los Angeles,CA,2009,311pp.
  • Massone,L.M.,Orakcal,K.,and Wallace,J.W.,“Deformation Capacity and Shear Strength of Reinforced Concrete Members under Cyclic Loading,”ACISpecialPublication236,2009,pp.127-150.
  • Maier,J.,ShearWallTests,ConcreteShearin Earthquake,University ofHouston,1992,pp.85-94.
  • Lefas, L.D., Kotsovos, M.D., and Ambraseys, N.N., “Behavior of Reinforced Concrete Structural Walls: Strength, Deformation Characteristics and Failure Mechanism,”ACIStructuralJournal,V.87, No.1,1990,pp.23-31.
  • Kotsovos,G.M., Kotsovos,M.D.,Cotsovos,D.M.,andKounadis,A.N., “SeismicBehaviourofRC Walls:an Attemptto ReduceReinforcement Congestion,” Magazine of Concrete Research,V.63,No.4,2011,pp. 235-246.
  • Kabeyasawa,T.andSomaki,T.,“ReinforcementDetailsforReinforced Concrete Shear Walls with Thick Panel,” Transactions ofthe Japan ConcreteInstitute,No.7,1985,pp.369-372.
  • Hwang,S.J.,and Lee,H.J.,“AnalyticalModelfor Predicting Shear Strengths of Interior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI StructuralJournal,V.97,No.1,2000,pp. 35-44.
  • Hwang,S.J.,and Lee,H.J.,“AnalyticalModelfor Predicting Shear Strengths of Exterior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI StructuralJournal,V.96,No.5,1999,pp. 846-857.
  • Hwang,S.J.,Fang,W.H.,Lee,H.J.,and Yu,H.W.,“AnalyticalModel for Predicting Shear Strength of Squat Walls,” JournalofStructural Engineering,ASCE,V.127,No.1,2001,pp.43-50.
  • Hsu,L.S.,and Hsu,C.-T.T.,“Complete Stress-Strain Behavior of High-Strength Concrete under Compression,” Magazine of Concrete Research,V.46,No.169,1994,pp.301-312.
  • Hofbeck,J.A.,Ibrahim,I.O.,and Mattock,A.H.,“Shear Transfer in ReinforcedConcrete,”ACIJournal,V.66,No.2,1969,pp.119-128.
  • Hirosawa,M.,Past Experimental Results on Reinforced Concrete Shear Walls and Analysis on them,Kenchiku Kenkyu Shiryo No.6, BuildingResearchInstitute,MinistryofConstruction,Japan,1975,277pp.
  • Gupta, A., and Vijaya Rangan, B., “High-strength Concrete(HSC) Structural Walls,” ACI Structural Journal, V. 95, No. 2, 1998, pp. 194-204.
  • Gulec,C.K.,andWhittaker,A.S.,andStojadinovic,B.,“ShearStrength ofSquatReinforced ConcreteWallswith Boundary FlangesorBarbells,” ACIStructuralJournal,V.106,No.3,2009,pp.368-377.
  • Gulec,C.K.,and Whittaker,A.S.,“EmpiricalEquationsforPeak Shear Strength of Low Aspect Ratio Reinforced Concrete Walls,” ACI StructuralJournal,V.108,No.1,2011,pp.80-89.
  • Greifenhagen,C.,and Lestuzzi.P.,“Static Cyclic Tests on Lightly ReinforcedConcreteShearWalls,”Engineering Structures,V.27,No.11, 2005,pp.1703-1712.
  • Farvashany, F.E., Foster, S.J., and Rangan, B.V., “Strength and Deformation of High-Strength Concrete Shearwalls,” ACI Structural Journal,V.105,No.1,2008,pp.21-29.
  • FEMA,FEMA 356: Prestandard and Commentary for the Seismic RehabilitationofBuildings,FEMA,WashingtohDC.,2000.
  • European StandardEN 1998-1:2004.,Eurocode8:DesignofStructures for Earthquake Resistance,British Standards Institution,London,UK, 2004.
  • Carreira,D.J.,and Chu,K.H.,“Stress-Strain Relationship for Plain ConcreteinCompression,”ACIJournal,V.82,No.6,1985,pp.797-804.
  • Cardenas,A.E., and Magura,D.D.,“Strength of High-Rise Shear Walls-RectangularCross Section,”ACISpecialPublication,V.36,1972, pp.119-150.
  • Budek,A.M.,Priestley,M.J.N.,and Lee,C.O.,“Seismic Design of ColumnsWith High-Strength Wireand Strand asSpiralReinforcement,” ACIStructuralJournal,V.99,No.5,2002,pp.660-670.
  • Bohl, A., and Adebar, P., “Plastic Hinge Lengths in High-Rise ConcreteShearWalls,”ACIStructuralJournal,V.108,No.2,2011,pp. 148-157.
  • Ba?ant,Z.P.,andPlanas,J.,Fracture and SizeEffectinConcreteand OtherQuasibrittleMaterials,CRC,New York,USA,1998.
  • ArchitecturalInstitiuteofJapan,Standard forStructuralCalculation of ReinforcedConcreteStructures,Chapter2,AIJ,1985,pp.8-11.
  • Ali,A.,and Wight,J.K.,“RC StructuralWalls with Staggered Door Openings,”JournalofStructuralEngineering,ASCE,V.117,No.5,1991, pp.1514-1531.
  • Adebar,P.,Ibrahim,A.M.M.,and Bryson,M.,“Testofa High-Rise Core Wall:Effective Stiffness for Seismic Analysis,” ACI Structural Journal,V.104,No.5,2007,pp.549-559.
  • ASTM,ASTM C 39/C39M:Standard TestMethod forCompressive Strength ofCylindricalConcrete Specimens,ASTM International,West Conshohocken,PA,2014,7pp.
  • ASTM,ASTM A 416/A416M:Standard SpecificationforSteelStrand, Uncoated Seven-Wire for Prestressed Concrete,ASTM International, WestConshohocken,PA,2012,5pp.
  • ASTM, ASTM C469/C469M: Standard Test Method for Static ModulusofElasticity and Poisson’sRatio ofConcrete in Compression, ASTM International,WestConshohocken,PA,2010,5pp.
  • ACICommittee 349,Code Requirements for Nuclear Safety-Related ConcreteStructures(ACI349-06),AmericanConcreteInstitute,2006,154 pp.
  • ACI Committee 363, “State-of-the-Art Report on High-Strength Concrete,”ACIJournal,V.81,No.4,1984,pp.364-411.
  • ACI Committee 318, Building Code Requirements for Structural Concrete(ACI 318-11) and Commentary, American Concrete Institute, FarmingtonHills,MI,2011,503pp.
  • ACI Committee 318, Building Code Requirements for Structural Concrete(ACI 318-11) and Commentary, American Concrete Institute, FarmingtonHills,MI,1999,391pp.
  • ACI Committee 318, Building Code Requirements for Structural Concrete(ACI 318-11) and Commentary, American Concrete Institute, FarmingtonHills,MI,1995,369pp.
  • ACI Committee 304, Heavyweight Concrete: Measuring, Mixing, Transporting,and Placing (ACI304.3R-96),AmericanConcreteInstitute, FarmingtonHills,MI,1996,8pp.