Z. Suo, E.Y. Ma, H. Gleskova, and S. Wagner, (1999) “Mechanics of rollableand foldable film-on-foil electronics”, Appl. Phys. Lett., 74, pp. 1177.
Z. Chen, B. Cotterell, W. Wang, (2002) “The fracture of brittle thin filmson compliant substrates in flexible displays”, Eng. Fract. Mech., 69 pp. 597.
Z. C. Wu, Z. H. Chen, X. Du, J. M. Logan, J. Sippel, M. Nikolou, K.Kamaras, J. R. Reynolds, D. B. Tanner, A. F. Hebrad, and A. G. Rinzler, (2004),“Transparent, Conductive Carbon Nanotube Films”, Science, 305, pp. 1273.
Y.S. Kim, S.-I. Oh, and S.-H. Choa, “Mechanical integrity of flexible In?Zn?Sn?O film for flexible transparent electrode”, Jpn. J. Appl. Phys. 52 (2013)05DA17.
Y.S. Jung, J.Y. Seo, D.W. Lee, and D.Y. Jeon, (2003) “Influence of DCmagnetron sputtering on the properties of amorphous indium zinc oxide thinfilm”, Thin Solid Films, 445, pp.63.
Y.-S. Park, H.-K. Kim, (2010) “Flexible indium zinc oxide/Ag/indium oxidemultilayer electrode grown on polyethersulfone substrate by cost-efficientroll-to-roll sputtering for flexible organic photovoltaics”, J. Vac. Sci. Technol. A,28, pp. 41.
Y.-C. Huang, F.-H. Hsu, H.-C. Cha, C.-M. Chuang, C.-S. Tsao, and C.-Y.Chen, (2013), “High-performance ITO-free spray-processed polymer solar cellswith incorporating ink-jet printed grid”, Org. Electron., 14, pp. 2809.
Y. Zhou, L. Hu, and G. Gruner, (2006), “A method of printing carbonnanotube thin films,”Appl. Phys. Lett. 88, 123109.
Y. S. Kim, W. J. Hwang, K. T. Eun, and S.-H. Choa, (2011)“Mechanicalreliability of transparent conducting IZTO film electrodes for flexible paneldisplays:, Appl. Surf. Sci. 257, pp. 8134.
Y. Ren, Y.Q. Fu, K. Liao, and H.M. Cheng, (2004), “Fatigue failuremechanisms of single-walled carbon nanotube ropes embedded in epoxy”, Appl.Phys. Lett., 84, pp. 2811.
Y. Leterrier, P. Bouten, X. Jiang, (2001), “Layer mechanics: Experimentalmethods and models”, IST-2001-34215, pp. 1-25.
Y. Leterrier, L. Medico, F. Demarco, J.-A.E. Manson, U. Betz, M.F. Escola,M.K. Olsson, F. Atamny, (2004), “Mechanical integrity of transparent conductiveoxide films for flexible polymer-based displays”, Thin Solid Films, 460, pp. 156.
X. Yu, R. Rajamani, K. A. Stelson, and T. Cui, (2008), “Fabrication ofcarbon nanotube based transparent conductive thin films using layer-by-layertechnology”, Surf. Coatings Technol. 202, pp. 2002.
W.N. Sharpe Jr, J. Pulskamp, D.S. Gianola, C. Eberl, R.G. Polcawich andR.J. Thompson, (2007), “Strain Measurements of Silicon Dioxide Microspecimensby Digital Imaging Processing”, Exp. Mech., 47, pp. 649.
W. Helfrich, W.G. Schneider, (1965), “Recombination radiation in anthracenecrystals”, Phys. Rev. Lett., 14, pp. 229.
T. Li, Z.Y. Huang, Z.C. Xi, S.P. Lacour, S. Wagner, and Z.Suo, (2005),“Delocalizing strain in a thin metal film on a poymer substrate”, Mech. Mater.,37, pp. 261.
T. Kamiya, K. Nomura and H. Hosono, (2010), “Present status of morphousIn?Ga?Zn?O thin-film transistors”, Sci. Technol. Adv. Mater. 11, pp. 044305.
T. H. Seo, T. S. Oh, S. J. Chae, A. H. Park, K. J. Lee, Y. H. Lee, and E. K.Suh, (2011), “Enhanced light output power of GaN light-emitting diodes withgraphene film as a transparent conducting electrod”, Jpn. J. Appl. Phys. 50, pp.125103.
T. Durkop, S.A. Getty, E. Cobas, M.S. Fuhrer, (2004), “Extraordinarymobility in semiconducting carbon nanotubes”, Nano Lett., 4, pp.35.
Stoney G.G., (1909), “The tension of metallic films deposited byelectrolysis”, Proc. R. Soc. London, Ser. A, 82, pp. 172-175.
Shashi Gupta, (2010), “Conductive Die Attach Film for Multiple ApplicationsPioneering Market Technology Expands”, Henkel Electronic Materials LLC,technical data.
Saito R, Dresselhaus G, Dresselhaus MS (1998), “Physical properties ofcarbon nanotubes”, Imperial College Press, London.
S.W. Heo, Y.D. Ko, Y.S. Kim, and D.K. Moon, (2013), “Enhancedperformance in polymer light emitting diodes using an indium-zinc-tin oxidetransparent anode by the controlling of oxygen partial pressure at roomtemperature”, J. Mater. Chem. C, 1, pp. 7009.
S.J. Kwak, J.H. Shim, H.K. Yoon, and K.H. Lee, (2003), “Inorganic thin filmcoating on the display plastic substrate”, Polymer Science and Technology, 14,pp. 181.
S.-I. Park, J.-H. Ahn, X. Feng, S. Wang, Y. Huang, J.A. Rogers, (2008),“Theoretical and Experimental Studies of Bending of Inorganic ElectronicMaterials on Plastic Substrates”, Adv. Funct. Mater. 18, pp. 2673.
S.-I. Na, S.-S. Kim, J. Jo, and D.-Y. Kim, (2008), “Efficient and flexibleITO-free organic solar cells using highly conductive polymer anodes”, Adv.Mater. 20, pp. 4061.
S.-H. Choa, C.-K. Cho, W.-J. Hwang, K.T. Eun, H.-K. Kim, (2011),“Mechanical integrity of flexible InZnO/Ag/InZnO multilayer electrodes grown bycontinuous roll-to-roll sputtering”, Sol. Energy Mater. Sol. Cells, 95, pp. 3442.
S. Tarasovs, J. Andersons, and Y. Letterier, (2010), “Estimation of interfacialfracture toughness based on progressive edge delamination of a thin transparentcoating on a polymer substrate”, Act. Mater., 58, pp. 2948.
S. S. Kim, J. H. Yim, X. Wang, D. D. C. Bradley, S. I. Lee, and J. C. deMello, (2010), “Spin- and spray-deposited single-walled carbon-nanotubeelectrodes for organic solar cells”, Adv. Funct. Mater. 20, pp. 2310.
S. Pei, J. Du, Y. Zeng, C. Liu, and H.-M. Cheng, (2009), “The fabrication ofa carbon nanotube transparent conductive film by electrophoretic deposition andhot-pressing transfer”, Nanotechnology 20, pp. 235707.
S. Jung, K.Lim, J.-W. Kang, J.-K. Kim, S.-I. Oh , K. Eun, D.-G. Kim, S.-H.Choa, (2014), “Electromechanical properties of indium?tin?oxide /poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) hybrid electrodes forflexible transparent electrodes”, Thin Solid Films, 550 pp. 435.
S. De, P. E. Lyons, S. Sorel, E. M. Doherty, P. J. King, W. J. Blau, P. N.Nirmalraj, J. J. Boland, V. Scardaci, J. Joimel, and J. N. Coleman, (2009),“Transparent, flexible, and highly conductive thin films based onpolymer-nanotube composites:, ACS Nano 3, pp. 714.
R.R. S ndergaard, M. Hosel, F.C. Krebs, (2013), “Roll-to-roll fabrication oflarge area functional organic materials”, J. Polym. Sci., Part B: Polym. Phys., 51,pp. 16.
R.F. Curl, and R. E. Smalley, (1988), “Probing C60”, Science, 242 pp. 1017?1022.
R. L. Hoffman, B. J. Norris, and J. F. Wager, (2003), “ZnO-basedtransparent thin-film transistors”, Appl. Phys. Lett., 82, pp. 733.
R. Gao, Z. Pan, and Z.L. Wang, (2001) “Work function at the tips ofmultiwalled carbon nanotubes”, Appl. Phys. Lett. 78 pp. 1757.
Park, J.-H., An J.-H., and Kim Y.-J., (2006), “Size effect on mechanicalproperties of SU-8”, The Korea Society of Mechanical Engineers SpringConference, Korea, pp. 1-6.
Paine D. C, H. Y. Yeom, and B. Yaglioglu (2005) Chapter 5: Transparentconducting oxide materials and technology. In: Grawford GP (ed) Flexible FlatPanel Displays. Wiley, England, pp 80?98.
P.F. Carcia, R.S. McLean, M.H. Reilly and G. Nunes, (2003), “TransparentZnO thin-film transistor fabricated by rf magnetron sputtering”, Appl. Phys.Lett., 82, pp. 1117.
P.C.P. Bouten, P.J. Slikkerveer, and Y. Leterrier, (2005), Chapter 5:Mechanics of ITO on plastic substrates for flexible display. In: Grawford GP (ed)Flexible Flat Panel Displays. Wiley, England, pp. 99?120.
N. Wan, J. Xu, G. Chen, X. gan, S. Guo, L. Xu, K. Chen, (2010),“Broadband anti-reflction and enhanced field emission from catalyst-free grownsmall-sezed ITO nanowries at a low temperature”, Act. Mater., 58, pp. 3068.
N. Wan, J. Wu, G.R. Chen, X. H. Gan, S.H. Guo, L. Xu, and K.J. Chen,(2010) “Broadband anti-reflection and enhanced field emission from catalyst-freegrown small-sized ITO nanowires at a low temperature”Acta Mater. 58, pp.3068.
M.S. Oh, W. Choi, K. Lee, D.K. Hwang and S. Im, (2008), “Flexible highgain complementary inverter using n-Zn O and p -pentacene channels onpolyethersulfone substrate”, Appl. Phys. Lett., 93, pp. 033510.
M.G. Faraj and K. Ibrahim, (2011), “Optical and structural properties ofthermally evaporated zinc oxide thin films on polyethylene terephthalatesubstrates”, Int. J. Polym. Sci., 2011, Article ID 302843.
M. W. Rowell, M. A. Topinka, M. D. McGehee, H.-J. Prall, G. Dennler, N. S.Sariciftci, L. Hu, and G. Gruner, (2006), “Organic solar cells with carbonnanotube network electrodes”, Appl. Phys. Lett. 88, pp. 233506.
M. Toshihiro , D. D. Edwards, T. O. Mason, G. B. Palmer, K. R.Poeppelmeier, J. L. Schindler, C. R. Kannewurf, and I. Nakabayashi, (1998),“Phase relationships and physical properties of homologous compounds in thezinc oxide-indium oxide system, J. Am. Ceram. Soc., 81, pp. 1310.
M. Pope, H.P. Kallmann, P. Magnante, (1963), “Electroluminescence inorganic crystals”, J. Chem. Phys. 38, pp. 2042.
Loctite 401 (2009), technical data, Henkel.
Li Y., Yu Z., Xue W., Xia F., (2008), “The study of SiO2, TiO2’s effect tothe anti-bending properties of flexible ITO films”, Opto Fiber Communicationand Optoelectronic Exposition and Conference 2008 (AOE 2008), Shanhai, China.
Lewis B. G. and Paine D. C. , (2010) “Applications and processing oftransparent conducting oxides”, MRS Bull., 25, pp. 22?27.
Letterier Y., Fischer C., Medico L., Demarco F., Manson J.-A.E., Bouten P.,DeGoede J., and Nairn J.A., (2003), “Mechanical properties of transparentfunctional thin films for flexible displays”, Bull. Soc. Vac. Coaters, 46th AnnualTechnical Conference Proceedings 2003, pp. 1-5.
L. Hu, J. Li, J. Liu, G. Gruner, and T. Marks, (2010), “Flexible organiclight-emitting diodes with transparent carbon nanotube electrodes: problems andsolutions”, Nanotechnology, 21, pp. 155202.
Ko Y. D. , and Kim Y. S. (2012), “Room temperature deposition of IZTOtransparent anode films for organic light-emitting diodes”, Materials ResearchBulletin 47 pp. 2800-2803.
Kato Y., Sekitani T., Takamiya M., Doi M., Asaka K., Sakurai T., Someya T.,(2007), “Sheet-type braille displays by integrating organic field-effect transistorsand polymeric actuators”, IEEE Trans. Electron. Devices, 54, pp. 202-209.
K. Roll, (1976), “Analysis of stress and strain distribution in thin films andsubstrates”, J. Appl. Phys., 47, pp. 3224.
K. Park, D.K. Lee, B.S. Kim, H. Jeon and N.E. Lee, (2010), “Stretchable,transparent zinc oxide thin film transistors”, Adv. Funct. Mater., 20, pp. 3577.
K. Naito, N. Yoshinaga, E. Tsutsumi, and Y. Akasaka, (2013), “Transparentconducting film composed of graphene and silver nanowire stacked layers”,Synth. Met. 175, pp. 42.
K. Lim, S. Jung, J.-K. Kim, J.-W. Kang, J.-H. Kim, S.-H. Choa, D.-G. Kim,(2013),“Flexible PEDOT: PSS/ITO hybrid transparent conducting electrode fororganic photovoltaics”, Sol. Energy. Mater. Sol. Cells, 115, pp. 71.
J.T. Han, J.S. Kim, H.D. Jeong, H.J. Jeong, S.Y. Jeong, and G.-W. Lee,(2010), “Modulating conductivity, environmental stability of transparentconducting nanotube films on flexible substrates by interfacial engineering”, ACSNano, 4, pp. 4551.
J.S. Ahn, and K.B. Lee, (2010), “High-performance semitransparenta-InGaZnO4 thin-film transistors using thin Al electrode”, J. Korean Phys. Soc.,57, pp. 1244.
J.P. Sun, Z.X. Zhang, S.M. Hou, Z.N. Gu, X.Y. Zhao, W.M. Liu, and Z.Q.Xue, (2004), “Work function of single-walled carbon nanotubes determined byfield emission microscopy”, Appl. Phys. A: Mater. Sci. Process 75 pp. 479.
J.M. Phillips, R.J. Cava, G.A. Thomas, S.A. Carter, J. Kwo, T. Siegrist, J.J.Krajewski, J.H. Marshall, W.F. Peck Jr., and D.H. Rapkine, (1995), “Zinc?indiumoxide:A high conductivity transparent conducting oxide”, Appl. Phys. Lett., 67,pp. 2246.
J.H. Chung, J.Y. Lee, H.S. Kim, N.W. Jang and J.H. Kim, (2008), “Effect ofthickness of ZnO active layer on ZnO-TFT's characteristics”, Thin Solid Films516 pp. 5597.
J.H. Burroughes, D.D.C. Bradley, A.R. Brown, R.N. Marks, K. Mackay, R.H.Friend, P.L. Burns, A.B. Holmes, (1990), “Light-emitting diodes based onconjugated polymers”, Nature, 347, pp. 539.
J.C.C. Fan, and J.B. Goodenough, (1977), “X?ray photoemission spectroscopystudies of Sn?doped indium?oxide films”, J. Appl. Phys., 48. pp. 3524.
J.-W. Lim, D.-Y. Cho, K. Eun, S.-H. Choa, S.-I. Na, J. Kim, and H.-K. Kim,(2012), “Mechanical integrity of flexible Ag nanowire network electrodes coatedon colorless PI substrates for flexible organic solar cells”, Sol. Ener. Mater. Sol.Cells, 105, pp. 69.
J.-W. Jiang, J.-S. Wang, and B. Li, (2009), “Thermal expansion insingle-walled carbon nanotubes and graphene: Nonequilibrium green’s functionapproach”, Phys. Rev. B, 80, pp. 205429.
J.-H. Ahn, H.-S. Kim, K. Lee, S. Jeon, S. Kang, Y. Sun, R. Nuzzo and J.Rogers, (2006), “Heterogeneous three-dimensional electronics by use of printedsemiconductor nanomaterials”, Science, 314, pp. 1754.
J.-D. Yang, I.-W. Ok, J.-M. Cho, D.-H. Park, W.-S. Shin, K.-G. Kim, S.-J.Moon, K.-H. Yoo, and W.-K. Choi, (2012), “Ag interlayered transparentconducting electrode for photovoltaic cells”, Jpn. J. Appl. Phys. 51, pp. 10NE07.
J. W. Jo, J. W. Jung, J. U. Lee, and W. H. Jo, (2010), “Fabrication ofhighly conductive and transparent thin films from single-walled carbon nanotubesusing a new non-ionic surfactant via spin coating”, ACS Nano 4, pp. 5382.
J. Park, J. Lee, and Y.-Y. Noh, (2012), “Optical and thermal properties oflarge-area OLED lightings with metallic grids”, Org. Electron. 13, pp. 184.
J. Lewis, S. Grego, B. Chalamala, E. Vick, and D. Temple, (2004), “Highlyflexible transparent electrodes for organic light-emitting diode-based displays”,Appl. Phys. Lett., 85, pp. 3450.
J. L. Elechiguerra, L. Larios-Lopez, C. Liu, D. Garcia-Gutierrez, A.Camacho-Bragado, and M. J. Yacaman, (2005), “Corrosion at the nanoscale:The case of silver nanowires and nanoparticles”, Chem. Mater. 17, pp. 6042.
J. Di, D. Hu, H. Chen, Z. Yong, M. Chen, Z. Feng, Y. Zhu, and Q. Li,(2012), “Ultrastrong, foldable, and highly conductive carbon nanotube film”,ACS Nano 6, pp. 5457.
I. Ozen, M. A. Gulgun and M. Ozcan, (2004), “Self-induced crystallinity inRF magnetron sputtered ZnO thin films”, Key Eng. Mater., 264, pp. 1225.
Hildner M.L. (2005) Chapter 15: OLED displays on plastic. In: Grawford GP(ed) Flexible Flat Panel Displays. Wiley, England, pp. 285?312.
H. Wu, D. Kong, Z. Ruan, P.-C. Hsu, S.Wang, Z. Yu, T. J. Carney, L. Hu, S.Fan, and Y. Cui, (2013), “A transparent electrode based on a metal nanotroughnetwork”, Nat. Nanotechnol. 8, pp. 421.
H. Okimoto, T. Takenobu, K. Yanagi, Y. Miyata, H. Kataura, T. Asano, and Y.Iwasa, (2009), “Ink-jet printing of a single-walled carbon nanotube thin filmtransistor”, Jpn. J. Appl. Phys. 48, 06FF03.
H. Hosono, (2006), “Ionic amorphous oxide semiconductors: Material design,carrier transport, and device application”, J. Non-Cryst. Solids, 352, pp. 851.
Ginley D. S. and Bright C., (2010) “Transparent conducting oxides”, MRSBull., 25, pp.15-18.
G.S. Choi, Y.S. Cho, K.H. Son, and D.J. Kim, (2006), “Mass production ofcarbon nanotubes using spin-coating of nanoparticle”, Microelectron. Eng. 66,pp. 77.
G. Haccke, (1976), “New figure of merit for transparent conductors”, J.Appl. Phys., 47, pp. 4806.
G. Gustafsson, Y. Cao, G.M. Treacy, F. Klavetter, N. Colaneri, A.J. Heeger,(1992), “Flexible lightemitting diodes made from soluble conducting polymers”,Nature, 357, pp. 477.
G. Guisbiers, E. Herth, and L. Buchaillot, (2011) “Mechanicalcharacterization of aluminium nanofilms”, Microelectron. Eng., 88, pp. 844.
G. Gruner, (2006), “Carbon nanotube films for transparent and plasticelectronics”, J. Mater. Chem. 16, pp. 3533.
F. Greco, A. Zucca, S. Taccola, A. Menciassi, T. Fujie, H. Haniuda, S.Takeoka, P. Dario, and V. Mattoli, (2011) “Ultra-thin conductive free-standingPEDOT/PSS nanofilms”, Soft Matter, 7, pp. 10642.
E.M.C. Fortunato, P.M.C. Barquinha, A.C.M.B.G. Pimentel, A.M.F. Goncalves,A.J.S. Marques, R.F.P. Martins and L.M.N. Pereira, (2004), “Wide-bandgaphigh-mobility ZnO thin-film transistors produced at room temperature”, Appl.Phys. Lett. 85 pp. 2541.
E.-H. Kim, C.-W. Yang, and J.-W. Park, (2011), “The crystallinity andmechanical properties of indium tin oxide coatings on polymer substrates”, J.Appl. Phys., 109, pp. 043511.
Dresselhaus M.S., Dresselhaus G., Avouris P. (2001) “Carbon nanotubes:Advanced Topics in the synthesis, structure, properties, andapplications”Springer, 80, Berlin.
D.-S. Leem, A. Edwards, M. Faist, J. Nelson, D. D. C. Bradley, and J. C. deMello, (2011), “Efficient organic solar cells with solution-processed silvernanowire electrodes”, Adv. Mater. 23, pp. 4371.
D.-H. Kim, J.-H. Ahn, W. M. Choi, H.-S. Kim, T.-H. Kim, J. Song, Y. Y.Huang, Z. Liu, C. Lu and J. A. Rogers, (2008), “Stretchable and foldable siliconintegrated circuits”, Science, 320, pp. 507.
D. R. Cairns, R. P. Witte, D. K. Sparacin, S. Sachsman, D. C. Paine, and G.P. Crawford, (2000) “Strain-dependent electrical resistance of tin-doped indiumoxide on polymer substrate”, Appl. Phys. Lett., 76, pp. 1425.
D. Braun, A.J. Heeger, (1991), “Visible-light emission from semiconductingpolymer diodes”, Appl. Phys. Lett., 58, pp. 1982.
Cherenack K.H., Munzenrieder N.S. and Troster G., (2010), “Impact ofmechanical bending on ZnO and IGZO thin-film transistors”, IEEE ElectronDevice Lett., 31, pp. 1254-1256.
Che F.X.., Lim S.P.S., Chai T.C.., and Zhang X., (2012), “Structure designoptimization and reliability analysis on a pyramidal-shape three-die-stackedpackage with through-silicon via”, IEEE Trans. Device Mater. Reliab., 12. pp.201-208.
C.W. Ong, D.G. Zong, M. Aravind, C.L. Choy and D.R. Lu, (2003), “Tensilestrength of zinc oxide films measured by a microbridge method”, J. Mater. Res.,18, pp. 2464.
C.S. Li, Y.N. Li, Y.L. Wu, B.S. Ong and R.O. Loutfy, (2008), “Performanceimprovement for solution-processed high-mobility ZnO thin-film transistors”, J.Phys. D: Appl. Phys., 41, pp. 125102.
C.-H. Liu and X. Yu, (2011), “Silver nanowire-based transparent, flexible,and conductive thin film”, Nanoscale Res. Lett. 6, pp. 75.
C. M. Trottier, P. Glatkowski, P. Wallis, and J. Luo, (2005), “Properties andcharacterization of carbon-nanotube-based transparent conductive coating”, J.Soc. Inf. Disp. 13, pp. 759.
Baedeker K. (1907) “Uber die elektrische Leitfahigkeit und diethermoelektrische Kraft einiger Schwermetallverbindungen”. Ann. Phys. 22, pp.749.
B. Zhang, F. Li, Z. Lin, C. Wu, T. Guo, W. Liu, Y. Su, and J. Du, (2012),“Flexible White Organic Light-Emitting Diodes Based on Single-Walled CarbonNanotube:Poly(3,4-ethylenedioxythiophene)/Poly(styrene sulfonate) TransparentConducting Film”, Jpn. J. Appl. Phys. 51, pp. 070204.
B. Dan, G. C. Irvin, and M. Pasquali, (2009), “Continuous and scalablefabrication of transparent conducting carbon nanotube films”, ACS Nano, 3, pp.835.
Au. K.Y., Beleran J.D., Zhang, Y.F., Kriangsak S.L., Wilson P.L.O., DrakeY.S.K, and Nathapong S., (2011), “Multi chip stacking & reliability challengesusing TSV-micro C4 solder interconnection for FCCSP TSV package”, 2011 13thElectronics Packaging Technology Conference (EPTC), Singapore, pp. 608-619.
A. Zahab, L. Spina, P. Poncharal, and C. Marliere, (2000), “Water-vaporeffect on the electrical conductivity of a single-walled carbon nanotube mat”,Phys. Rev. B, 62, pp. 10000.
A. Schindler, J. Brill, N. Fruehauf, J. P. Novak, and Z. Yaniv, (2007),“Solution-deposited carbon nanotube layers for flexible display applications”,Phys. E, 37, pp. 119.
?[1] W.A. MacDonald, (2004) “Engineered films for display technology”, J. Mater.Chem., 14, pp. 4.
'
유연기판에 제작된 유연소자 및 박막의 기계적 특성에 관한 연구 = Mechanical integrity of flexible devices and thin films on flexible substrate'
의 유사주제(
) 논문