연구동향 분석
박사

Unified Theory for Shear Capacity of Concrete Members: Dual Potential Capacity Model

이득행 2015년

논문상세정보
인용/피인용
' Unified Theory for Shear Capacity of Concrete Members: Dual Potential Capacity Model' 의 주제별 논문영향력
논문영향력 선정 방법
논문영향력 요약
주제
  • aggregate interlocking
  • bond
  • crack
  • dual potential capacity
  • post-tension
  • prestressed
  • psc
  • rc
  • reinforced
  • sfrc
  • shear
  • shear demand
  • simplified model
  • size effect
  • steel fiber
  • unbonded tendon
동일주제 총논문수 논문피인용 총횟수 주제별 논문영향력의 평균
424 0

0.0%

' Unified Theory for Shear Capacity of Concrete Members: Dual Potential Capacity Model' 의 참고문헌

  • fib: Model Code 2010, final draft. Bulletin Nos. 65 and 66.
  • Zwoyer, E. M., “Shear Strength of Simply-Supported Prestressed Concrete Beams,” Structural Research Series No. 53, University of Illinois. 1953.
  • Zakaria, M., Ueda, T., Wu, Z., and Meng, L., “Experimental Investigation on Shear Cracking Behavior in Reinforced Concrete Beams with Shear Reinforcement,” Journal of Advanced Concrete Technology, Vol. 7, No. 1, 2009, pp. 79-96.
  • Xie, L., Bentz, E. C., and Collins, M. P., “Influence of Aixal Stress on Shear Response of Reinforced Concrete Elements,” ACI Structural Journal, Vol. 108, No. 6, 2011, pp. 745-754.
  • Wei, W. W., Gong, J. X., and Che, Y., “Shear Strength Model for Reinforced Concrete Beams with Web Reinforcement,” Magazine of Concrete Research, Vol. 63, No. 6, pp. 423-431.
  • Walraven, J. C. “Fundamental Analysis of Aggregate Interlock,” Journal of Structural Engineering, ASCE, Vol. 107, No. 7, pp. 2245-2270.
  • Walraven, J. C. and Mercx, W. P. M., “The Bearing Capacity of Prestressed Hollow-Core Slabs,” Heron, Vol. 28, No. 3, 1983, pp. 1-46.
  • Wafa, F. F., and Ashour, S. A., “Mechanical properties of High-Strength Fiber Reinforced Concrete,” ACI Materials Journal, Vol. 89, No. 5, 1992, pp. 449~455. 109. Song, P. S. and Hwang, S., “Mechanical Properties of High-Strength Steel Fiber-Reinforced Concrete,” Construction and Building Materials, Vol. 18, No. 9, 2004, pp. 669~673.
  • Voyiadjis, G. Z. and Abulebdah, T. M., “Biaxial Testing of Repaired Concrete,” ACI Material Journal, Vol. 89, No. 6, 1992, pp. 564-572.
  • Voo, J. Y. L., and Foster, S. J., “Variable Engagement Model for the Design of Fibre Reinforced Concrete Structures,” Advanced Materials for Construction of Bridges, Buildings, and Other Structures III, Vol. 5, 2003, pp. 1-10.
  • Voo, J. Y. L., and Foster, S. J., “Variable Engagement Model for Fibre Reinforced Concrete in Tension,” UNICIV Report No. R-420, University of New South Wales, Sydney, Australia, 2003, pp. 1-86.
  • Vecchio, F. J., “Disturbed Stress Field Model for Reinforced Concrete: Formulation,” Journal of Structural Engineering, ASCE, Vol. 126, No. 9, 2000, pp. 1070-1077.
  • Vecchio, F. J. and Collins, M. P., “Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Journal, Proceedings Vol. 83, No. 2, 1986, pp. 219-231.
  • Vecchio, F J., Gauvreau, P., and Liu, Karen, “Modeling of Unbonded Post- Tensioned Concrete Beams Critical in Shear,” ACI Structural Journal, Vol. 103, No. 1, 2006, pp. 57-64.
  • Vas Rodrigues, R., Shear Strength of Reinforced Concrete Bridge Deck Slabs, Ph.D. thesis, cole Polytechnique F d rale de Lausanne (EPFL), Lausanne, Switzerland, Thesis No. 3739, 293 pp.
  • Vas Rodrigues, R. V., Muttoni, A., and Fern ndez Ruiz, M., “Influence of Shear on Rotation Capacity of Reinforced Concrete Members Without Shear Reinforcement,” ACI Structural Journal, Vol. 107, No. 5, 2010, pp. 516-525.
  • Tureyen, A. K., Wolf, T. S., and Frosch, R. J., “Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement,” ACI Structural Journal, Vol. 103, No. 5, 2006, pp. 656-663.
  • Trueyen, A. K. and Frosch, R. J., “Concrete Shear Strength: Another Perspective,” ACI Structural Journal, Vol. 100, No. 5, 2003, pp. 609-615.
  • Tasuji, M. E.; Slate, F. O.; and Nilson, A. H., “Stress-Strain Response and Fracture of Concrete in Biaxial Loading,” ACI Journal, Proceedings Vol. 75, No. 7, 1978, pp. 306-312.
  • Tan, K. H., and Mansur, M. A., “Shear Transfer in Reinforced Fiber Concrete,” Journal of Materials in Civil Engineering, ASCE, Vol. 2, No. 4, 1990, pp. 202- 214.
  • Tan, K. H., Teng, S., Kong, F. K., and Lu, H. Y., “Main Tension Steel in High- Strength Concrete Deep and Short Beams,” ACI Structural Journal, Vol. 94, No. 6, 1997, pp. 752-764.
  • Tan, K. H., Murugappan, K., and Paramasivam, P., “Shear Behavior of Steel Fiber Reinforced Concrete Beams,” ACI Structural Journal, Vol. 89, No. 6, 1992, pp. 3-11.
  • Swamy, R. N., Bandyopadhyay, A. K., and Erikitola, M. K., “Influence of Flange Width on the Shear Behaviour of Reinforced Concrete T Beams,” Proceedings of the Institution of Civil Engineers, Vol. 55, 1973, pp. 167-190.
  • Susetyo, J., Gauvreau, P., and Vecchio, F. J., “Effectiveness of Steel Fiber as Minimum Shear Reinforcement,” ACI Structural Journal, Vol. 108, No. 4, 2011, pp. 488-496.
  • Sun, S., Kuchma, D. A., and Kim, K. S., “Analysis of Photo-Graphically Measured Crack Development from Shear Test on Large Bridge Girder,” PCI Journal, Vol. 39, No. 3, 2009, pp. 2-19.
  • Sozen, M. A., Zwoyer, E. M., Siess. C. P., “Investigation of Prestressed Concrete for Highway Bridge, Part I ? Strength in Shear of Beams without Web Reinforcement,” Engineering Experiment Station, Bulletin No. 452, University of Illinois at Urbana-Champaign, 1959.
  • Soroushian, P. and Lee, C. D., “Distribution and Orientation of Fibers in Steel Fiber Reinforced Concrete,” ACI Materials Journal, Vol. 87, No. 5, 1988, pp. 433-439.
  • Sneed, L. H. and Ramirez, J. A., “Influence of Effective Depth on Shear Strength of Concrete Beams?Experimental Study,” ACI Structural Journal, Vol. 107, No. 5, 2010, pp. 554-562.
  • Shoaib, A., Lubell, A. S., Bindiganavile, V. S., “Size Effect in Shear for Steel Fiber-Reinforced Concrete Members without Stirrups,” ACI Structural Journal, Vol. 111, No. 5, 2014, pp. 1081-1090.
  • Shioya, T., “Shear Properties of Large Reinforced Concrete Members,” Special Report, Institute of Technology, Shimizu Corp., No. 25, Feb. 1989, 198 pp. (in Japanese)
  • Sherwood, E. G., One-Way Shear Behaviour of Large, Lightly Reinforced Concrete Beams and Slabs, Ph.D. thesis, Department of Civil Engineering, University of Toronto, 2008, 332 pp.
  • Sherwood, E. G., Bentz, E. C., and Collins, M. P., “Effect of Aggregate Size on Beam-Shear Strength of Thick Slabs,” ACI Structural Journal, Vol. 104, No. 2, 2007, pp. 180-191.
  • Sharma, A. K., “Shear Strength of Steel Fiber Reinforced Concrete Beams,” ACI Journal, Proceedings Vol. 83, No. 4, 1986, pp. 624-628.
  • S rensen, H. C., “Shear tests on 12 reinforced concrete T-beams”, Report R60, Structural research Laboratory, Technical University of Denmark, 1974.
  • Romualdi, J. P., and Mandel, J. A., “Tensile Strength of Concrete Affected by Uniformly Distributed and Closely Spaced Short Lengths of Wire Reinforcement,” ACI Journal, Proceedings Vol. 61, No. 6, 1964, pp. 657-671.
  • Reineck, K. H., “Ultimate Shear Force of Structural Concrete Members without Transverse Reinforcement Derived from Mechanical Model,” ACI Structural Journal, Vol. 88, No. 5, 1991, pp. 592-602.
  • Reineck, K. H., Kuchma, D. A, Kim, K. S., and Marx, S., “Shear Database for Reinforced Concrete Members without Shear Reinforcement,” ACI Structural Journal, Vol. 100, No. 2, 2003, pp. 240-249.
  • Rangan, B. V., “Web Crushing Strength of Reinforced and Prestressed Concrete Beams,” ACI Structural Journal, Vol. 88, No. 1, 1991, pp. 12-16.
  • Park, H. G., Choi, K. K., and Wight, J. K., “Strain-Based Shear Strength Model for Slender Beams without Web Reinforcement,” ACI Structural Journal, Vol. 103, No. 6, 2006, pp. 783-793.
  • Park, H. G., Choi, K. K., and Chung, L., “Strain-Based Strength Model for Direct Punching Shear of Interior Slab?Column Connections,” Engineering Structures, Vol. 33, No. 3, 2011, pp. 1062-1073.
  • Pang, X. B. and Hsu, T. T. C., “Fixed Angle Softened Truss Model for Reinforced Concrete,” ACI Structural Journal, Vol. 93, No. 2, 1996, pp. 197-207.
  • Pan, Z. and Li, B., “Evaluation of Shear Strength Design Methodologies for Slender Shear-Critical RC Beams,” Journal of Structural Engineering, ASCE, Vol. 139, No. 4, 2013, pp. 619-622.
  • Olesen, S. E., Sozen, M. A., and Siess, C. P., “Investigation of Prestressed Reinforced Concrete for Highway Bridges, Part IV: Strength in Shear of Beams with Web Reinforcement,” Engineering Experiment Station, Bulletin No.493, University of Illinois at Urbana-Champaign, 1967, 152 pp.
  • Narayanan, R., and Darwish, I. Y. S., “Use of Steel Fibers as Shear Reinforcement,” ACI Structural Journal, Vol. 84, No. 3, 1987, pp. 216-227.
  • Naaman, A. E., Namur, G. G., Alwan, J. M., and Najm, H. S., “Fiber Pullout and Bond Slip. Ⅰ: Analytical Study,” Journal of Structural Engineering, ASCE, Vol. 117, No. 9, 1991, pp. 2769-2790.
  • Muttoni, A. and Fern ndez Ruiz, M., “Shear Strength of Members without Transverse Reinforcement as a Function of the Critical Shear Crack Width,” ACI Structural Journal, Vol. 105, No. 2, 2008, pp. 163-172.
  • Mphonde, A.G. and Frantz, G.C., “Shear Tests of High- and Low-Strength Concrete Beams with Stirrups,” ACI Special Publication, SP-87, Sept. 1985, pp. 179-196.
  • Moayer, M., and Regan, P. E., “Shear Strength of Prestressed and Reinforced Concrete T-Beams,” ACI SP 42-8, Detroit, American Concrete Institute, 1974, pp. 183-213.
  • Mihaylov, B. I., Bentz, E. C., and Collins, M. P., “Two-Parameter Kinematic Theory for Shear Behavior of Deep Beams,” ACI Structural Journal, Vol. 110, No. 3, 2013, pp. 447-455.
  • Maya, L. F., Fernandez Ruiz, M., Muttoni, A., and Foster, S. J., “Punching Shear Strength of Steel Fiber Reinforced Concrete Slabs,” Engineering Structures, Vol. 40, No. 1, 2012, pp. 83-94.
  • Mansur, M. A., Ong, K. C. G., and Paramsivam, P., “Shear Strength of Fibrous Concrete Beams without Stirrups,” Journal of Structural Engineering, ASCE Vol.112, No.9, 1986, pp.2066-2079.
  • Mahgoub, M. O., “Shear Strength of Prestressed Concrete Beams without Web Reinforcement,” Magazine of Concrete Research, Vol.27, No.93, 1975, pp. 219- 228.
  • MacGregor, J. G., Strength and Behavior of Prestressed Concrete Beams with Web Reinforcement, Doctorate Thesis, University of Illinois, 1960, 295 pp.
  • Maaddawy, T. E., Soudki, K., and Topper, T., “Analytical Model to Predict Nonlinear Flexural Behavior of Corroded Reinforced Concrete Beams,” ACI Structural Journal, Vol. 102, No. 4, 2005, pp. 550-559.
  • Lyngberg, B. S., “Ultimate Shear Resistance of Partially Prestressed Reinforced Concrete I-Beams,” ACI Journal, Proceedings Vol. 73, No. 4, 1976, pp. 214-222.
  • Lim, T. Y., Paramsivam, P., and Lee, S. L., “Shear and Moment Capacity of Reinforced Steel-Fiber Concrete Beams,” Magazine of Concrete Research, Vol.39, No.140, 1987, pp.148-160.
  • Li, V., Ward, R., and Hamza, A. M., “Steel and Synthetic Fibers as Shear Reinforcement,” ACI Materials Journal, Vol. 89, No. 5, 1992, pp. 499-508.
  • Leonhardt, F. and Walther, R., “The Stuttgart Shear Tests 1961,” Beton und Stahlbetonbau, Vol. 56, No. 12, 1961, and V. 57, No. 2, 3, 6, 7, and 8, 1962, Cement and Concrete Association Library Translation No. 111, Wexham Springs, UK, 1964, 134 pp.
  • Lee, S. C., Cho, J. Y., and Vecchio, F. J., “Diverse Embedment Model for Steel-Fiber-Reinforced Concrete in Tension: Model Development,” ACI Structural Journal, Vol. 108, No. 5, 2011, pp. 516-525.
  • Lee, J. Y., Kim, S. W., and Mansur, M. Y., “Nonlinear Analysis of Shear- Critical Reinforced Concrete Beams Using Fixed Angle Theory,” Journal of Structural Engineering, ASCE, Vol. 137, No. 10, 2011, pp. 1017-1029. 32. Park, R. and Paulay, T., Reinforced Concrete Structures, John Wiley and Sons, New York, 1975, 800 pp.
  • Lee, D. H., Park, M. K., Oh, J. Y., Kim, K. S., Im, J. H., and Seo, S. Y., “Web- Shear Capacity of Prestressed Hollow-Core Slab Unit with Consideration on the Minimum Shear Reinforcement Requirement,”Computers and Concrete, Vol 14, No. 3, 2014, pp. 211-231.
  • Lee, D. H., Hwang, J. H., Ju, H., and Kim, K. S., “Application of Direct Tension Force Transfer Model with Modified Fixed-Angle Softened-Truss Model to Finite Element Analysis of Steel Fiber-Reinforced Concrete Members Subjected to Shear,” Computers and Concrete, Vol. 13, No. 1, 2013, pp. 49-70.
  • Lee, D. H., Hwang, J. H., Ju, H., Kim, K. S., and Kuchma, D. A., “Nonlinear Finite Element Analysis of Steel Fiber Reinforced Concrete Members Using Direct Tension Force Transfer Model,” Finite Elements in Analysis and Design, Vol. 50, 2012, pp. 266-286.
  • Lee, D. H. and Kim, K. S., “Flexural Strength of Prestressed Concrete Members with Unbonded Tendons,” Structural Engineering and Mechanics, Vol. 38, No. 5, 2011, pp. 675-696.
  • Kwak, Y. K., Eberhard, M. O. Kim, W. S., and Kim, J., “Shear Strength of Steel Fiber Reinforced Concrete Beams without Stirrups,” ACI Structural Journal, Vol. 99, No. 4, 2002, pp. 530-538.
  • Kupfer, H.; Hilsdorf, H. K.; and R sch, H., “Behavior of Concrete under Biaxial Stresses,” ACI Journal, Proceedings Vol. 66, No. 8, 1969, pp. 656-666.
  • Kupfer, H. and Baumann, T., “Staffelung der Biegezugbewehrung bei hohen Schubspannungen in Schlanken Stahlbetont gern mit I-Querschnitt,” Beton-und Stahlbetonbau, Vol. 64, 1969, pp. 278-283.
  • Kuchma, D., Kim, K. S., Nagle, T. J., Sun, S., and Hawkins, N. M., “Shear Tests on High-Strength Prestressed Bulb-Tee Girders: Strengths and Key Observations,” ACI Structural Journal, Vol. 105, No. 3, 2008, pp. 358-367.
  • Kuchma, D., Hawkins, N. M., Kim, S., Sun, S., and Kim, K. S., “Simplified shear provisions of the AASHTO LRFD Bridge Design Specifications,” PCI Journal, Vol. 38, No. 3, 2008, pp. 53-73.
  • Krefeld, W.J. and Thurston, C.W., “Studies of the Shear and Diagonal Tension Strength of Simply Supported Reinforced Concrete Beams,” ACI Journal, Proceedings, Vol. 63, No. 4, 1966, pp. 451-476
  • Kotsovos, M. D., “Compressive Force Path Concept: Basis for Reinforced Concrete Ultimate Limit State Design,” ACI Structural Journal, Vol. 85, No. 1, 1998, pp. 68-75.
  • Korea Concrete Institute, KCI Design Specifications for Concrete Structures, 2012, 599 pp.
  • Kordina, K., Hegger, J., and Teutsch, M., “Shear Strength of Prestressed Concrete Beams with Unbonded Tendons,” ACI Structural Journal, Vol. 82, No. 2, 1989, pp. 143-149.
  • Kim, W. and White, R. N., “Initiation of Shear Cracking in Reinforced Concrete Beams with No Web Reinforcement,” ACI Structural Journal, Vol. 88, No. 3, 1991, pp. 301-308.
  • Kim, W. and Jeong, J. P., “Decoupling of Arch Action in Shear-Critical Reinforced Concrete Beams,” ACI Structural Journal, Vol. 108, No. 4, 2011, pp. 395-404.
  • Kim, K. S., Shear behavior of reinforced concrete beams and prestressed concrete beams, Ph.D. dissertation. Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 2004.
  • Kim, K. S., Lee, D. H., Hwang, J. H., and Kuchma, D. A., “Shear Behavior Model for Steel Fiber-Reinforced Concrete Members without Transverse Reinforcements,” Composites Part B: Engineering, Vol. 43, No. 5, 2012, pp. 2324-2334.
  • Kim, K. S. and Lee, D. H., "Nonlinear Analysis Method for Continuous Post- Tensioned Concrete Members with Unbonded Tendons," Engineering Structures, Vol. 40, No, 1, 2012, pp. 487-500.
  • Kim, J. K. and Park. Y. D., “Shear Strength of Reinforced High Strength Concrete Beams without Web Reinforcement,” Magazine of Concrete Research, Vol. 46, No. 166, 1994, pp. 7-16.
  • Kaufman, M. K., and Ramirez, J. A., “Re-evaluation of the ultimate shear behavior of high-strength concrete prestressed I-beams,” ACI Structural Journal, Vol. 85, No. 3, 1988, pp.295-303.
  • Karl, K. W., Lee, D. H., Hwang, J. H., Kim, K. S., and Choi, I. S., “Revision on Material Strength of Steel Fiber-Reinforced Concrete,” International Journal of Concrete Structures and Materials, Vol. 5, No. 2, 2011, pp. 87-96.
  • Karl, K. W., Kim, K. S., Lee, D. H., Hwang, J. H., Ju, H. J., and Seo, S. Y., “An experimental Study on Shear Strength of High-Strength Reinforced Concrete Beams with Steel Fibers,” Journal of the Architectural Institute of Korea, Vol. 27, No. 10, 2010, pp. 19-28. (In Korean)
  • Kar, J. N., “Shear Strength of Prestressed Beams without Web Reinforcement,” Magazine of Concrete Research, Vol. 21, No. 68, 1969, pp. 159-170.
  • Kani, G. N. J., “The Riddle of Shear Failure and Its Solution,” ACI Journal, Proceedings Vol. 61, No. 4, 1964, pp. 441-467.
  • Kani, G. N. J., “How Safe Are Our Large Reinforced Concrete Beams,” ACI Journal, Proceedings, Vol. 64, No. 3, 1967, pp. 128-141.
  • Ju, H., Lee, D. H., Hwang, J. H., Kim, K. S., and Oh, Y. H., “Fixed-Angle Smeared-Truss Approach with Direct Tension Force Transfer Model for Torsional Behavior of Steel Fiber-Reinforced Concrete Members,” Advanced Concrete Technology, Vol. 11, 2013, pp. 215-229.
  • Ju, H., Lee, D. H., Hwang, J. H., Kang, J. W., Kim, K. S., and Oh, Y. H., “Torsional Behavior Model of Steel Fiber-Reinforced Concrete Members Modifying Fixed-Angle Softened-Truss Model,” Composites Part B: Engineering, Vol. 45, No. 1, 2013, pp. 215-231.
  • Joint ACI-ASCE Committee 445, “Recent Approaches to Shear Design of Structural Concrete. State-of-the-Art Report by ASCE-ACI Committee 445 on Shear and Torsion,” Journal of Structural Engineering, ASCE, Vol. 124, No. 12, 1998, pp. 1375-1417.
  • Janaka Perera, S. V. T. and Mutsuyoshi, H., “Shear Behavior of Reinforced High-Strength Concrete Beams,” ACI Structural Journal, Vol. 110, No. 1, 2013, pp. 43-52.
  • Islam, M. S., Pam, H. J., and Kwan, A. K. H., “Shear Capacity of High-Strength Concrete Beams with Their Point of Inflection within The Shear Span,” Proceedings of Institute of Civil Engineering - Structures & Buildings, Vol.128, 1998, pp. 91-99.
  • Hwang, J. H., Lee, D. H., Kim, K. S., Ju, H. and Seo, S. Y., “Evaluation of Shear Performance of Steel Fiber-Reinforced Concrete Beams Using a Modified Smeared-Truss Model,” Magazine of Concrete Research, Vol. 65, No. 5, 2013, pp. 283?296.
  • Hwang, J. H., Lee, D. H., Ju, H. J., Kim, K. S. Seo, S. Y., and Kang, J. W., “Shear Behavior Models of Steel Fiber-Reinforced Concrete Beams Modifying Softened Truss Model Approaches,” Materials, Special Publication: Constitutive model on composite materials, Vol. 6, No. 10, 2013, pp. 4847-4867.
  • Hsu, T. T. C. and Zhu, R. R. H., “Softened Membrane Model for Reinforced Concrete Elements in Shear,” ACI Structural Journal, Vol. 99, No. 4, 2002, pp. 460-469.
  • Hanson, J.W., “Tensile Strength and Diagonal Tension Resistance of Structural Lightweight Concrete,” ACI Journal, Proceedings Vol. 58, No. 7, 1961, pp. 1-40.
  • Han, S. J., Lee, D. H., Kim, K. S., Seo, S. Y., Moon, J. H., and Monteiro, P. J. M., “Degradation of Flexural Strength in Reinforced Concrete Members Caused by Steel Corrosion,” Construction and Building Materials, Vol. 54, No. 1, 2014, pp. 572-583.
  • Gregor, T., and Collins, M. P., “Tests of Large Partially Prestressed Concrete Girders,” ACI Structural Journal, Vol. 92, No. 1, 1995, pp. 63-72.
  • Frosch, A. K., “Behavior of Large-Scale Reinforced Concrete Beams with Minimum Shear Reinforcement,” ACI Structural Journal, Vol. 97, No. 6, 2000, pp. 814-820.
  • Farhidzadeh, A., Dehghan-Niri, E., Salamone, S., Luna, B., and Whittaker, A., “Monitoring Crack Propagation in Reinforced Concrete Shear Walls by Acoustic Emission,” Journal of Structural Engineering, ASCE, Vol. 139, No. 12, 2013, pp. 1-10.
  • Evans, R. H. and Schumacher, E. G., “Shear Strength of Prestressed Beams without Web Reinforcement,” ACI Journal, Proceedings Vol. 60, No. 11, 1963, pp. 1621-1642.
  • Elzanty, A. H., Nilson, A. H., and Slate, F. O., “Shear Capacity of Prestressed Concrete Beams Using High-Strength Concrete,” ACI Journal, Proceedings Vol. 83, No. 3, 1986, pp. 359-368.
  • Elzanty, A. H., Nilson, A. H., and Slate, F. O., “Shear Capacity of Prestressed Concrete Beams Using High-Strength Concrete,” ACI Journal, Proceedings Vol. 83, No. 2, 1986, pp. 290-296.
  • Durrani, A. J., and Robertson, I. N. (1987), “Shear Strength of Prestressed Concrete T Beams with Welded Wire Fabric as Shear Reinforcement,” PCI Journal, Vol. 32, No. 2, pp. 46-61.
  • Dupont, D. and Vandewalle, L., “Calculation of Crack Widths with the s-e Method”, Test and Design Methods for Steel Fibre Reinforced Concrete: Background and Experiences - Proceedings of the RILEM TC162-TDF Workshop, RILEM Technical Committee 162-TDF, Bochum, Germany, 2003, pp. 119-144.
  • Dowell, R. K. and Auer, R., “Flexure-Shear Behavior of Precast Concrete Deck Panels with Cast-in-Place Concrete Topping,” PCI Journal, Vol. 41, No. 3, 2011, pp. 60-74.
  • De Silva, S., Mutsuyoshi, H., and Witchukreangkrai, E., “Evaluation of Shear Crack Width in I-Shaped Prestressed Reinforced Concrete Beams,” Journal of Advanced Concrete Technology, Vol. 6, No. 3, 2008, pp. 443-458.
  • Cucchiara, C., Mendola, L., and Papia, M., “'Effectiveness of stirrups and steel fibres as shear reinforcement,” Cement and Concrete Composites, Vol. 26, No. 7, 2004, pp.777-786.
  • Commission of the European Communities. Eurocode 2: Design of Concrete Structures. General Rules and Rules for Buildings. prEN 1992-1-1 draft. London, UK: The British Standards Institution, 2002.
  • Comit Euro-International du B ton (CEB), CEB-FIP Model Code, Thomas Telford, London, UK, 1991
  • Comit Euro-International du B ton (CEB), CEB-FIP Model Code for Concrete Structures, 3rd Edition, Paris, France, 1978.
  • Collins, M. P., Mitchell, D., Adebar, P., and Vecchio, F. J., “A General Shear Design Method,” ACI Structural Journal, Vol. 93, No. 1, 1996, pp. 36-45.
  • Collins, M. P., Bentz, E. C., and Sherwood, E. G., “Where is Shear Reinforcement Required? Review of Research Results and Design Procedures,” ACI Structural Journal, Vol. 105, No. 5, 2008, pp. 590-599.
  • Collins, M. P. and Mitchell, D., Prestressed Concrete Structures, Prentice-Hall, 1991, 766 pp.
  • Collins, M. P. and Kuchma, D. A., “How Safe Are Our Large, Lightly- Reinforced Concrete Beams, Slabs and Footings?” ACI Structural Journal, Vol. 96, No. 4, 1999, pp. 482-490.
  • Choi, K. K., Reda Taha, M. M., Park, H. G., and Maji, A. K., “Punching Shear Strength of Interior Concrete Slab?Column Connections Reinforced with Steel Fibers,” Cement and Concrete Composites, Vol. 29, No.5, 2007, pp. 409-420.
  • Choi, K. K., Park, H. G., and Wight, J. K., “Unified Shear Strength Model for Reinforced Concrete Beams?Part II: Verification and Simplified Method,” ACI Structural Journal, Vol. 104, No. 2, 2007, pp. 153-161.
  • Choi, K. K., Park, H. G., and Wight, J. K., “Unified Shear Strength Model for Reinforced Concrete Beams?Part I: Development,” ACI Structural Journal, Vol. 104, No. 2, 2007, pp. 142-152.
  • Choi, K. K., Park, H. G., and Wight, J. K., “Shear Strength of Steel Fiber- Reinforced Concrete Bemas without Web Reinforcement,” ACI Structural Journal, Vol. 104, No. 1, 2007, pp. 12-21.
  • Choi, K. K., Park, H. G., and Wight, J. K., “Shear Strength of Steel Fiber- Reinforced Concrete Beams without Web Reinforcement,” ACI Structural Journal, Vol. 104, No. 1, 2007, pp. 12-21.
  • Cho, S. H., “CFT/MCFT from the Viewpoint of Strut-and-Tie Models,” Journal of Korea Concrete Institute, Vol. 10, No. 1, 1998, pp. 40-48. (in Korean)
  • Chen, W. F., Plasticity in Reinforced Concrete, McGraw-Hill, 1982, 474 pp. 37. Kim, K. S. and Lee, D. H., "Flexural Behavior Model for Post-Tensioned Concrete Members with Unbonded Tendons," Computers and Concrete, Vol. 10. No. 3, 2012, pp. 241-258.
  • Cederwall, K., Hedman, O., and Loeberg, A., “Shear Strength of Partially Prestressed Beams with Pretensioned Reinforcement of High Grade Deformed Bars,” ACI Special Publication 42-9, 1974, pp. 215-230.
  • Caldentey, A. P., Peiretti, H. C., Iribarren, J. P., and Soto, A. G., “Cracking of RC members revisited: influence of cover, φ/ρs,ef and stirrup spacing ? an experimental and theoretical study,” Structural Concrete, Vol. 14, No. 1, 2013, pp. 69-78.
  • CSA Committee A23.3, Design of Concrete Structures (CSA A23.3-04), Canadian Standards Association, Mississauga, 2004, 214 pp.
  • CEN, Eurocode 2: Design of Cocnrete Structures ? Part 1-1: General Rules and Rules for Buildings, EN 1992-1-1:2004: E, 2004.
  • Bentz, E. C., Vecchio, F. J., and Collins, M. P., “The Simplified MCFT for Calculating the Shear Strength of Reinforced Concrete Elements,” ACI Structural Journal, Vol. 103, No. 4, 2006, pp. 614-624.
  • Bentz, E. C. and Buckley, S., “Repeating a Classic Set of Experiments on Size Effect in Shear of Members without Stirrups,” ACI Structural Journal, Vol. 102, No. 6, 2005, pp. 832-838.
  • Bent, E. C. and Collins, M. P., User Manual of Response-2000 Ver. 1.1, 2001.
  • Bennett, E. W., and Debaiky, S. Y., “High-Strength Steel as Shear Reinforcement in Prestressed Concrete Beams,” Shear in Reinforced Concrete, ACI SP-42, American Concrete Institute, 1974, pp. 231-248.
  • Bennett, E. W., and Balasooriya, B. M. A., “Shear Strength of Prestressed Beams with Thin Webs Failing in Inclined Compression,” ACI Journal, Proceedings Vol. 68, No. 3, 1971, pp.204-212.
  • Batson, G., Jenkins, E., and Spatney, R., “Steel Fibers as Shear Reinforcement in Beams,” ACI Journal, Proceedings Vol. 69, No. 10, 1972, pp. 640-644.
  • Ba?ant, Z. P. and Kazemi, M. T., “Size effect on diagonal shear failure of beams without stirrups.” ACI Structural Journal, Vol. 88, No. 3, 1991, pp. 268-276.
  • Ashour, S. A., Hassanain, G. S., and Wafa, F. F., “Shear Behavior of High- Strength Fiber Reinforced Concrete Beams,” ACI Structural Journal, Vol. 89, No. 2, 1992, pp. 176-184.
  • Alwan, J. M., Naaman, A. E., and Hansen, W., “Pullout Work of Steel Fibers From Cementitious Composites: Analytical Investigation,” Cement and Concrete Composites, Vol. 13, No. 4, 1991, pp. 247-255.
  • Al-Alusi, A. F., “Diagonal Tension Strength of Reinforced Concrete T-Beams with Varying Shear Span,” ACI Journal, Proceedings Vol. 54, No. 11, 1957, pp. 1067-1077.
  • Adebar, P. E. and Collins, M. P., “Shear Strength of Members without Transverse Reinforcement,” Canadian Journal of Civil Engineering, Vol. 23, No. 1, 1996, pp. 30-41.
  • ACI Committee 318, Building Code Requirements for Structural Concrete and Commentary (318M-11), American Concrete Institute, Farmington Hills, Mich., 2011, 503 pp.
  • AASHTO, AASHTO-LRFD Bridge Design Specifications and Commentary, 3rd Edition, American Association of State Highway Transportation Officials, Washington, D.C., 2004, 1264 pp.